Sun Joe 24V-PHT17-CT Bedienungsanleitung
Sun Joe
Heckenschere
24V-PHT17-CT
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe 24V-PHT17-CT (20 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
© 2020 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-PHT17-CT Form No. SJ-24V-PHT17-CT-880E-M
R
CORDLESS POLE HEDGE TRIMMER
– TOOL ONLY
24 VOLT MAX* | MULTI-ANGLE | 17-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of î›…ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inî›…uence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Always wear Use safety equipment.
eye protection – Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
3. Avoid accidental starting. Ensure the switch is in the
o-position before plugging in – Carrying power tools
with your nger on the switch or plugging in power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on – A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used – Use of dust collection
can reduce dust-related hazards.
2
Power Tool Use + Care
1. Do not force the power tool. Use the correct power
tool for your application – The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not turn
it on and o – Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3. Disconnect the battery pack from the power
tool before making any adjustments, changing
accessories, or storing power tools – Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool – Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may aect the power tool’s
operation. If damaged, have the power tool repaired
before use – Many accidents are caused by poorly
maintained power tools.
6. Keep cutting tools sharp and clean – Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work
to be performed – Use of the power tool for operations
dierent from those intended could result in a hazardous
situation.
Service
Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Additional Safety Rules for Pole
Hedge Trimmer
1. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
2. Hold the pole hedge trimmer by insulated gripping
surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a "live" wire may
electrify exposed metal parts of the power tool and could
give the operator an electric shock.
3. Maintain a rm grip on both handle and pole while cutting
with the blade. Keep the blade away from body.
4. Hold pole hedge trimmer properly, e.g., with both hands.
Loss of control can cause personal injury.
5. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
6. Service on the product must be performed by qualied
repair personnel only. Service or maintenance performed
by unqualied personnel could result in injury to the user
or damage to the product.
7. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o and
the battery is removed when clearing jammed material.
A moment of inattention while operating the pole hedge
trimmer may result in serious personal injury.
8. Carry the pole hedge trimmer by the handle with the
cutting blade stopped. When transporting or storing
the pole hedge trimmer always keep the blade covered.
Proper handling of the pole hedge trimmer will reduce
possible personal injury from the cutter blades.
9. Do not use the pole hedge trimmer if the switch does not
turn it on and o. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
10. Use the pole hedge trimmer and accessories in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations dierent from
intended use could lead to a hazardous situation.
11. Do not overreach and keep the balance at all times.
Always be sure of the footing on slopes. Walk when
operating the power tool, never run.
12. Do not touch moving hazardous parts before the battery
pack is removed and the moving hazardous parts have
come to a complete stop.
13. Always wear eye and ear protection. Wear protective mask
if necessary. Dress properly, do not wear loose clothing
or jewelry that could become caught in moving parts of
the unit. Safe, sturdy, nonskid footwear should always be
worn. Long hair should be tied back.
14. Do not use the machine in bad weather conditions
especially when there is a risk of lightning.
15. Inspect the area to be cut and remove any foreign objects
that will inî›…uence your cutting. If the foreign objects
can not be removed, e.g. wire fences, please mark and
remember it to avoid touching them during cutting.
mDANGER! Keep hands away from blade. Contact with
blade will result in serious personal injury.
Training
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the product.
2. Never allow people unfamiliar with these instructions or
children to use the product. Local regulations can restrict
the age of the operator.
3. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
3
Preparation
1. This product can cause serious injuries. Read the
instructions carefully for the correct handling, preparation,
maintenance, starting and stopping of the product.
Become familiar with all controls and the proper use of the
product.
2. Never allow children to use the pole hedge trimmer.
3. Beware of overhead power lines.
4. Never operate the product while people, especially
children, or pets are nearby.
5. Dress properly. Do not wear loose clothing or jewelry,
which can be caught in moving parts. Use of sturdy
gloves, non-skid footwear and safety glasses is
recommended.
6. Wear eye protection and stout shoes at all times while
operating the product.
7. If the cutting attachment strikes any foreign object or the
product starts making any unusual noise or vibration,
switch the product o, allow the product to stop, remove
the battery, and take the following steps:
– inspect for damage;
– check for, and tighten, any loose parts;
– have any damaged parts replaced or repaired with parts
having equivalent specications.
Operation
1. Use the product only in daylight or good articial light.
2. Keep hands and feet away from the cutting device at all
times and especially when switching on the motor.
3. Before using the product and after any impact, check for
signs of wear or damage and repair as necessary.
4. Always remove the battery
– whenever leaving the product unattended;
– adjusting the working position of the cutting device;
– before clearing a blockage;
– before checking, cleaning or working on the product;
– after striking a foreign object;
– whenever the product starts vibrating abnormally.
5. Ensure that the pole hedge trimmer is correctly located in
a designated working position before starting the motor.
6. While operating the pole hedge trimmer, always ensure
that the operating position is safe and secure, especially
when using steps or a ladder.
7. Do not operate the pole hedge trimmer with a damaged or
excessively worn cutting device.
8. Always ensure that all handles and guards are tted when
using the pole hedge trimmer. Never attempt to use an
incomplete pole hedge trimmer or one tted with an
unauthorized modication.
9. Always use two hands to operate a pole hedge trimmer.
10. Always be aware of your surroundings and stays alert for
possible hazards of which you may not be aware due to
the noise of the product.
11. Take care against injury to feet and hands from the cutting
device.
12. Always ensure that the air vents are kept clear of debris.
13. Wear slip-resistant foot protection and protective clothing
when using this product.
14. Always keep proper footing and operate the product
only when standing on a xed, secure and level surface.
Change working positions regularly to avoid tiredness and
ensure a comfortable working position at all times.
15. Never use replacement parts or accessories not provided
or recommended by the manufacturer.
16. The use of this product may be restricted by regional or
local regulations.
Vibration + Noise Reduction
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration
and noise exposure risks.
1. Only use the product as intended by its design and these
instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct attachments for the product and ensure they
are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration tool
use across a longer period of time.
Emergency
Familiarize yourself with the use of this product by means of
this instruction manual. Memorize the safety directions and
follow them to the letter. This will help to prevent risks and
hazards.
1. Always be alert when using this product, so that you can
recognize and handle risks early. Fast intervention can
prevent serious injury and damage to property.
2. Switch o and remove the battery if there are
malfunctions. Have the product checked by a qualied
professional and repaired, if necessary, before you
operate it again.
Residual Risks
Even if you are operating this product in accordance with all
the safety requirements, potential risks of injury and damage
remain. The following dangers can arise in connection with the
structure and design of this product:
Produktspezifikationen
| Marke: | Sun Joe |
| Kategorie: | Heckenschere |
| Modell: | 24V-PHT17-CT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sun Joe 24V-PHT17-CT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heckenschere Sun Joe
9 September 2024
14 August 2024
12 August 2024
10 August 2024
6 August 2024
4 August 2024
4 August 2024
1 August 2024
31 Juli 2024
29 Juli 2024
Bedienungsanleitung Heckenschere
- Heckenschere Hanseatic
- Heckenschere Cotech
- Heckenschere Makita
- Heckenschere Bosch
- Heckenschere Parkside
- Heckenschere Vonroc
- Heckenschere Black And Decker
- Heckenschere Cocraft
- Heckenschere FERM
- Heckenschere Ryobi
- Heckenschere Skil
- Heckenschere Topcraft
- Heckenschere Trotec
- Heckenschere DeWalt
- Heckenschere Einhell
- Heckenschere Worx
- Heckenschere Hikoki
- Heckenschere Hitachi
- Heckenschere Hyundai
- Heckenschere Fuxtec
- Heckenschere Kress
- Heckenschere Metabo
- Heckenschere Kärcher
- Heckenschere Atika
- Heckenschere Güde
- Heckenschere Scheppach
- Heckenschere Levita
- Heckenschere Meec Tools
- Heckenschere Fieldmann
- Heckenschere Remington
- Heckenschere Husqvarna
- Heckenschere Stihl
- Heckenschere Dedra
- Heckenschere Pattfield
- Heckenschere Honda
- Heckenschere Cramer
- Heckenschere Florabest
- Heckenschere Grouw
- Heckenschere Hecht
- Heckenschere Stiga
- Heckenschere Greenworks
- Heckenschere Robust
- Heckenschere Zipper
- Heckenschere Baumr-AG
- Heckenschere Brandson
- Heckenschere Batavia
- Heckenschere Dolmar
- Heckenschere Bavaria
- Heckenschere Milwaukee
- Heckenschere AL-KO
- Heckenschere EGO
- Heckenschere Gardena
- Heckenschere CMI
- Heckenschere Powerpeak
- Heckenschere Verto
- Heckenschere Wolf Garten
- Heckenschere Craftsman
- Heckenschere Defort
- Heckenschere Powerplus
- Heckenschere Kingcraft
- Heckenschere Echo
- Heckenschere Toledo
- Heckenschere Martha Stewart
- Heckenschere McCulloch
- Heckenschere Ozito
- Heckenschere Solo
- Heckenschere Texas
- Heckenschere VARO
- Heckenschere Spear & Jackson
- Heckenschere Efco
- Heckenschere Eurogarden
- Heckenschere Ferrex
- Heckenschere Flymo
- Heckenschere Gamma
- Heckenschere Garden Feelings
- Heckenschere Garden Groom
- Heckenschere Gardenline
- Heckenschere Gartenmeister
- Heckenschere Grizzly
- Heckenschere Hoberg
- Heckenschere Homelite
- Heckenschere HURRICANE
- Heckenschere Kaaz
- Heckenschere Kibani
- Heckenschere Lux Tools
- Heckenschere Mac Allister
- Heckenschere McGregor
- Heckenschere Mr Gardener
- Heckenschere Qualcast
- Heckenschere Shindaiwa
- Heckenschere Sterwins
- Heckenschere Tanaka
- Heckenschere Tel Sell
- Heckenschere Yardforce
- Heckenschere Powerworks
- Heckenschere Sovereign
- Heckenschere Challenge
- Heckenschere RIDA
- Heckenschere Gtech
- Heckenschere Palmera
- Heckenschere MacAllister
- Heckenschere Deltafox
- Heckenschere Jonsered
- Heckenschere G-Technology
- Heckenschere Gute Wahl
- Heckenschere Budget
- Heckenschere Anova
- Heckenschere Yellow Garden Line
- Heckenschere LawnMaster
- Heckenschere Ergotools Pattfield
- Heckenschere Bestgreen
- Heckenschere Maruyama
- Heckenschere Black Decker
- Heckenschere Maxbear
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
11 Oktober 2024
8 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
1 Oktober 2024
30 September 2024
30 September 2024
29 September 2024