Swann NHD-881 Bedienungsanleitung

Swann Überwachungskamera NHD-881

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann NHD-881 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
M881CAMVER1E | © Swann 2017
Helpdesk & Technical Support
Technical Support E-mail: tech@swann.com
Technical Support Website: support.swann.com
Telephone Helpdesk
USA Toll Free 1-800-627-2799
USA Parts & Warranty 1-800-627-2799
(M-F, 9am-5pm US PT)
AUSTRALIA 1800 788 210
NEW ZEALAND Toll Free 0800 479 266
UK 0808 168 9031
Swann Communications warrants this product against defects in workmanship and material for a period of
one (1) year from its original purchase date. You must present your receipt as proof of purchase for warranty
validation. Any unit which proves defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred
to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when
shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use of or
the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman
or other person or any other costs associated with its use are the responsibility of the end user. This warranty
applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end
user or third party modifications to any component will render all warranties void. By law some countries do not
allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal
rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may cause undesired op-
eration.
4K Ultra HD
Security Camera
4K Dome Camera for Ultra HD Network Video Recorders
EN INSTRUCTION MANUAL
Security Made Smarter
Security Made Smarter
Limited Warranty - Terms & Conditions5 FCC Verification6
2. Position the dome base in the location you want to mount to
then mark the mounting holes on the surface to position the
screws (mounting template included). Using the appropriate
screws for the surface you are mounting to, screw the dome base
into place.
3. To adjust the camera to the desired focal position, use a
Phillips head screwdriver to loosen the lock screw.
4. The dome enclosure can be rotated left or right and the dome
camera can be aimed in almost any direction from wherever you
choose to mount it. Check the image on your NVR and make
adjustments as necessary to ensure the best coverage.
5. Make sure the camera’s focal position is always facing up (you
will see UP indented on the camera) otherwise the image will be
upside down. When finished, tighten the lock screw to secure the
camera’s position.
6. Rotate the dome ring counter clockwise (if mounted
horizontally) or clockwise (if mounted vertically) to lock it in place.
Introduction
Congratulations on the purchase of your Swann Ultra
HD Camera.
• The camera has a cutting edge EXIR infrared
LED that emits a rectangular pattern for a more
crisp & even night vision image
• See everything with Swann’s 4K Ultra HD Day/
Night camera in a super wide 75° field of view,
allowing you to see detail you might otherwise
miss
• With discreet dome styling & sturdy aluminium
construction, the camera suits any conditions
with weather resistant rating of IP67 for indoor
& outdoor use
• This camera can only be used in combination
with Swann’s Ultra HD Network Video Record-
ers including NVR8-8000™ & NVR16-8000™ for
cutting-edge IP surveillance in amazing 4K
Important instructions
1. Make sure the camera is fixed correctly and stable
if fastened in place.
2. Never place strain of any kind on the network cable
connection. It’s designed to clip into the Ethernet port,
but it won’t support weight and can be broken.
3. Do not operate if wires and terminals are exposed.
Please note: Have a look at the camera location tips
included with your NVR, to select the best location for
your camera (the camera location tips provided here
are for general purpose only).
Important note: All jurisdictions have specific laws
and regulations relating to the use of cameras. Before
using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras.
1. Take into consideration what you want to monitor
and where you’ll get the best view of it.
2. How you’re going to connect the camera to your
monitoring system; remember that cables and
connections should be kept out of the weather.
3. How to keep the camera out of harm’s way. It’s
recommended to mount your camera at an elevated
position.
4. Place your camera as close to the area of interest
as practicable. The best position is from about
13ft/4m above looking slightly down, keeping in mind
the details you are looking for.
5. Although the sky looks nice when you look at the
live view from your camera, it is an unlikely direction
for an offender to approach. Make sure your camera
has minimal sky in it as the light in daylight can make
the foreground of the image darker.
6. Think about the most likely way a potential offender
may approach your home, use your camera to give
you the best coverage of these areas.
7. The camera’s casing is resistant to different
weather conditions and tampering. It would take an
overwhelming event to damage the housing.
8. Even though the camera is weather and water-
resistant, prolonged exposure to adverse weather
conditions such as sunlight or excessive moisture,
may eventually damage the internal components of
the camera and adversely affect its performance.
9. Run cables inside a wall cavity or other protected
enclosure, and ensure that all wiring and connectors
are insulated and protected from moisture.
10. Don’t put your cable near live electrical wiring. AC
electricity generates radio “noise” which can interfere
with the signal from your camera.
1 Connecting the Camera2 Mounting the Camera3 Camera Location Tips4
To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the
camera then plug the other end of the cable into one of the IP camera inputs on the back of your NVR.
AU DIO O UT
AU DIO I N
VGA
LAN
1
139 10
2
11
3 4
12
5 6
14
7
15 16
8
IN
ALARM
OUT
1 2 3 4 G G G1
Power
Ethernet Cable
LAN
Dome Enclosure
Dome Ring
Please note: The power connector is provided as an alternative power option if required. Your NVR will
provide power over the Ethernet cable when connected and a separate power adapter is not required.
Mounting
Hole Lock Screw
Mounting
Hole
The camera can be mounted onto a flat
surface using the screws and wall plugs
provided. The surface must have sufficient
strength to hold the camera.
1. Rotate the dome ring counter clockwise
and lift it up to remove it from the camera.

Produktspezifikationen

Marke: Swann
Kategorie: Überwachungskamera
Modell: NHD-881

Brauchst du Hilfe?

Wenn Sie Hilfe mit Swann NHD-881 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Swann

Swann

Swann SWNHD-866MSD Bedienungsanleitung

3 Oktober 2024
Swann

Swann SW312-HMD-CA Bedienungsanleitung

16 September 2024
Swann

Swann PRO-A851 Bedienungsanleitung

15 September 2024
Swann

Swann PRO-760 Bedienungsanleitung

10 September 2024
Swann

Swann Pro-535 Bedienungsanleitung

31 August 2024
Swann

Swann Pro DVR8-4000 Bedienungsanleitung

27 August 2024
Swann

Swann PRO-743 Bedienungsanleitung

27 August 2024
Swann

Swann SWDVK-846806SL Bedienungsanleitung

24 August 2024
Swann

Swann Enforcer SWPRO-4KMQB Bedienungsanleitung

18 August 2024
Swann

Swann SWIFI-PTCAM232GB Bedienungsanleitung

12 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024