Supermicro X10SDV-16C-TLN4F+ Bedienungsanleitung

Supermicro Hauptplatine X10SDV-16C-TLN4F+

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro X10SDV-16C-TLN4F+ (113 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/113

X10SDV-8C-TLN4F+

X10SDV-12C-TLN4F+

X10SDV-16C-TLN4F+

USER’S MANUAL

1.0

The information in this user’s manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision: 1.0

Release Date: July 22, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manual is wr i tt e n for s y stem i n t e g r a t o r s , IT techn i c i a ns and

knowledgeable end users. It provides information for the installation and use of the

X10SDV Mini-ITX Series motherboard.

About This Motherboard

The X10SDV Mini-ITX SFP+ series motherboard supports an Intel

® Xeon®

D-1500 series SoC (System-on-a-Chip) processor in a BGA package. The X10SDV

Mini-ITX SFP+ series motherboard addresses a low-power, high-density infrastruc-

ture need with either 8/12/16 Xeon cores, up to 128 GB of addressable memory,

two integrated 10G SFP+ ports, two 1 Gigabit Intel Ethernet ports, M.2 SSD, Intel

Rapid Storage Technology Enterprise (RSTe), USB 3.0 and a thermal design from

35 to 65 watts. The X10SDV Mini-ITX SFP+ series motherboards provide software

consistency from the data center to the storage and network edge with the same

instruction set as the robust Xeon processor.

Please refer to our website at (http://www.supermicro.com/products/) for memory

support updates. This product is intended to be installed and serviced by profes-

sional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information on the Intel Xeon D-1500 Series processor.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Appendix D contains Dual Boot Block instructions.

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	X10SDV-16C-TLN4F+
Prozessorhersteller:	Intel
Anzahl Prozessorkerne:	16
Breite:	170 mm
Tiefe:	170 mm
Energiequelle:	ATX
Betriebstemperatur:	0 - 60 °C
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	5
Audio Kanäle:	- Kanäle
Prozessor-Taktfrequenz:	1.7 GHz
Prozessor:	D-1587
RAID Level:	0, 1,5, 10
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	2
Prozessorsockel:	BGA 1667
Intel® Turbo-Boost-Technologie:	2.0
Anzahl VGA (D-Sub) Anschlüsse:	1
Kompatible Prozessoren:	Intel® Xeon®
Motherboardformfaktor:	mini ITX
PC Gesundheitsüberwachung:	FAN, LED, Power supply, Temperature, Voltage
Unterstützte Arbeitsspeicher:	DDR4-SDRAM
Anzahl der Speichersteckplätze:	4
Arbeitsspeicher Typ:	DIMM
ECC:	Ja
Ohne ECC:	Ja
Unterstützte Arbeitsspeichergeschwindigkeit:	1600,1866,2133 MHz
Anzahl der M.2 (M)-Steckplätze:	1
PCI-Express x16 (Gen 3.x)-Anschlüsse:	1
ATX Stromstecker (24-pol.):	Ja
SATA III Anschlüsse:	6
Anzahl USB 2.0 Schnittstellen:	2
BIOS-Speichergröße:	128 Mbit
BIOS-Typ:	AMI
ACPI-Version:	5.0
Systemverwaltung BIOS (SMBIOS) Version:	2.8
LAN-Controller:	Intel I350-AM2, Realtek RTL8201N
Mitgelieferte Software:	Intel Node Manager\nIPMI 2.0\nKVM with dedicated LAN\nNMI\nSUM\nSuperDoctor 5
Speicherspannung:	1.2 V
Zahl der COM Stecker:	1
Echtzeituhr (RTC):	Ja
Maximaler RDIMM Speicher:	128 GB
Maximaler UDIMM Speicher:	64 GB
Ethernet/LAN:	Ja
Wachhund Funktion:	Ja
UEFI-Version:	2.4
TPM-Anschluss:	Ja