Sun Joe 24V-WSB-LTE Bedienungsanleitung

Sun Joe Staubsauger 24V-WSB-LTE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe 24V-WSB-LTE (16 Seiten) in der Kategorie Staubsauger. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

A Division of Snow Joe

® , LLC Model 24V-WSB-LTE Form No. SJ-24V-WSB-LTE-880E-M

OPERATOR’S MANUAL

CORDLESS WORKSHOP BLOWER + VACUUM

24-VOLT MAX* | 2.0 Ah | 180 MPH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person,

make sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not followed, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not followed, could result in minor or moderate injury.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

FOR HOUSEHOLD USE ONLY

mCAUTION! Wear appropriate hearing protection during

use. After long periods of extended use, the noise generated

from this appliance may cause hearing loss if your ears are

not properly protected.

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts.

3. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

4. Dress properly – Do not wear loose clothing or jewelry

as such articles can get caught in moving parts. Wear a

protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

5. Prevent unintentional starting – Ensure the switch is in

the o-position before connecting to battery pack, picking

up or carrying the appliance. Carrying the appliance with

your nger on the switch or energizing an appliance that

has the switch on invites accidents.

6. Disconnect battery pack before cleaning or servicing –

Disconnect the battery pack from the appliance before

making any adjustments, changing accessories,

or storing. Such preventive safety measures reduce the

risk of starting the appliance accidentally.

mWARNING! Do not modify or attempt to repair the

appliance or the battery pack (as applicable) except as

indicated in the instructions for use and care.

7. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

8. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it is designed.

9. Wear personal protective equipment – When using this

tool, wear safety glasses with side shields or goggles to

provide necessary eye protection. Wear ear defenders to

prevent hearing damage. Use a face or dust mask if the

work environment is dusty.

10. Remove the battery – Remove the battery when the

tool is not in use, before servicing it, when changing

accessories, and when performing any other maintenance

task.

11. Store idle tool indoors – When not in use, the workshop

blower + vacuum should be stored indoors in a dry and

high or locked-up place out of the reach of children.

12. Use the right tool – Do not use the tool for any job except

that for which it is intended.

13. Avoid dangerous environments – Do not use the

workshop blower + vacuum in rain, damp, or wet

locations.

14. Stay alert – Watch what you are doing. Use common

sense. Do not operate the workshop blower + vacuum

when you are tired or under the inuence of drugs,

alcohol, or other medication.

Additional Safety Instructions

• Do not use the workshop blower + vacuum in the rain or in

a damp area.

• Use extra care when cleaning on stairs or steps.

• Keep rm footing and maintain good balance at all times.

Do not overreach. Overreaching can result in loss of

balance.

• Turn o all controls before unplugging the tool.

• Do not use the tool if the power switch does not turn it ON

or OFF. Any tool that cannot be controlled with the switch is

dangerous and must be repaired.

• Carefully inspect your appliance prior to use and follow all

label and marking instructions.

• Keep all parts of your body away from any moving parts

and all hot surfaces of the unit.

• Do not put any object into the tool's openings. Do not use

the tool with any opening blocked; keep openings free of

dust, lint, hair, or any other object that may reduce air ow.

• Check the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string, which can

be thrown or become entangled in the machine.

• Service on the product must be performed by qualied

repair personnel only. Service or maintenance performed

by unqualied personnel could result in injury to the user or

damage to the product.

• This workshop blower + vacuum is intended for residential

use only. Commercial use of this product is prohibited and

will void the manufacturer's warranty.

• Never run the unit without the proper equipment attached.

Always ensure the workshop blower + vacuum tube is

properly installed.

• Always grasp the handle when operating the unit,

only operate the machine in its intended orientation.

•

Do not use to pick up ammable or combustible liquids,

such as gasoline, or use in areas where they may be present.

• Do not pick up anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.

• Do not use without dust bag in place.

Specic Safety Rules For

Workshop Blower + Vacuum

• The workshop blower + vacuum has been designed to clear

light debris and leaves from hard surfaces – not for clearing

grassed areas.

• When operating the unit, never point the workshop Blower

+ vacuum tube in the direction of people or pets or in the

direction of windows. Use extra caution when blowing

debris near solid objects, such as trees, automobiles,

and walls.

• Be sure to secure the unit when transporting it.

• Never douse or squirt the unit with water or any other liquid.

Clean the unit after each use as described in the cleaning

and storage section.

Battery & Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the workshop blower + vacuum

and cause it to malfunction.

mCAUTION! To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery pack only in its designated

iON+ 24V lithium-ion charger. Other types of chargers present

risk of re, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

The safe temperature range for the battery is NOTE:

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery

outside in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger,

pull the plug, not the cord, from the receptacle to reduce

the risk of damage to the electrical plug and cord.

Never carry the charger by its cord or yank it by the cord

to disconnect it from the receptacle. Keep the cord away

from heat, oil and sharp edges. Make sure the cord will not

be stepped on, tripped over or subjected to damage or

stress when the charger is in use. Do not use the charger

with a damaged cord or plug. Replace a damaged charger

immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Charger 24VCHRG-QC is rated for 120 volt AC only – The

charger must be plugged into an appropriate receptacle.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to remove

battery packs from unplugged chargers.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery packs – Battery packs

may explode, causing personal injury or damage.

Toxic fumes and materials are created when battery packs

are burned.

• Do not crush, drop or damage battery packs – Do not

use the battery pack or charger if they have sustained a

sharp blow, been dropped, run over or have been damaged

in any way (i.e. pierced with a nail, hit with a hammer,

stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

please contact an authorized Snow Joe® + Sun Joe® dealer

or call the Snow Joe® + Sun Joe® customer service center

at 1-866-SNOWJOE (1-866-766-9563).

• Never let a Battery chemicals cause serious burns –

damaged battery pack contact the skin, eyes or mouth.

If a damaged battery pack leaks battery chemicals, use

rubber or neoprene gloves to safely dispose of it. If skin

is exposed to battery uids, wash the aected area with

soap and water and rinse with vinegar. If eyes are exposed

to battery chemicals, immediately ush with water for 20

minutes and seek medical attention. Remove and dispose

of contaminated clothing.

• Store your battery pack and charger in a cool, dry

place – Do not store the battery pack or charger where

temperatures may exceed 105ºF (40.5ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

mWARNING! Read all safety warnings and instructions

Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury

Information about the battery

1. The battery pack supplied with your cordless workshop

blower + vacuum is only partially charged. The battery

pack has to be charged completely before you use the

tool for the rst time.

2. For optimum battery performance, avoid low discharge

cycles by charging the battery pack frequently.

3. Store the battery pack in a cool place, ideally at 77°F

(25°C) and charged to at least 40%.

4. Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when its capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your workshop blower

+ vacuum, and therefore pose a safety risk.

5. Do not throw battery packs into an open re as this poses

a risk of explosion.

6. Do not ignite the battery pack or expose it to re.

7. Do not exhaustively discharge batteries. Exhaustive

discharge will damage the battery cells. The most

common cause of exhaustive discharge is lengthy storage

or non-use of partially discharged batteries. Stop working

as soon as the performance of the battery falls noticeably

or the electronic protection system triggers. Place the

battery pack in storage only after it has been fully charged.

8. Protect batteries and the tool from overloads. Overloads

will quickly result in overheating and cell damage inside

the battery housing even if this overheating is not apparent

externally.

9. Avoid damage and shocks. Immediately replace batteries

that have been dropped from a height of more than one

meter or those that have been exposed to violent shocks,

even if the housing of the battery pack appears to be

undamaged. The battery cells inside the battery may have

suered serious damage. In such instances, please read

the waste disposal information for proper battery disposal.

10. If the battery pack suers overloading and overheating,

the integrated protective cuto will switch o the

equipment for safety reasons.

IMPORTANT! Do not press the ON/OFF switch any more

if the protective cut-o has been activated. This may

damage the battery pack.

11. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

12. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

13. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns. (This advice is considered correct

for conventional NiMh, NiCd, lead acid and lithium-ion

cell types. If this advice is incorrect for a cell design

that diers from these, then the correct advice may be

substituted.)

14. Do not use a battery pack or appliance that is damaged

or modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

15. Do not expose a battery pack or appliance to re or

excessive temperature. Exposure to re or temperature

above 266ºF (130°C) may cause explosion.

Produktspezifikationen

Marke:	Sun Joe
Kategorie:	Staubsauger
Modell:	24V-WSB-LTE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sun Joe 24V-WSB-LTE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Staubsauger Sun Joe

Sun Joe SWD2500 Bedienungsanleitung

11 Oktober 2024

Sun Joe 24V-X2-OGV-CT-RM Bedienungsanleitung

5 August 2024

Sun Joe IONBV-XR-RM Bedienungsanleitung

3 August 2024

Sun Joe SWD4000-RM Bedienungsanleitung

31 Juli 2024

Sun Joe SBJ803E-RM Bedienungsanleitung

29 Juli 2024

Sun Joe ATJ-V501 Bedienungsanleitung

29 Juli 2024

Sun Joe SBJ801E-RM Bedienungsanleitung

26 Juli 2024

Sun Joe SWD2500-RM Bedienungsanleitung

25 Juli 2024

Sun Joe SBJ802E-RED-RM Bedienungsanleitung

24 Juli 2024

Sun Joe 24V-X2-OGV-CT Bedienungsanleitung

24 Juli 2024

Bedienungsanleitung Staubsauger

Neueste Bedienungsanleitung für -Kategorien-

Hoover HC-420-HKA Bedienungsanleitung

16 Oktober 2024

LG V-C5764HEU Bedienungsanleitung

16 Oktober 2024

LG VC5016GHTY Bedienungsanleitung

15 Oktober 2024

AEG VX9-4-6PT Bedienungsanleitung

15 Oktober 2024

Zanussi ZAN3010EL Bedienungsanleitung

15 Oktober 2024

Coline VCB46A15F-70 Bedienungsanleitung

15 Oktober 2024

Miele S 183 Bedienungsanleitung

15 Oktober 2024

LG VC33205NHTB Bedienungsanleitung

15 Oktober 2024

Meec Tools 009-639 Bedienungsanleitung

15 Oktober 2024

Melissa 16420214 Bedienungsanleitung

15 Oktober 2024