Supermicro X6DAL-XG Bedienungsanleitung

Supermicro Hauptplatine X6DAL-XG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X6DAL-XG (108 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/108

X6DAL-XG

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. SUPER MICRO COMPUTER assumes no responsibility for any inaccuracies that

may be contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.Please

Note: For the most up-to-date version of this manual, please see our web site at

www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,

INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA.The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes.

Supermicro's total liability for all claims will not exceed the price paid for the hardware

product.

*California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. "Perchlo-

rate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/perchlorate."

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other reproduc-

tive harm.

*FCC Statement: This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the manufacturer’s instruction manual, may cause interference with

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, you are encouraged

to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and the receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

· Consult the dealer or an experienced radio/television technician for help.

Revision Number: Rev. 1.0a

Release Date: July 30, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the X6DAL-XG motherboard. The X6DAL-XG sup-

ports single or dual Intel® Xeon NoconaTM processors at a 8 00 MHz front

side bus. Based upon Intel's NetBurst microarchitecture with EM64T sup-

port, the Nocona processor supports IA-32 and IA-64 software and in-

cludes features found in the XeonTM processor such as Hyper Pipelined

Technology, which includes a multi-stage pipeline, allowing the processor

to operate at much higher core frequencies. Packaged in a 604-pin Flip

Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion

Force(ZIF) socket (mPGA 604), the Nocona Processor (800 MHz) supports

Hyper-Threading Technology and is ideal for high performance workstation

and server environments with up to two processors on one system bus.

Please refer to the motherboard specifications pages on our web site (http:/

/www.supermicro.com/products/motherboard/) for updates on supported

processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the mainboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE

interfaces, the serial ports, the keyboard and mouse, the power supply and

various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ [Frequently Asked

Questions] section is provided.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A lists BIOS Error Beep Codes and DS LED POST Codes.

Appendix B provides BIOS POST codes.

Appendix C provides software installation instructions.

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	X6DAL-XG
Prozessorhersteller:	Intel
Breite:	305 mm
Tiefe:	254 mm
Energiequelle:	ATX
Kopfhörerausgänge:	1
Anzahl USB 2.0 Anschlüsse:	4
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Audio Kanäle:	6.1 Kanäle
Mikrofon-Eingang:	Ja
Kompatible Betriebssysteme:	Windows2000, Windows2003, xp, Linux, Fedora
RAID Level:	0, 1
Prozessorsockel:	mPGA4
Motherboardformfaktor:	ATX
Motherboard Chipsatz:	Intel® E7525
Anzahl der Speichersteckplätze:	6
ECC:	Ja
RAM-Speicher maximal:	24 GB
Anzahl PS/2 Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	2
CPU Ventilatorstecker:	Ja
BIOS-Speichergröße:	64 Mbit
LAN-Controller:	Intel® 82541GI
Mitgelieferte Software:	Super Doctor III, Watch Dog\n
Anzahl serielle Anschlüsse:	2
Power Fan Connector:	Ja
Anzahl Parallelanschlüsse:	1
Anzahl eSATA-Anschlüsse:	2
SATA Anschlüsse:	2
Diskettenlaufwerkstecker:	Ja
Erweiterungssteckplätze:	PCI-Express 1(x16), PCI-X 2x(64-bit/66MHz), PCI-2x(32-bit/33MHz)