Supermicro X9DAi Bedienungsanleitung
Supermicro
Hauptplatine
X9DAi
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X9DAi (111 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/111
USER’S MANUAL
Revision 1.20a
X9DAi
Manual Revision 1.20a
Release Date: December 8, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
This manu al is writt en fo r sys tem in tegr ators , PC te chn icia ns a nd
knowledgeable PC users. It provides information for the installation and use of the
X9DAi motherboard.
About This Motherboard
The Super X9DAi motherboard supports dual Intel E5-2600(v2) Series Processors
(Socket R LGA 2011) that offer QPI (Intel QuickPath Interface) Technology (V.1.1),
providing point-to-point connection with a transfer speed of up to 8.0 GT/s. With
the C602 chipset built in, the X9DAi motherboard provides support for Intel Rapid
Storage Technology, Digital Media Interface (DMI), PCI-E Gen. 3.0, and up to 1866
MHz DDR3 memory, greatly enhancing system performance for workstations and
servers. This motherboard is ideal for high-end workstations. Please refer to our
website (http://www.supermicro.com) for processor and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board. It also provides detailed information about the Intel C602 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules, and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software installation instructions.
Preface
iii
Produktspezifikationen
Marke: | Supermicro |
Kategorie: | Hauptplatine |
Modell: | X9DAi |
Prozessorhersteller: | Intel |
WLAN: | Nein |
Breite: | 305 mm |
Tiefe: | 332 mm |
Anzahl USB 2.0 Anschlüsse: | 4 |
Betriebstemperatur: | 10 - 35 °C |
Relative Luftfeuchtigkeit in Betrieb: | 8 - 90 % |
Eingebauter Ethernet-Anschluss: | Ja |
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 2 |
Temperaturbereich bei Lagerung: | -40 - 70 °C |
Luftfeuchtigkeit bei Lagerung: | 5 - 95 % |
Audio Kanäle: | 7.1 Kanäle |
RAID Level: | 0, 1,5, 10 |
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A: | 4, 2 |
Gehäusetyp: | 3U, 4U, Tower |
Systembus-Rate: | 8 GT/s |
Prozessorsockel: | LGA 2011 (Socket R) |
Interner Speichertyp: | DIMM |
Motherboardformfaktor: | Erweitertes ATX |
Motherboard Chipsatz: | Intel® C602 |
Komponente für: | Server |
Unterstützte Arbeitsspeicher: | DDR3-SDRAM |
ECC: | Ja |
Ohne ECC: | Ja |
Unterstützte Arbeitsspeichergeschwindigkeit: | 800,1066,1333,1600 MHz |
RAM-Speicher maximal: | 512 GB |
Unterstützte Speicherlaufwerk-Schnittstellen: | SATA II, SATA III |
Parallele Verarbeitungstechnologie: | Nicht unterstützt |
Anzahl PS/2 Anschlüsse: | 1 |
SATA III Anschlüsse: | 2 |
Anzahl USB 2.0 Schnittstellen: | 7 |
Zahl der Chassisventilatorstecker: | 8 |
Chassis Intrusion Stecker: | Ja |
BIOS-Speichergröße: | 128 Mbit |
BIOS-Typ: | AMI |
ACPI-Version: | 4.0 |
Ethernet Schnittstellen Typ: | Gigabit Ethernet |
Nachhaltigkeitszertifikate: | RoHS |
Anzahl serielle Anschlüsse: | 1 |
PCI-Express-Slots-Version: | 3.0 |
Eingebaute Grafikadapter: | Nein |
SATA II Anschlüsse: | 8 |
PCI-Express x16-Slots: | 3 |
Anzahl IEEE 1394/Firewire Anschlüsse: | 2 |
Speicherspannung: | 1.35, 1.5 V |
Anzahl unterstützter Prozessoren: | 2 |
PCI-Express x4-Slots: | 1 |
PCI-Express x8-Slots: | 2 |
Zahl der DIMM Slots: | 16 |
Intel® Xeon-Serie: | E5-2600 |
Unterstützte DIMM-Modulkapazitäten: | 16GB, 1GB, 2GB, 32GB, 4GB |
Anzahl der unterstützten Prozessorkerne: | 6, 8 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X9DAi benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Supermicro
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024