Sun Joe SPX-ESW4-RM Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe SPX-ESW4-RM (4 Seiten) in der Kategorie Hochdruckreiniger. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1-866-SNOWJOE (1-866-766-9563)
R
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
SPX-ESW4-RM ASSEMBLY QUICK GUIDE
SPX200/1000 Series
Trigger gun Transfer adapter Extension wand
rst piece
Locking
collar Adapter
Spray wand
Extension wand
rst piece Locking
collar
Trigger gun Middle wand
Most SPX3000 Series + Most SPX4000 Series
Most SPX2000 Series + SPX4003-ELT, SPX7001E
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT
Extension wand rst piece Locking
collar
Trigger gun
Extension wand rst piece Locking
collar
Trigger gun
Spray wand
Spray wand
Spray wand
1-866-SNOWJOE (1-866-766-9563)
R
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
SPX-ESW4-RM ASSEMBLY QUICK GUIDE
FOR USE WITH
SPX200/1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the rst piece of the extension wand and align the two tabs with the inside of the middle wand.
3. Once aligned, push in the extension wand into the middle wand, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
SPX2000, SPX2500, SPX2600
SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the rst piece of the extension wand and align the two tabs with the inside of the gun.
3. Once aligned, push in the extension wand into the trigger gun, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
MOST SPX3000 SERIES +
MOST SPX4000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the rst piece of the extension wand and align the two tabs with the inside of the transfer adapter.
4. Once aligned, push in the extension wand and twist counter clockwise to lock the wand into the trigger gun.
5. Use the locking collar to secure the wand in place. Move up and twist to lock.
FOR USE WITH
MOST SPX2000 SERIES +
SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the rst piece of the extension wand and align the two tabs with the inside of the gun.
3. Once aligned, push in the extension wand into the trigger gun, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.


Produktspezifikationen

Marke: Sun Joe
Kategorie: Hochdruckreiniger
Modell: SPX-ESW4-RM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sun Joe SPX-ESW4-RM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hochdruckreiniger Sun Joe

Bedienungsanleitung Hochdruckreiniger

Neueste Bedienungsanleitung für -Kategorien-