Supermicro X8SAX Bedienungsanleitung

Supermicro Hauptplatine X8SAX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X8SAX (101 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/101

USER’S MANUAL

Revision 1.2a

X8SAX

C7X58

Manual Revision 1.2a

Release Date: September 23, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, you are encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

This manual is w ritten f o r system i n tegrator s , PC tec h n i cians and

knowledgeable PC users. It provides information for the installation and use of the

X8SAX/C7X58 motherboard.

About This Motherboard

The X8SAX/C7X58 supports the Intel® Core™ i7 / i7 Extreme Edition, and

Intel® Xeon® 5500/3500 series processors. Xeon® 5600/3600 series processors

are supported on PCB Rev. 2.0 with BIOS 2.0 and above. It is the rst platform that

supports the Intel QuickPath Interconnect technology, providing the next genera-

tion point-to-point system interface, replacing the current Front Side Bus. With the

Intel X58 Express Chipset platform built-in, the X8SAX/C7X58 offers substantial

enhancement in system performance with increased bandwidth and unprecedented

scalability, optimized for intensive-applications and high-end workstations. Please

refer to our web site (http://www.supermicro.com/products/) for updates on sup-

ported processors.

This product is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists Other Software Program Installation

Appendix C provides BIOS Recovery Instructions.

Preface

iii

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	X8SAX
Prozessorhersteller:	Intel
Breite:	3050 mm
Tiefe:	2540 mm
Energiequelle:	ATX
Anzahl USB 2.0 Anschlüsse:	12
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Audio Kanäle:	7.1 Kanäle
RAID Level:	0, 1,5, 10
Prozessorsockel:	Socket B (LGA 1366)
Motherboardformfaktor:	ATX
Audio-Chip:	Realtek ALC883
Anzahl der Speichersteckplätze:	6
ECC:	Ja
Ohne ECC:	Ja
RAM-Speicher maximal:	24 GB
Anzahl PS/2 Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	12
BIOS-Speichergröße:	32 Mbit
LAN-Controller:	Intel® 82574L
Anzahl serielle Anschlüsse:	2
PCI-Express x16-Slots:	2
Speicherspannung:	1.5 V
SATA Anschlüsse:	6
PCI-Express x4-Slots:	1
Redundante Controller:	SATA
PCI-X-Slots:	2