Supermicro H12DSU-iNR Bedienungsanleitung
Supermicro
Hauptplatine
H12DSU-iNR
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro H12DSU-iNR (135 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/135
USER’S MANUAL
Revision 1.0
H12DSU-iNR
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A or Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in industrial environment for Class A device or in residential
environment for Class B device. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See ”.www.dtsc.ca.gov/hazardouswaste/perchlorate
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signiîšżcant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: July 12, 2021
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2021 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
3
Preface
Preface
About This Manual
This manual is written for professional system integrators and technicians. It provides
information for the installation and use of the motherboard Installation and maintenance should
be performed by experienced technicians only.
Please refer to the H12DSU-iNR motherboard speciîšżcations page on our website for updates
on supported memory, processors and operating systems.
Notes
For your system to work properly, please follow the links below to download all necessary
drivers/utilities and this user’s manual.
• Supermicro product manuals: https://www.supermicro.com/support/manuals/
• Product drivers and utilities: https://www.supermicro.com/wdl/driver/AMD/SP3
• Product safety info: https://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
support@supermicro.com
This manual may be periodically updated without notice. Please check the Supermicro website
for possible updates to the manual revision level.
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
11
Chapter 1: Introduction
+
DESIGNED IN U SA
H12DSU-iN
REV:
USB0/1 (3.0)
IPMI_LAN
COM1
Notes:
• See Chapter 2 for detailed information on jumpers, I/O ports, and JF1 front panel
connections.
• Jumpers/LED indicators not indicated are used for testing only.
• Use only the correct type of onboard CMOS battery as specied by the manufacturer. Do
not install the onboard battery upside down to avoid possible explosion.
1.1 Quick Reference
VGA
UID_LED
P1_NVME0/1 SATA0-7 SATA8
BP PWR1-4
SATA9
FAN2
FAN1
CPU1
GPU PWR1
PSU2
FAN3FAN5FAN6
FAN7
FAN8
CPU2
FAN4
PSU1
JBT1
JF1
FP1
PWROK LED
P2-DIMME1~H2
P1-DIMMA1~D2
SXB2 SXB3A
JIPMB1
SXB1A
SP1
SXB1C
USB3/4 (3.0)
JTPM1
SXB3B
USB2 (3.0)
P2-DIMMA1~D2
GPU PWR2-3
P2_NVME2/3
SXB1B
P2_NVME0 SATA10-13
P2_NVME1 SATA14-17
P1-DIMME1~H2
JSD1
JSD2
JNCSI1
SXB3C
JUID_SW
BMC_HB LED
JWD1
P1_NVME2/3
BT1
JL1
JSEN1
Figure 1-2. H12DSU-iNR Motherboard Layout
24
H12DSU-iNR User's Manual
2. The spring-loaded Force Frame will raise up after the last screw securing it (#1) is
removed. Gently allow it to lift up to its stopping position.
3. Lift the Rail Frame up by gripping the lift tabs near the front end of the rail frame. While
keeping a secure grip of the Rail Frame, lift it to a position so you can do the next step
of removing the External Cap.
Note: The Rail Frame is spring loaded, so keep a secure grip on it as you lift it so it does
not snap up.
Rail Frame
PnP Cover Cap
31
Chapter 2: Installation
2.4 Memory Support and Installation
Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Memory Support
The H12DSU-iNR supports up to 8TB of ECC DDR4 3200 MHz speed, RDIMM/LRDIMM/3DS/
NVDIMM memory in thirty-two slots.
Processors and their Corresponding Memory Modules
CPU# Channel
1Channel
2Channel
3Channel
4Channel
5Channel
6Channel
7Channel
8
8 DIMMS
CPU1 A2 B2 C2 D2 E2 F2 G2 H2
16 DIMMS
CPU1 A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 G1 G2 H1 H2
16 DIMMS
CPU1 A2 B2 C2 D2 E2 F2 G2 H2
CPU2 A2 B2 C2 D2 E2 F2 G2 H2
32 DIMMS
CPU1 A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 G1 G2 H1 H2
CPU2 A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 G1 G2 H1 H2
Populating RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS DDR4 Memory Modules with
7002/7003 Processors
Type DIMM Population Maximum DIMM
Capacity (GB) Maximum Frequency (MHz)
DIMM1 DIMM2 1 Channel 8 Channel
RDIMM
1R 32GB 256GB 3200
1R 1R 64GB 512GB 2933
2R or 2DR 64GB 512GB 3200
1R 96GB 768GB 29332R or 2DR
2R or 2DR 2R or 2DR 128GB 1TB 2933
LRDIMM
dual die package
4DR 128GB 1TB 3200
4DR 4DR 256GB 2TB 2933
LRDIMM
3DS
2S2R 128GB 1TB 3200
2S4R 256GB 2TB 3200
2S2R 2S2R 256GB 2TB 2933
2S2R 2S4R 384GB 3TB 2933
2S4R 2S4R 512GB 4TB 2933
3DS RDIMM
2S2R 128GB 1TB 2933
2S2R 2S2R 256GB 2TB 2666
2S4R 256GB 2TB 2933
2S2R 2S4R 384GB 3TB 2666
2S4R 2S4R 512GB 4TB 2666
Produktspezifikationen
| Marke: | Supermicro |
| Kategorie: | Hauptplatine |
| Modell: | H12DSU-iNR |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Supermicro H12DSU-iNR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Supermicro
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Intel
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024