Supermicro X12DPT-PT6 Bedienungsanleitung
Supermicro
Hauptplatine
X12DPT-PT6
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro X12DPT-PT6 (30 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/30
USER'S GUIDE
Revision 1.0
Firmware Update and Manual
recovery Instructions
for
The X12MP/X12DP/X12SP/B12/H12/
BH12 Motherboards
The information in this user’s guide has been carefully reviewed and is believed to be accurate. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to
update or to keep current the information in this user’s guide, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this user’s guide, please see our website at www.supermicro.
com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this
user’s guide at any time and without notice. This product, including software and documentation, is the property of
Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not
allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING, OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in an industrial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
User’s Guide Revision 1.0
Release Date: April 27, 2021
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2020 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Note: Important Information is given for proper system setup or for proper îšżrmware
conîšżguration.
Preface
Preface
About This Manual
This user's guide is written for system integrators, IT technicians, and knowledgeable end
users. It provides îšżrmware update and manual recovery instructions for the Supermicro
X12MP/X12DP/X12SP*/B12/H12/BH12 motherboards. (*See Note 1 below.)
About This User's Guide
This user's guide provides hands-on, practical instructions on how to update and perform
manual recovery on the firmware used in the X12MP/X12DP/X12SP/B12/H12/BH12
motherboards that are built upon the 3rd Gen Intel® Xeon® Scalable series processors**
and the AMD EPYC 7000 series processors**. (See Note 2 below.) This user's guide focuses
on the BIOS/BMC/CPLD update and manual recovery using the Baseboard Management
Controller (BMC) via WebGUI (Graphical User Interface), which is a exible management
system that allows an IT administrator to arrange the contents, page layouts, and features
of a web page based on the user's skill set and needs in an e󰀨ort to enhance user interface
experience and maximize platform utility.
To best utilize our products, please bear in mind that all Supermicro products are intended to
be installed, conîšżgured, and serviced by professional technicians only. For processor/memory
updates, please refer to our website at http://www.supermicro.com/products/.
Note 1: The X12SP series motherboards support îšżrmware update and recovery
using the BMC via WebGUI except the X12SPA-TF motherboard.
Note 2: The X12MP/X12DP/X12SP/B12 series motherboards support the 3rd Gen
Intel Xeon Scalable series processors, while the H12/BH12 series motherboards
support the AMD EPYC 7003/7002 series processors.
Conventions Used in the Manual
Special attention should be given to the symbol below to properly conîšżgure your BIOS settings
and to avoid causing damage to your system or injury to yourself:
Warning! Indicates important information is given to avoid possible damages to the
system or injuries to yourself.
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Hauptplatine |
| Modell: | X12DPT-PT6 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X12DPT-PT6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Supermicro
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024