Supermicro C7X99-OCE-F Bedienungsanleitung

Supermicro Hauptplatine C7X99-OCE-F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Supermicro C7X99-OCE-F (147 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/147

C7X99-OCE

C7X99-OCE-F

USER’S MANUAL

Revision 1.1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes

no commitment to update or to keep current the information in this manual, or to notify any person

or organization of the updates. Please Note: For the most up-to-date version of this manual,

please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product de-

scribed in this manual at any time and without notice. This product, including software and documenta-

tion, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or

reproduction of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDEN-

TAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY

TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims

will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-

special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used

in this product may expose you to lead, a chemi-

cal known to the State of California to cause birth

defects and other reproductive harm.

Manual Revision 1.1

Release Date: September 21, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and

use of the C7X99-OCE/C7X99-OCE-F motherboard.

Manual Organization

Chapter 1 describes the features, specications and performance of

the motherboard, and provides detailed information on the Intel X99

Express chipset.

Chapter 2 provides hardware installation instructions. Read this chap-

ter when installing the processor, memory modules and other hardware

components into the system.

If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the

CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed

information on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Appendix D contains an introduction and instructions regarding the Dual

Boot Block feature of this motherboard.

Preface

Produktspezifikationen

Marke:	Supermicro
Kategorie:	Hauptplatine
Modell:	C7X99-OCE-F
Prozessorhersteller:	Intel
WLAN:	Nein
Breite:	305 mm
Tiefe:	244 mm
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Warentarifnummer (HS):	84733020
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ A:	8
Prozessorsockel:	LGA 2011 (Socket R)
Anzahl VGA (D-Sub) Anschlüsse:	1
Motherboardformfaktor:	ATX
Komponente für:	Server
Unterstützte Arbeitsspeicher:	DDR4-SDRAM
Ohne ECC:	Ja
Unterstützte Arbeitsspeichergeschwindigkeit:	3300 MHz
RAM-Speicher maximal:	64 GB
Unterstützte Speicherlaufwerk-Schnittstellen:	SATA III
PCI-Express x1 (Gen 2.x)-Anschlüsse:	2
Anzahl PS/2 Anschlüsse:	1
BIOS-Speichergröße:	128 Mbit
BIOS-Typ:	AMI
ACPI-Version:	4.0
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Nachhaltigkeitszertifikate:	RoHS
Trusted Platform Module (TPM):	Ja
Speicherspannung:	1.2 V
Anzahl unterstützter Prozessoren:	1
PCI-Express x4 (Gen 3.x)-Anschlüsse:	4
Zahl der DIMM Slots:	8
Trusted Platform Module (TPM) Version:	1.2
Unterstützte DIMM-Modulkapazitäten:	1GB, 2GB, 4GB, 8GB
Ethernet/LAN:	Ja