Supermicro MBD-X8DTH-IF-B Bedienungsanleitung

Supermicro Hauptplatine MBD-X8DTH-IF-B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro MBD-X8DTH-IF-B (97 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/97

USER’S MANUAL

Revision 1.1c

X8DTH-6F

X8DTH-6

X8DTH-i

X8DTH-iF

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.1c

Release Date: Oct. 7, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTH-6/

X8DTH-6F/X8DTH-i/X8DTH-iF motherboard.

About this Motherboard

The X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF supports the Intel®

5500/5600 Series Processor, the ﬁ rst dual-processor platform that supports the

Intel QuickPath Interconnect (QPI) Technology, providing the next generation point-

to-point system interface to replace the current Front Side Bus. With the dual Intel

5520 chips built in, the X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF offers substantial

enhancement in system performance with increased bandwidth and unprecedented

scalability optimized for High Performance Computing (HPC)/Clustering systems

and intensive applications. Please refer to our website (http://www.supermicro.

com/products/) for updates on supported processors. This product is intended to

be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information

on running the CMOS Setup utility.

Appendix A . Appendix Blists BIOS POST Error Codes provides Software Instal-

lation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

iii

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	MBD-X8DTH-IF-B
Breite:	305 mm
Tiefe:	330 mm
Anzahl USB 2.0 Anschlüsse:	2
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	3
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
RAID Level:	0, 1,5, 10
Anzahl VGA (D-Sub) Anschlüsse:	1
Motherboardformfaktor:	Erweitertes ATX
Motherboard Chipsatz:	Intel® 5520
ECC:	Ja
Ohne ECC:	Ja
Unterstützte Arbeitsspeichergeschwindigkeit:	800,1066,1333 MHz
Anzahl PS/2 Anschlüsse:	2
Anzahl USB 2.0 Schnittstellen:	2
Zahl der Chassisventilatorstecker:	6
Chassis Intrusion Stecker:	Ja
BIOS-Speichergröße:	32 Mbit
BIOS-Typ:	AMI
ACPI-Version:	3.0
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Mitgelieferte Software:	IPMI v1.5 / 2.0, KVM\nSuper Doctor III
Anzahl serielle Anschlüsse:	1
PCI-Express-Slots-Version:	2.0
Eingebaute Grafikadapter:	Ja
Speicherspannung:	1.35, 1.5 V
PCI-Express x8-Slots:	7
Zahl der DIMM Slots:	12
Unterstützte RDIMM Taktraten:	800,1066,1333 MHz
Maximaler RDIMM Speicher:	192 GB
Unterstützte DIMM-Modulkapazitäten:	16GB, 1GB, 2GB, 4GB, 8GB
Unterstützte UDIMM Taktraten:	800,1066,1333 MHz
Maximaler UDIMM Speicher:	48 GB