Supermicro MBD-X9SCL-O Bedienungsanleitung

Supermicro Hauptplatine MBD-X9SCL-O

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro MBD-X9SCL-O (106 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/106

USER’S MANUAL

Revision 1.0b

X9SCM

X9SCM-F

X9SCL

X9SCL-F

X9SCL+-F

Manual Revision 1.0b

Release Date: May 20, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

and makes no commitment to update or to keep current the information in this manual, or to notify

any person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

This manu al is writ t en f o r sy ste m i nteg rato rs, P C tech nic ians and

knowledgeable PC users. It provides information for the installation and use of the

X9SCM/X9SCM-F/X9SCL/X9SCL-F/X9SCL+-F motherboard.

About This Motherboard

The X9SCM/X9SCM-F/X9SCL/X9SCL-F/X9SCL+-F supports a single

Intel® Xeon E3-1200 series, 2nd generation Intel Core® i3, Pentium®, Celeron®

processor in an LGA 1155 socket. With the Intel® Cougar Point chipset built in,

the X9SCM/X9SCL series motherboard offers substantial enhancement in system

performance and storage capability for entry-level to mid-range servers in a sleek

package. Please refer to our website (http://www.supermicro.com/products/) for

processor and memory support updates. This product is intended to be installed

and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information about the Intel Cougar Point chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains BIOS Recovery instructions.

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	MBD-X9SCL-O
Breite:	244 mm
Tiefe:	244 mm
Mitgelieferte Kabel:	SATA, USB
Anzahl USB 2.0 Anschlüsse:	2
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Zertifizierung:	RoHS 6/6
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
RAID Level:	0, 1,5, 10
Anzahl VGA (D-Sub) Anschlüsse:	1
Motherboardformfaktor:	micro ATX
Motherboard Chipsatz:	Intel® C202
ECC:	Ja
Ohne ECC:	Nein
RAM-Speicher maximal:	32 GB
Anzahl PS/2 Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	9
Chassis Intrusion Stecker:	Ja
BIOS-Speichergröße:	32 Mbit
BIOS-Typ:	AMI
ACPI-Version:	2.0
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Mitgelieferte Software:	- IPMI 2.0\n- Super Doctor III\n- NMI
PCI-Express-Slots-Version:	2.0
Eingebaute Grafikadapter:	Ja
Speicherspannung:	1.5 V
PCI-Express x4-Slots:	1
PCI-Express x8-Slots:	2
Zahl der DIMM Slots:	4
Unterstützte UDIMM Taktraten:	800,1066,1333 MHz
Maximaler UDIMM Speicher:	32 GB
Unterstützte UDIMM Modulkapazität:	1GB, 2GB, 4GB, 8GB