StarTech.com ST121USBHD Bedienungsanleitung
StarTech.com
AV extender
ST121USBHD
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr StarTech.com ST121USBHD (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war fĂĽr 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Quick install guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: GuĂa del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/08/2016
For the latest information, technical specications, and support for
this product, please visit www.startech.com/ST121USBHD.
Packaging contents
• 1 x HDMI over CAT6 transmitter
• 1 x HDMI over CAT6 receiver
• 2 x Ethernet cables
• 2 x USB to Mini-USB cables
• 1 x universal power adapter (NA/EU/UK/AU)
• 1 x mounting kit
• 1 x quick install guide
System requirements
• 1 x HDMI® enabled video source device with cabling (i.e. computer,
Blu-ray Player)
• 1 x HDMI enabled display with cabling (i.e. television, projector)
• 2 x available USB power source or AC electrical outlet at the
location for the transmitter and receiver
• (Optional) 4x USB peripheral devices
ST121USBHD
HDMI® over CAT6 extender with 4-port USB hub - up to 165 ft (50m)
*actual product may vary from photos
Preparing your site
1. Determine where the local video source (i.e. computer, Blu-ray
Player) will be located and set up the device.
2. Determine where the remote display will be located and place or
mount the display appropriately.
Notes: Please ensure that the transmitter and receiver units are
situated near an available AC electrical outlet or a USB power source.
Make sure all devices are turned o before beginning installation.
Hardware Installation
1. Install Transmitter Unit
a) Position the transmitter unit near the video source (i.e.
Computer, Blu-ray Player).
b) Connect an HDMI cable from the video source device (i.e.
computer, Blu-ray Player) to the HDMI in port on the transmitter
Unit.
c) If you’ve chosen to connect USB peripheral devices (Optional)
using the USB hub, please connect a USB to Mini-USB cable (not
included) from the USB host connection port on the transmitter
to an available USB port on your source device (i.e. computer).
Note: All USB ports on this extender are USB 2.0
Note: While two USB to Mini-USB cables are included, these are
required to provide power to the extender and receiver. A third
cable that is not included is required for console support.
Product overview
Front view
Rear view
Transmitter Unit Receiver Unit
Transmitter Unit Receiver Unit
HDMI
input
USB host
connection
(Mini-USB)
HDMI
output
USB hub
ports
power
source
(Mini-USB)
link out A (RJ-45
Connector)
3. link out B
(RJ-45 Connector)
power
source
(Mini-USB)
3. link out B
(RJ-45 Connector)
link out A (RJ-45
Connector)
USB hub ports
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for
repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
d) Connect a power source to the transmitter unit, by connecting
one of the included USB to Mini-USB cables from the power
source port on the transmitter unit to a USB power source. If a
USB power source is not available, you can connect the included
power adapter to an electrical outlet.
2. Install RJ45 terminated Cat5e or CAT6 Ethernet Cables
a) Connect an RJ45 terminated Cat5e/6 Ethernet cable
(not included) to the link out A (RJ-45 connector) on the
transmitter unit.
b) Connect another RJ45 terminated Cat5e/6 Ethernet cable
(not included) to the link out B (RJ-45 connector) on the
transmitter unit.
Note: If you are using surface cabling, ensure you have enough
Ethernet cabling to connect the Host Unit to the Remote Unit’s
location, and that each end is terminated with an RJ45 connector.
The cabling should not go through any networking equipment
(i.e. router, switch).
OR
If you are using premises cabling, ensure that the Ethent cabling
between the Host Unit and the Remote Unit has been properly
terminated in a wall outlet in each location and there is a patch
cable long enough to connect the Remote Unit and the Host Unit
to their respective outlets. The cabling should not go through any
networking equipment (i.e. router, switch).
c) Connect the other end of the Ethernet cable (from link out A)
to the link in A (RJ-45 connector) on the receiver unit.
d) Connect the other end of the Ethernet cable (from link out B)
to the link in B (RJ-45 connector) on the receiver unit.
3. Install Receiver Unit
a) Position the receiver unit near the video display (i.e. television,
projector).
b) Connect the video source to the HDMI out port on the receiver
unit using an HDMI cable (not included).
c) (Optional) If you’ve chosen to connect USB peripheral devices
through the extender, connect each of your peripheral devices to
one of the available USB hub ports on the receiver unit.
d) Connect a power source to the receiver unit, by connecting one
of the included USB to Mini-USB cables from the power source
port on the transmitter unit to a USB power source. If a USB power
source is not available, you can connect the included power
adapter to an electrical outlet.
4. Your source video image will now appear on the remote video
display, and your USB peripheral devices can be operated
from the remote location.
Note: The performance of this extender will vary depending
on the length and type of your cabling. Please review the chart
below to determine the best solution for your setup.
Cable type Distance Max. resolution
Shielded CAT6 50m (maximum) 1080i
40m 1080p
Unshielded CAT6 30m (maximum) 1080p
Shielded and
unshielded CAT5e 15m (maximum) 1080p
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | AV extender |
| Modell: | ST121USBHD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com ST121USBHD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung AV extender StarTech.com
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Bedienungsanleitung AV extender
- AV extender Approx
- AV extender Gigabyte
- AV extender Hama
- AV extender Manhattan
- AV extender Nedis
- AV extender Philips
- AV extender Roland
- AV extender Allnet
- AV extender Eminent
- AV extender König
- AV extender KEF
- AV extender Teufel
- AV extender Abus
- AV extender Lindy
- AV extender Tripp Lite
- AV extender Audio Pro
- AV extender Marmitek
- AV extender Marshall Electronics
- AV extender Black Box
- AV extender Techly
- AV extender Ebode
- AV extender Vision
- AV extender InFocus
- AV extender Kindermann
- AV extender Monoprice
- AV extender Ecler
- AV extender AG Neovo
- AV extender Genexis
- AV extender Digitus
- AV extender DataVideo
- AV extender LevelOne
- AV extender UTEPO
- AV extender Kramer
- AV extender Intellinet
- AV extender AJA
- AV extender Planet
- AV extender Peerless
- AV extender Steren
- AV extender AMX
- AV extender Vivotek
- AV extender Adder
- AV extender Epcom
- AV extender Siig
- AV extender TV One
- AV extender Rose
- AV extender Iogear
- AV extender Smart-AVI
- AV extender Aitech
- AV extender Gefen
- AV extender Avocent
- AV extender IMG Stage Line
- AV extender CYP
- AV extender ASSMANN Electronic
- AV extender ATen
- AV extender KanexPro
- AV extender SmartAVI
- AV extender Oehlbach
- AV extender Wentronic
- AV extender Crestron
- AV extender Accell
- AV extender Dynaudio
- AV extender Extron
- AV extender Atlona
- AV extender Rocstor
- AV extender WyreStorm
- AV extender Lightware
- AV extender SWIT
- AV extender Hall Research
- AV extender Matrox
- AV extender Blustream
- AV extender Rose Electronics
- AV extender MuxLab
- AV extender Seco-Larm
- AV extender Kanex
- AV extender C2G
- AV extender ConnectPro
- AV extender TechLogix Networx
- AV extender Micro Connect
- AV extender Intelix
- AV extender HELGI
- AV extender Liberty
- AV extender Comprehensive
- AV extender PureLink
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
15 September 2024
13 September 2024
12 September 2024
10 September 2024
8 September 2024
6 September 2024