Supermicro X11SPL-F Bedienungsanleitung
Supermicro
Hauptplatine
X11SPL-F
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro X11SPL-F (2 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities:
https://www.supermicro.com/wftp/driver
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2019 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P cackage ontents
X11SPL-F
Quick Reference Guide Rev. 1.1
• One (1) Supermicro Motherboard
• Six (6) SATA Cables
• One (1) I/O Shield
• One (1) Quick Reference Guide
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
F or your system to work properly please download appropriate,
drivers images user s manual From the links below/ / ' :
MNL-1950-QRG-110
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
Connectors
Back Panel I/O Connectors
Memory Support
LED Indicators
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.
Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
Front Control Panel (JF1)
CPU Support
1
5
1
9
1
4
1
8
1
31
7
1
2
1
6
1
1
The X11SPL-F motherboard supports the Intel® Xeon 81xx/61xx/51xx/41xx/31xx and
82xx/62xx/52xx/42xx/32xx series (Socket P0-LGA3647) processor with up to 28 cores
and a thermal design power (TDP) of up to 165W.
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)
JPL2 LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watchdog Timer Pins 1-2 (Reset)
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1 ~ FAN5, FANA/FANB CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA7 PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)Intel®
I-SGPIO1, I-SGPIO2 Serial Link General Purpose I/O Connection Headers
JD1 Speaker/Power LED Indicator
(Pins 1-3: Power LED, Pins: 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I2C Header (for an IPMI Card)
JL1 Chassis Intrusion Header
JNVI2C1 NVMe I2C Header
JOH1 Overheat LED Indicator
JPI2C1 Power System Management Bus (SMB) I2C Header
JPWR1 8-pin 12V CPU Power Connector
JPWR2 24-pin ATX Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1, LAN2 Dual 1G Base-T Ports
M.2 M.2 PCI-E 3.0 p1-x4 or SATA 3.0 Slot (Supports M-Key 2280 and 22110)
MH10, MH11 M.2 Mounting Holes
SLOT1 PCH PCI-E 3.0 p1-x4 (in x8) Slot
SLOT2, SLOT3, SLOT5, SLOT7 CPU PCI-E 3.0 p1-x8 Slot
SLOT4, SLOT6 CPU PCI-E 3.0 p1-x8 (in x16) Slot
SP1 Internal Speaker/Buzzer
UID-SW Unit Identiîšżer (UID) Switch
USB0/1 Back Panel Universal Serial Bus (USB) 2.0 Ports
USB2/3, USB4/5,USB6/7 Front Accessible USB 2.0 Headers
USB8/9 Back Panel USB 3.0 Ports
USB10/11 Front Accessible USB 3.0 Header
USB12 USB 3.0 Type-A Header
VGA VGA Port
LED Description Status
LE3 M.2 LED Blinking Green: Device Working
LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal
LEDPWR Onboard Power LED Solid Green: Power On
UID-LED Unit Identiîšżer (UID) LED Solid Blue: Unit Identiîšżed
# #Description Description
1 6COM Port 1 USB8 (3.0)
2 7Dedicated IPMI LAN LAN1
3 8USB1 LAN2
4 9USB0 VGA Port
5 USB9 (3.0) UID Switch10
= mounting hole
DESIGNED IN USA
BIOS
LICENSE
X11SPL-F
REV:1.01
IPMI CODE
MAC CODE
BAR CODE
+
+
VGA
Intel
C621
JPWR1
JTPM1
MH11
MH10
JRK1
SP1
LEDBMC
LE3 LEDPWR
JL1
JOH1
JBT1
JSTBY1
JSD1
JSD2
JPL2
JPL1
JWD1
JPG1
JPME2
JIPMB1
JNVI2C1
FAN4
FAN3
FAN2
FAN1
FANA
FANB
FAN5 JPI2C1
JD1
I-SGPIO2
I-SGPIO1
I-SATA4
I-SATA5
I-SATA6
I-SATA7
I-SATA0 I-SATA1
I-SATA2
I-SATA3
JF1
JPWR2
ASpeed
AST2500
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT7 PCI-E 3.0 X8 USB6/7
M.2 PCI-E 3.0 X4
USB12 (3.0)
USB10/11(3.0)
USB8/9(3.0)
USB4/5
USB2/3
COM1
COM2
USB0/1
IPMI_LAN
LAN1LAN2
UID-SW
UID-LED
PCH SLOT1 PCI-E 3.0 X4(IN X8)
CPU SLOT2 PCI-E 3.0 X8
CPU SLOT3 PCI-E 3.0 X8
CPU SLOT4 PCI-E 3.0 X8(IN X16)
CPU SLOT6 PCI-E 3.0 X8(IN X16)
BT1
CPU
DIMMF1
DIMME1
DIMMD1
DIMMA2
DIMMA1
DIMMB1
DIMMC1
RST
JF1
ONPWR UIDLEDPSFAIL 1NIC2NIC NMIXPWRHDD LEDLED
DIMMD2
LED Indicators
Jumpers
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
UID SW
3.3V Stby
19
X
Ground
X
3.3V Stby
20
1 2
Ground
NIC2 Active LED
NMI
3.3V
3.3V
Power Fail LED
OH/Fan Fail LED
Ground
1
10
Motherboard Layout and Features Connectors and Jumpers
Assemble the processor carrier assembly by inserting
the CPU into the processor carrier.
A
A
B
B
Pin 1
Align CPU Pin 1
CPU (Upside Down)
with CPU LGA Lands up
Processor Carrier
(Upside Down)
Align Point B of the CPU and
Point B of the Processor Carrier
Align Point A of the CPU and
Point A of the Processor Carrier
CPU and PHM Installation
Heatsink
(Upside Down)
1
2
1
2
Triangle on the CPU
Triangle on the
Processor Carrier
To form the processor heatsink module (PHM), mount
the processor carrier assembly onto the heatsink and
snap into place.
1
1
1
2
#1 #2
#3
#4
Small Guide Post
Large Guide PostOval D
T30 Torx Screwdriver
Use a torque
of 12 lbf-in
Oval C
Printed Triangle
Mounting the Processor Heatsink Module
onto the CPU socket (on the motherboard)
T e screws in ighten th
the sequence of 1, 2, 3, 4
After assembling the PHM, mount it onto the CPU
socket of the motherboard. Use a T-30 Torx-bit
screwdriver to gradually install four screws into the
mounting holes from #1-4.
1
3
The X11SPL-F supports up to 512GB of RDIMM, 1TB of LRDIMM, and 2TB of 3DS
LRDIMM DDR4 (288-pin) ECC memory with speeds of up to 2933MHz in eight memory
slots. See below for additional memory information.
• The blue slots must be populated rst. Only populate DIMMA2 and DIMMD2 if needed.
• Always use DDR4 memory of the same type, size and speed. Mixed DIMM speeds
can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
• The motherboard will support odd-numbered modules (one or three modules in-
stalled). However, to achieve the best memory performance, a balanced memory
population is recommended.
• Memory capacity and frequency is CPU dependent.
• 2933MHz memory is supported by the 82xx/62xx series processors.
1 CPU, 8-DIMM Slots
Number of DIMMs Memory Population Sequence
1 DIMMA1
2 DIMMA1 / DIMMD1
3 DIMMC1 / DIMMB1 / DIMMA1
4 DIMMB1 / DIMMA1 / DIMMD1 / DIMME1
5
(Unbalanced: Not Recommended) DIMMC1 / DIMMB1 / DIMMA1 / DIMMD1 / DIMME1
6 DIMMC1 / DIMMB1 / DIMMA1 / DIMMD1 / DIMME1 / DIMMF1
7
(Unbalanced: Not Recommended) DIMMC1 / DIMMB1 / DIMMA1 / DIMMA2 / DIMMD1 / DIMME1 / DIMMF1
8 DIMMC1 / DIMMB1 / DIMMA1 / DIMMA2 / DIMMD2 / DIMMD1 / DIMME1 / DIMMF1
Produktspezifikationen
Marke: | Supermicro |
Kategorie: | Hauptplatine |
Modell: | X11SPL-F |
Prozessorhersteller: | Intel |
WLAN: | Nein |
Breite: | 304.8 mm |
Tiefe: | 243.8 mm |
Anzahl USB 2.0 AnschlĂĽsse: | 2 |
Betriebstemperatur: | 0 - 50 °C |
Relative Luftfeuchtigkeit in Betrieb: | 8 - 90 % |
Anzahl Ethernet-LAN-AnschlĂĽsse (RJ-45): | 2 |
Warentarifnummer (HS): | 84733020 |
Temperaturbereich bei Lagerung: | -40 - 70 °C |
Luftfeuchtigkeit bei Lagerung: | 5 - 95 % |
RAID-UnterstĂĽtzung: | Ja |
RAID Level: | 0, 1,5, 10 |
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der AnschlĂĽsse vom Typ A: | 2 |
Prozessorsockel: | LGA 3647 (Socket P) |
Anzahl VGA (D-Sub) AnschlĂĽsse: | 1 |
Motherboardformfaktor: | ATX |
Motherboard Chipsatz: | Intel® C621 |
Komponente fĂĽr: | Server |
UnterstĂĽtzte Arbeitsspeicher: | DDR4-SDRAM |
UnterstĂĽtzte Arbeitsspeichergeschwindigkeit: | 1600,1866,2133,2400,2666 MHz |
RAM-Speicher maximal: | 2048 GB |
UnterstĂĽtzte Speicherlaufwerk-Schnittstellen: | SATA III |
Anzahl USB 2.0 Schnittstellen: | 6 |
USB 3.2 Gen 1 (3.1 Gen 1) AnschlĂĽsse: | 3 |
BIOS-Typ: | UEFI AMI |
ACPI-Version: | 6.0 |
Ethernet Schnittstellen Typ: | Gigabit Ethernet |
Mitgelieferte Software: | Intel® Node Manager, IPMI2.0, KVM w/ dedicated LAN, NMI, SPM, SUM, SuperDoctor® 5, Watchdog |
On-Board Grafikadaptermodell: | Aspeed AST2500 |
Speicherspannung: | 1.2 V |
Zahl der COM Stecker: | 1 |
Anzahl unterstĂĽtzter Prozessoren: | 1 |
PCI-Express x4 (Gen 3.x)-AnschlĂĽsse: | 1 |
Anzahl COM-AnschlĂĽsse: | 1 |
Zahl der DIMM Slots: | 8 |
PCI-Express x8 (Gen 3.x)-AnschlĂĽsse: | 6 |
Maximaler RDIMM Speicher: | 256 GB |
Prozessor Verlustleistung (max): | 165 W |
Anzahl der unterstĂĽtzten Prozessorkerne: | 28 |
Ethernet/LAN: | Ja |
Maximale LRDIMM Speicher: | 512 GB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro X11SPL-F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Supermicro
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024