Stihl MS 360 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Stihl MS 360 (126 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 82 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/126
Instruction Manual
Manual de instrucciones
STIH)
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede causar
lesiones graves o mortales.
Warning!
To reduce the risk of kickback injury use
STIHL reduced kickback bar and STIHL RM 2
(0.325") or RM 2 ( 3/8") chain depending on
sprocket or other available low kickback
components.
Advertencia!
Para reducir el riesgo de lesionarse como
resultado de un culatazo, utilice la barra
de contragolpe reducido y la cadena RM 2
(0.325 pulg) o RM 2 ( 3/8 pulg) de STIHL,
dependiendo de la rueda dentada usada y de
otros componentes reductores de
contragolpe.
STIHL MS 360
1MS 360
english
Printing inks contain vegetable oils;
paper can be recycled.
Printed on chlorine-free paper.© 2002 Andreas Stihl AG & Co., Waiblingen
0458 174 3021. M5,2. B2. PM. Printed in USA
STIHl
Contents
Guide to Using this Manual .............. 2
Important Safety Precautions
for Chain Saw Users ........................ 3
Safety Precautions ........................... 5
Mounting the Bar and Chain ........... 26
Tensioning the Saw Chain .............. 28
Checking Chain Tension ................. 28
Fuel ................................................ 28
Fueling ............................................ 29
Chain Lubricant .............................. 31
Filling Chain Oil Tank ...................... 31
Checking Chain Lubrication ........... 32
Chain Brake .................................... 32
Winter Operation ............................ 33
Electric Handle Heating* ................ 35
Information Before You Start .......... 35
Starting / Stopping the Engine ........ 36
Operating Instructions .................... 39
Oil Quantity Control ........................ 40
Taking Care of Guide Bar ............... 41
Air Filter System ............................. 41
Cleaning the Air Filter ..................... 42
Motor Management ........................ 43
Adjusting the Carburetor ................ 43
Spark Arresting Screen*
in Muffler ......................................... 45
Checking the Spark Plug ................ 45
Replacing Starter Rope
and Rewind Spring ......................... 46
Storing the Machine ........................ 48
Checking and Replacing
Chain Sprocket ............................... 49
Maintaining and Sharpening
Saw Chain ...................................... 50
Maintenance Chart ......................... 54
Parts and Controls .......................... 56
Specifications ................................. 58
Special Accessories ....................... 59
Ordering Spare Parts ..................... 59
Maintenance and Repairs .............. 59
STIHL Incorporated
Federal Emission
Control Warranty Statement ........... 60
* see "Guide to Using this Manual"
Allow only persons who understand this
Manual to operate your chainsaw.
To receive maximum performance and
satisfaction from your STIHL chainsaw,
it is important that you read and
understand
the maintenance and safety
precautions,
starting on page 3, before
using your chainsaw.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!Warning!
Because a chainsaw is a high-speed
wood-cutting tool, some special safety
precautions must be observed as with
any other power saw to reduce the risk
of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time-to-time. If the
operating characteristics or the
appearance of your chainsaw differs
from those described in this Manual,
please contact your STIHL dealer for
informations and assistance.
2
english
MS 360
Pictograms
All the pictograms attached to the
machine are shown and explained in the
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:Step or procedure without direct
reference to an illustration.
Description of step or procedure that
refers directly to the illustration and
contains item numbers that appear in
the illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Warning where there is a risk of
damaging the power tool or
individual components.
Note or hint which is not essential
for using the power tool, but may
improve the operator’s under-
standing of the situation and result
in better use of the power tool.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual refers to
several models with different
features. Components that are not
installed in all models and related
applications are marked thus
*.
Such components are available as
special accessories from your
STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Guide to Using this Manual
Produktspezifikationen
| Marke: | Stihl |
| Kategorie: | Säge |
| Modell: | MS 360 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Stihl MS 360 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Säge Stihl
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
Bedienungsanleitung Säge
- Säge Panasonic
- Säge Cotech
- Säge Makita
- Säge Bosch
- Säge Parkside
- Säge Vonroc
- Säge AEG
- Säge Powerfix
- Säge Black And Decker
- Säge Cocraft
- Säge FERM
- Säge Ryobi
- Säge Skil
- Säge Trotec
- Säge Hilti
- Säge DeWalt
- Säge Einhell
- Säge Elu
- Säge Festool
- Säge Mafell
- Säge Worx
- Säge Hikoki
- Säge Hitachi
- Säge Kress
- Säge Metabo
- Säge Atika
- Säge Güde
- Säge Power Craft
- Säge Scheppach
- Säge Workzone
- Säge Meec Tools
- Säge Dremel
- Säge Fieldmann
- Säge Westfalia
- Säge Remington
- Säge Husqvarna
- Säge Dedra
- Säge Silverline
- Säge Sthor
- Säge Florabest
- Säge Hecht
- Säge Herkules
- Säge Stiga
- Säge Ford
- Säge Zipper
- Säge Yato
- Säge Greencut
- Säge Genesis
- Säge Dolmar
- Säge Bavaria
- Säge Milwaukee
- Säge Narex
- Säge Toolcraft
- Säge Craftsman
- Säge Powerplus
- Säge McCulloch
- Säge Ozito
- Säge Yard Force
- Säge Sun Joe
- Säge Solo
- Säge Texas
- Säge Porter-Cable
- Säge Guede
- Säge Felisatti
- Säge Qualcast
- Säge Tanaka
- Säge Troy-Bilt
- Säge Sovereign
- Säge MacAllister
- Säge Selion
- Säge Proviel
- Säge Merox
- Säge Bullcraft
- Säge XU1
- Säge Urrea
- Säge EFA
- Säge MyTool
- Säge Ergotools Pattfield
Neueste Bedienungsanleitung für -Kategorien-
14 August 2024
7 August 2024
18 April 2024
17 April 2024
16 April 2024
16 April 2024
15 April 2024
14 April 2024
13 April 2024
13 April 2024