Supermicro MBD-X7SPA-HF-B Bedienungsanleitung

Supermicro Hauptplatine MBD-X7SPA-HF-B

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro MBD-X7SPA-HF-B (93 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/93
X7SPA-L
USER’S MANUAL
Revision 1.0c
X7SPA-H
X7SPA-HF
Manual Revision 1.0c
Release Date: April 7, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.
Copyright © 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About This Manual
This ma nu al is writ ten f or syst em in te grat ors, PC tech nici an s and
knowledgeable PC users. It provides information for the installation and use of the
X7SPA-L/X7SPA-H/X7SPA-HF motherboard.
About This Motherboard
The X7SPA-L comes integrated with the single-core Intel® ATOM
TM D410 (1.66GHz,
11.6W) processor while the X7SPA-H/X7SPA-HF features the Intel ATOM D510
(Dual Core, 1.66GHz, 14.6W) processor. With memory support for up to 4 GB of
non-ECC, unbuffered 667 MHz DDR2 SO-DIMMs in 2 sockets, 6 SATA ports, on-
board VGA, and up to 10 USB 2.0 ports, the X7SPA-L/X7SPA-H/X7SPA-HF delivers
cost-effective performance in a small form factor.
This product is intended to be professionally installed and serviced by a techni-
cian.
Manual Organization
Chapter 1 describes the features, speciî‚żcations and performance of the mainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Driver Installation Instructions.
Preface
iii


Produktspezifikationen

Marke: Supermicro
Kategorie: Hauptplatine
Modell: MBD-X7SPA-HF-B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Supermicro MBD-X7SPA-HF-B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hauptplatine Supermicro

Bedienungsanleitung Hauptplatine

Neueste Bedienungsanleitung fĂĽr -Kategorien-