StarTech.com ST121HDBTSC Bedienungsanleitung
StarTech.com
AV extender
ST121HDBTSC
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com ST121HDBTSC (2 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Quick-Start Guide
Manual Revision: 06/20/2018
For the full manual, technical specications, and support for
this product, please visit www.startech.com/ST121HDBTSC.
Packaging Contents
• 1 x HDBaseT Transmitter
• 1 x HDBaseT Scaler Receiver
• 1 x IR Remote Control
• 1 x RJ-11 to RS-232 Adapter
• 1 x CAT5 Cable
• 1 x RJ-11 Cable
• 2 x Sets of Mounting Brackets
• 1 x Universal Power Adapter (NA/JP, EU, UK, ANZ)
• 2 x Sets of Rubber Feet
• 1 x Quick-Start Guide
• 1 x IR Receiver
• 1 x IR Blaster
Requirements
• 1 x Local HDMI Display with Cabling
• 1 x Remote HDMI Display with Cabling
• (Optional Setup) 1 x DisplayPort Video Source with Cabling
• (Optional Setup) 1 x VGA Video Source with Cabling
• (Optional Setup) 2 x HDMI Video Sources with Cabling
Product Diagram
Actual products may vary from photos
Transmitter Front View
1. Selected Port LEDs
2. IR Sensor
3. Output Port LED
4. Input Selection Buttons
5. VGA Input Button/
Function Button 1
6. Function Button 2
7. Output Selection Buttons
Transmitter Rear View
ST121HDBTSC
Multi-Input HDBaseT Extender Switch and Scaler - 1080p
1. DC 12V Power Port
2. IR Out/In Ports
3. HDMI Output Port
4. EDID Copy Button
5. 3.5 mm Audio In Port
6. VGA Input Port
7. DP Input Port
8. Ground
9. (Control) RJ-11 Serial Jack
10. HDBaseT Output Port
11. Auto/Inventory EDID Switch
12. Mode Switch
13. HDMI Input Port #2
14. HDMI Input Port #1
Receiver Front View
1. Input LED (1 - 4)
2. Status LED
3. Enter Button
4. Navigation Buttons
5. Exit Button
6. Menu Button
Receiver Rear View
1. RJ11 Control Port
2. Ground
3. DC 12V Power Port
4. IR In/Out Port
5. Port Link Switch
6. HDBaseT Input Port
7. HDMI Output Port
8. 3.5 mm Audio Out
Port
Installation
Notes: Make sure that the HDBaseT Transmitter and HDBaseT
Receiver are each located near an AC power outlet and that all
devices connected to them are turned o.
1. Set up the video sources (HDMI, DisplayPort and VGA) and
remote display.
2. On the back of the HDBaseT Transmitter, connect each of the
Video Sources (HDMI, DisplayPort and VGA) to the corresponding
input ports (cables sold separately).
1 2 3 4 5 6 7
8 9 10 11 12 13 14
12
3 4 5 6
4
1
2 3 567 8
1 2 3
75 64
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
• If Class 1 Laser Product. Laser radiation is present when the system is open.
• Wiring terminations should not \be made with the product and/or electric lines under power.
• Product installation and/or mounting should be completed by a certied professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
• Si le produit est Laser de Classe 1, le rayonnement laser est présent lorsque le système est ouvert.
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et dans le respect des normes locales et du code de construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et acheminés de façon à éviter tout risque électrique, de chute ou de sécurité
Pour consulter les manuels, les vidéos, les FAQ, les contrôlleurs, les téléchargements, et plus encore, visitez: www.StarTech.com/fr/support-produit.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
• クラス1レーザー製品では、システムが開放状態の場合、レーザー光が照射されています。
• 電源が入っている状態の製品または電線の終端処理を行わないでください。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するようにしてくだ
さい。
マニュアル、動画、FAQ、ドライバ、ダウンロード情報などを、www.StarTech.com/jp/Supportにてご覧いただけます。
Misure di sicurezza
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
• Prodotto laser di Classe 1. Quando il sistema è aperto sono presenti radiazioni laser.
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico professionale certicato che conosca le linee guida locali sulle norme edilizie e
sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la
sicurezza.
Per visualizzare manuali, video, domande frequenti, download e altro ancora, visita
www.StarTech.com/it/assistenza-e-vendite.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
• Om laserproduktet är Klasse 1, laserstrålning avges när systemet är öppet.
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
För nedladdningar, handböcker, videor och vanliga frågor, drivrutiner, besök www.StarTech.com/se/support.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.
startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.
com/downloads
Warranty Information
This product is backed by a one-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor
costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed
the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
JP: jp.startech.com取扱説明書-
3. Connect a CAT5 cable to the HDBaseT Output Port on the
HDBaseT Transmitter and to the HDBaseT Input Port on the
HDBaseT Receiver.
Note: Properly grounding the HDBaseT Transmitter and HDBaseT
Receiver can prevent damage and improve audio/video signal
quality.
4. Connect the Universal Power Adapter to the DC 12V Power Port
on either the HBaseT Transmitter or HDBaseT Receiver and to an
AC power outlet to power both the HDBaseT Transmitter and
HDBaseT Receiver (using the Power Over Cable feature).
Notes: Only use the type of HDBaseT Receiver included with this
kit. Mixing hardware with a dierent HDBaseT kit can damage your
equipment, due to the Power Over Cable feature.
Do not route the cable through any networking equipment.
Connecting Two Displays
1. On the back of the HDBaseT Transmitter, connect an HDMI cable
to the HDMI Output Port and to the HDMI port on a Local Display
(cables sold separately).
2. On the back of the HDBaseT Receiver, connect an HDMI cable to
the HDMI Output Port and to the HDMI port on a Local Display
(cables sold separately).
3. Power on each of your connected devices. The image from your
Video Source will now appear on your Remote Display.
EDID Settings
Adjust the EDID settings, if you’re experiencing poor resolution or
inconsistent audio/video output.
• On the back of the HDBaseT Transmitter, conrm that the Auto/
Inventory EDID switch is set to position 1.
Copying EDID Settings
1. On the back of the HDBaseT Transmitter, set the Auto/Inventory
EDID switch to either option 3 (copy video EDID and emulate
audio EDID) or 4 (copies video EDID and audio EDID).
Remote Display:
• To copy EDID settings from a Remote Display, press and hold
the EDID Copy Button for 3 seconds until the Remote LED
ashes green.
Local Display:
• To copy EDID settings from a Local Display, press and hold the
EDID Copy Button for 6 seconds until the Local LED ashes
green.
Switching Between Video Sources
1. On the back of the HDBaseT Transmitter, move the Mode Switch
Button to position 1.
2. On the front of either the HDBaseT Transmitter or the HDBaseT
Receiver, press the Input Selection Button that corresponds with
your desired video source.
3. The selected port’s LED will light up and the selected video
source will appear on the HDMI and HDBaseT displays.
Remote Control
1. On the right side of the IR Remote Control, press buttons 1 - 4 to
switch between HDMI 1, HDMI 2, DisplayPort, and VGA ports.
2. The selected port’s LED will light up, indicating the active port.
Resolution
The maximum resolution capability of the Extender Switch is Full HD
(1920 x 1080) up to 70 m (328 ft.).
Adjusting Resolution from the HDBaseT Receiver
1. On the HDBaseT Receiver, press the Menu Button to access the
OSD (On Screen Display) Main Menu.
2. On the OSD Main Menu, use the Navigation Buttons to select
Output Resolution and press the Enter Button.
3. On the Output Resolution sub-menu use the Navigation Buttons
to navigate/select a resolution and press the Enter Button to save
your changes.
The following options may also appear when changing your
resolution settings.
Revert
• Reverts back to the last resolution setting prior to saving.
Keep
• Saves the new resolution settings.
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | AV extender |
| Modell: | ST121HDBTSC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com ST121HDBTSC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung AV extender StarTech.com
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Bedienungsanleitung AV extender
- AV extender Approx
- AV extender Gigabyte
- AV extender Hama
- AV extender Manhattan
- AV extender Nedis
- AV extender Philips
- AV extender Roland
- AV extender Allnet
- AV extender Eminent
- AV extender König
- AV extender KEF
- AV extender Teufel
- AV extender Abus
- AV extender Lindy
- AV extender Tripp Lite
- AV extender Audio Pro
- AV extender Marmitek
- AV extender Marshall Electronics
- AV extender Black Box
- AV extender Techly
- AV extender Ebode
- AV extender Vision
- AV extender InFocus
- AV extender Kindermann
- AV extender Monoprice
- AV extender Ecler
- AV extender AG Neovo
- AV extender Genexis
- AV extender Digitus
- AV extender DataVideo
- AV extender LevelOne
- AV extender UTEPO
- AV extender Kramer
- AV extender Intellinet
- AV extender AJA
- AV extender Planet
- AV extender Peerless
- AV extender Steren
- AV extender AMX
- AV extender Vivotek
- AV extender Adder
- AV extender Epcom
- AV extender Siig
- AV extender TV One
- AV extender Rose
- AV extender Iogear
- AV extender Smart-AVI
- AV extender Aitech
- AV extender Gefen
- AV extender Avocent
- AV extender IMG Stage Line
- AV extender CYP
- AV extender ASSMANN Electronic
- AV extender ATen
- AV extender KanexPro
- AV extender SmartAVI
- AV extender Oehlbach
- AV extender Wentronic
- AV extender Crestron
- AV extender Accell
- AV extender Dynaudio
- AV extender Extron
- AV extender Atlona
- AV extender Rocstor
- AV extender WyreStorm
- AV extender Lightware
- AV extender SWIT
- AV extender Hall Research
- AV extender Matrox
- AV extender Blustream
- AV extender Rose Electronics
- AV extender MuxLab
- AV extender Seco-Larm
- AV extender Kanex
- AV extender C2G
- AV extender ConnectPro
- AV extender TechLogix Networx
- AV extender Micro Connect
- AV extender Intelix
- AV extender HELGI
- AV extender Liberty
- AV extender Comprehensive
- AV extender PureLink
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
15 September 2024
13 September 2024
12 September 2024
10 September 2024
8 September 2024
6 September 2024