Supermicro X6DVL-INF Bedienungsanleitung
Supermicro
Hauptplatine
X6DVL-INF
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X6DVL-INF (106 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/106
®
X6DVL-INF
X6DVL-iG2
USER’S MANUAL
Revision 1.0
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be
contained in this document, makes no commitment to update or to keep current the
information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please
see our web site at www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated
or reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of
Santa Clara shall be the exclusive venue for the resolution of any such disputes.
Supermicro's total liability for all claims will not exceed the price paid for the hardware
product.
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2005 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use
of the X6DVL-INF/X6DVL-iG2 motherboard. The X6DVL-
INF/X6DVL-iG2 supports single or dual Intel® Xeon EM64T processors at a
800 MHz front side bus. Based upon Intel's NetBurst microarchitecture, the
Xeon EM64T processor supports IA-32 and IA-64 software and includes
features found in the XeonTM processor such as Hyper Pipelined Technol-
ogy, allowing the processor to operate at much higher core frequencies.
The X6DVL-INF/X6DVL-iG2 supports the Hyper-Threading Technology (HT),
the EM64T Technology, the Enhanced Intel SpeedStep Technology (EIST)
and is ideal for server or clustering environments. Please refer to the moth-
erboard specifications pages on our web site (http: //www.supermicro.com/
products/motherboard) for updates on supported processors. This product
is intended to be professionally installed.
Manual Organization
Chapter 1 describes the features, specifications and performance of the
motherboard and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter
when you want to install the processor, memory modules and other compo-
nents into the chassis. When you encounter a problem, read Chapter 3,
which describes troubleshooting procedures for the video, the memory and
the setup configuration stored in CMOS.
Chapter 4 includes an introduction to BIOS and provides detailed informa-
tion on running the CMOS Setup utility.
Appendix A lists BIOS Error Beep Codes and BIOS POST Messages.
Appendix B provides BIOS POST codes.
Appendix C provides software installation instructions.
Conventions Used in this Manual
Special attention shall be given to the following symbols for proper
installation and to prevent damage to the components or injury to yourself.
Danger/Caution: Instructions to be strictly followed to prevent
catastrophic system failure or to avoid bodily
injury.
Warning: Instructions given to ensure proper system installation or
to prevent damage to the components.
(*Note): Note: Additional information given to differentiate various models
or to ensure correct system setup.
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Hauptplatine |
| Modell: | X6DVL-INF |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X6DVL-INF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Supermicro
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024