StarTech.com USB32DP24K60 Bedienungsanleitung

StarTech.com Netzwerkkarte/Adapter USB32DP24K60

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com USB32DP24K60 (2 Seiten) in der Kategorie Netzwerkkarte/Adapter. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 11/17/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/USB32DP24K60

Package contents

Requirements

• Two DisplayPort monitors with cabling

• A computer system with:

• An available USB 3.0 port

• Windows® 10, 8.1, 8 or 7

• macOS High Sierra (10.13), Sierra (10.12), El Capitan (10.11),

Yosemite (10.10)

Operating system requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/USB32DP24K60.

USB32DP24K60

USB 3.0 to Dual DisplayPort Adapter - 4K 60Hz

*actual product may vary from photos

1 x USB video adapter

1 x quick-start guide

Product overview

Integrated USB 3.0

input cable

DisplayPort

output port #1

Notes:

• You may need to restart your computer during the software

installation process. Be sure to save any unsaved material before

you install the software.

• If you’re running Windows 7, macOS 10.10 or macOS 10.1, ensure

the USB video adapter is not connected to your computer until

after driver installation.

1. If you’re running Windows 7, macOS 10.10 or macOS 10.11,

download the latest software from the StarTech.com website:

http://www.StarTech.com/USB32DP24K60

Note: If you’re running Windows 8 (or later), or macOS 10.12

(or later) proceed to step 5.

2. The software will be compressed in a .zip folder. Extract the

contents of the folder to a location on your computer that’s easy

to access, such as your or Desktop Downloads folder.

3. Open the folder that corresponds with your operating system.

If you’re running Windows, launch the (exe) le. If you’re Setup

running macOS, launch the (dmg) le.DisplayLink Installer

4. Follow the on-screen prompts to complete the installation, and if

instructed to do so, restart your computer.

5. Connect a DisplayPort cable to each of the adapter’s DisplayPort

output ports and to your DisplayPort monitors.

6. Once your computer has restarted, connect the Integrated USB

3.0 input cable to a USB port on your computer.

Important notes:

If connecting multiple USB video adapters or docking stations

to a single computer:

• This USB video adapter uses a DisplayLink family chipset.

If you’re connecting this device to a computer along with

additional USB video adapters or docking stations, avoid using

devices with dierent family chipsets, such as Trigger or Fresco

Logic®.

• To connect multiple USB display adapters to the same

computer, you don’t need to install any additional drivers.

Repeat steps 5 through 6 for each video adapter.

• You may be prompted to restart your computer after

connecting each USB video adapter.

Installation

DisplayPort

output port #2

If you’re running Windows 7, macOS 10.10 or

macOS 10.11, you must ensure the latest drivers

from the StarTech.com website are installed before

connecting the USB video adapter to the computer.

If you’re running Windows 8 macOS (or later), or

10.12 (or later), you can utilize an internet

connection to automatically install the latest drivers

as soon as the USB video adapter is connected to the

computer.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

macOS

1. Click .Menu

2. Click System Preferences.

3. Click Displays.

4. To adjust resolution, use the tab.Display

5. To adjust orientation, use the Arrangement tab.

Supported resolutions

Audio will only output over DisplayPort, when the adapter is initially

installed and connected. To play back audio from another audio

device instead of DisplayPort, such as your computer speakers, you

must manually change the default audio device.

Windows