Supermicro X8DTL-3F Bedienungsanleitung

Supermicro Hauptplatine X8DTL-3F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X8DTL-3F (101 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/101

X8DTL-3

X8DTL-i

USER’S MANUAL

Revision 1.0a

X8DTL-3F

X8DTL-iF

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0a

Release Date: June 2, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTL-3/

X8DTL-i/X8DTL-3F/X8DTL-iF motherboard.

About this Motherboard

The X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF supports the Intel® 5500 Se-

ries Processor, the ﬁ rst dual-processing platform that supports the Intel QuickPath

Interconnect (QPI) Technology, providing the next generation point-to-point system

interface to replace the current Front Side Bus. With the Intel 5500 Series Processor

built in, the X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF substantially enhances system

performance with increased bandwidth and unprecedented scalability optimized for

high-end HCP/Cluster systems and intensive applications. Please refer to our web

site (http://www.supermicro.com/products/) for updates on supported processors.

This product is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes and . Appendix B Appendix C provide

the Windows OS and Other Software Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

iii

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	X8DTL-3F
Prozessorhersteller:	Intel
Breite:	305 mm
Tiefe:	254 mm
Energiequelle:	ATX
Anzahl USB 2.0 Anschlüsse:	2
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	3
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Grafikkarte:	G200eW
RAID Level:	0, 1,10
Prozessorsockel:	Socket B (LGA 1366)
Anzahl VGA (D-Sub) Anschlüsse:	1
Motherboardformfaktor:	ATX
Motherboard Chipsatz:	Intel® 5500
Anzahl der Speichersteckplätze:	6
ECC:	Ja
RAM-Speicher maximal:	24 GB
Anzahl PS/2 Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	3
BIOS-Typ:	AMI
Mitgelieferte Software:	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
Anzahl serielle Anschlüsse:	1
PCI-Slots:	2
Weitere Anschlüsse:	8 x SAS
Netzwerkfunktionen:	Gigabit Ethernet
Speicherspannung:	1.5 V
SATA Anschlüsse:	6
(2.) Controller-Schnittstelle:	SAS
PCI-Express x4-Slots:	2
PCI-Express x8-Slots:	2
Redundante Controller:	SATA
IPMI 2.0-Slot:	Ja