Stihl 036 QS Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Stihl 036 QS (55 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 64 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/55
$.LFNEDFN6DIHW\3UHFDXWLRQV
:DUQLQJ
Kickback may occur when the nose
or tip of the guide bar touches an
object, or when the wood closes in
and pinches the saw chain in the
cut. Tip contact in some cases may
cause a lightning fast reverse
reaction, kicking the guide bar up
and back towards the operator.
Pinching the saw chain along the
top of the guide bar may push the
guide bar rapidly back towards the
operator. Either of these reactions
may cause you to lose control of the
saw which could result in serious
personal injury.
Section 5.12 of ANSI B 175.1-1991
sets certain performance and
design criteria related to chainsaw
kickback. STIHL has developed a
color code system using green and
yellow to help you select a power-
head, bar and chain combination
that complies with the kickback
requirements of the ANSI Standard.
See the sections entitled "Safety
Precautions" and "Specifications"
of this manual.
Do not rely exclusively upon the
safety devices built into your saw.
As a chainsaw user, you should
take several steps to keep your
cutting jobs free from accident or
injury.
1. With a basic understanding of
kickback, you can reduce or eli-
minate the element of surprise.
Sudden surprise contributes to
accidents.
2. Keep a good firm grip on the
saw with both hands, the right
hand on the rear handle,
and the left hand on the front
handle, when the engine is run-
ning. Use a firm grip with
thumbs and fingers encircling
the chainsaw handles.
A firm grip will help you reduce
kickback and maintain control
of the saw.
Don’t let go.
3. Make sure the area in which you
are cutting is free from obstruc-
tions. Do not let the nose of the
guide bar contact a log, branch,
or any other obstruction while
you are operating the saw.
4. Cut at high engine speeds.
5. Do not overreach or cut above
shoulder height.
6. Follow manufacturer’s
sharpening and maintenance
instructions for the saw chain.
7. Only use replacement bars and
chains specified by the manu-
facturer or the equivalent.
8. Reduced kickback bars and low
kickback chains are designed
to reduce the risk of kickback
injury. Ask your STIHL dealer
about these devices.
%2WKHU6DIHW\3UHFDXWLRQV
1. Do QRW operate a chainsaw with
one hand! Serious injury to the
operator, helpers, bystanders,
or any combination of these
persons may result from one-
handed operation. A chainsaw
is intended to be used with two
hands.
2. Do not operate a chainsaw when
you are fatigued.
3. Use safety footwear; snug-fitting
clothing; protective gloves; and
eye, hearing, and head protect-
ion devices.
,PSRUWDQW6DIHW\3UHFDXWLRQVIRU&KDLQ6DZ8VHUV
4. Use caution when handling fuel.
Move the chainsaw at least
10 feet (3 m) from the fueling
point before starting the engine.
5. Do not allow other persons to
be near the chainsaw when
starting or cutting with the
chainsaw. Keep bystanders
and animals out of the work
area.
6. Do not start cutting until you
have a clear work area, secure
footing, and a planned retreat
path from the falling tree.
7. Keep all parts of your body
away from the saw chain when
the engine is running.
8. Before you start the engine,
make sure that the saw chain
is not contacting anything.
9. Carry the chainsaw with the
engine stopped, the guide bar
and saw chain to the rear, and
the muffler away from your
body.
10. Do not operate a chainsaw that
is damaged, improperly
adjusted, or not completely and
securely assembled. Be sure
that the saw chain stops
moving when the throttle trigger
is released.
11. Shut off the engine before
setting the chainsaw down.
12. Use extreme caution when
cutting small size brush and
saplings because slender mate-
rial may catch the saw chain
and be whipped toward you or
pull you off balance.
13. When cutting a limb that is
under tension be alert for
springback so that you will not
be struck when the tension in
the wood fibers is released.
14. Keep the handles dry, clean,
and free of oil or fuel mixture.
15. Operate the chainsaw only in
well-ventilated areas.
16. Do not operate a chainsaw in a
tree unless you have been
specifically trained to do so.
17. All chainsaw service, other than
the items listed in the Owner’s
Manual maintenance instruc-
tions, should be performed by
competent chainsaw service
personnel.
(For example, if improper tools
are used to remove the
flywheel or if an improper tool
is used to hold the flywheel in
order to remove the clutch,
structural damage to the
flywheel could occur and could
be subsequently cause the
flywheel to burst).
18. When transporting your chain-
saw, use the appropriate chain
guard (scabbard).
Other important safety precautions
are contained in the body of the
Owner’s Manual.
1RWH
When using a chainsaw for logging
purposes, refer to the Code of
Federal Regulations, Parts 1910
and 1928.
Continuation of Important Safety Precautions
Produktspezifikationen
| Marke: | Stihl |
| Kategorie: | Säge |
| Modell: | 036 QS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Stihl 036 QS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Säge Stihl
18 April 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
9 März 2024
Bedienungsanleitung Säge
- Säge Panasonic
- Säge Cotech
- Säge Makita
- Säge Bosch
- Säge Parkside
- Säge Vonroc
- Säge AEG
- Säge Powerfix
- Säge Black And Decker
- Säge Cocraft
- Säge FERM
- Säge Ryobi
- Säge Skil
- Säge Trotec
- Säge Hilti
- Säge Bort
- Säge DeWalt
- Säge Einhell
- Säge Elu
- Säge Festool
- Säge Mafell
- Säge Triton
- Säge Worx
- Säge Tacklife
- Säge Hikoki
- Säge Hitachi
- Säge Hyundai
- Säge Hazet
- Säge Kress
- Säge Metabo
- Säge Stanley
- Säge Kärcher
- Säge Atika
- Säge Güde
- Säge Power Craft
- Säge Scheppach
- Säge Bébé Confort
- Säge Workzone
- Säge Meec Tools
- Säge Dremel
- Säge Fieldmann
- Säge King Craft
- Säge Proxxon
- Säge Westfalia
- Säge Remington
- Säge Husqvarna
- Säge Chicago Pneumatic
- Säge Dedra
- Säge Graphite
- Säge Snow Joe
- Säge Silverline
- Säge Holzmann
- Säge Sthor
- Säge Florabest
- Säge Hecht
- Säge Herkules
- Säge Stiga
- Säge Ford
- Säge Zipper
- Säge Yato
- Säge Baumr-AG
- Säge Greencut
- Säge Genesis
- Säge Evolution
- Säge Dolmar
- Säge Bavaria
- Säge Milwaukee
- Säge Narex
- Säge Toolcraft
- Säge Fein
- Säge AL-KO
- Säge Gardena
- Säge Craftsman
- Säge Defort
- Säge Powerplus
- Säge Alpha Tools
- Säge Martha Stewart
- Säge McCulloch
- Säge Ozito
- Säge Yard Force
- Säge Sun Joe
- Säge Draper
- Säge Solo
- Säge Texas
- Säge Ridgid
- Säge Porter-Cable
- Säge Hobart
- Säge Guede
- Säge Dexter Power
- Säge Felisatti
- Säge Gardenline
- Säge Grizzly
- Säge Homelite
- Säge HURRICANE
- Säge Plantiflor
- Säge Qualcast
- Säge Shindaiwa
- Säge Sterwins
- Säge Tanaka
- Säge Troy-Bilt
- Säge Meister Craft
- Säge Sovereign
- Säge Challenge
- Säge Challenge Xtreme
- Säge Truper
- Säge MacAllister
- Säge RIKON
- Säge Pro-Cut
- Säge Selion
- Säge Kreg
- Säge Proviel
- Säge Merox
- Säge Bullcraft
- Säge XU1
- Säge MTM
- Säge Urrea
- Säge EFA
- Säge MyTool
- Säge Ergotools Pattfield
- Säge IKRA
- Säge FIXIT
- Säge Bavaria By Einhell
- Säge Rona
- Säge Donau Elektronik
Neueste Bedienungsanleitung für -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024