StarTech.com RJ4511TOOL Bedienungsanleitung
StarTech.com
Tang
RJ4511TOOL
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr StarTech.com RJ4511TOOL (1 Seiten) in der Kategorie Tang. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
Wiring Tools
User’s Guide
StarTech.com has the tools you need to get any cable job finished,
including the DUCTCUTTER, our sharp solution for cutting through,
you guessed it, plastic wiring ducts. This StarTech.com tool is specially
designed for manipulating RJ-45 and RJ-11 connectors and saves
valuable time and effort on any related cable job.
RJ45 and RJ11 Strip & Crimp Tool
RJ4511TOOL
Lock
Stripper
Cutter
Handles
Safety
Modular Plug
Holder for 6
Position Use
Modular Plug
Holder for 8
Position Use
1. Hold the RJ4511TOOL with “Safety” side towards you.
Insert the cable you wish to cut in the cutter section of the
tool. Squeeze handles together to cut the wire.
2. Take the newly cut end and place it in the stripper
section of the tool. For a longer strip to remove place the
end of the cable at the backstop, for a shorter strip place it
at the tab. Squeeze handles together and release slightly.
Pull off the stripped insulation.
3. Insert the cable and outer jack into the appropriate
modular plug holder. Squeeze handles firmly. Release and
remove the terminated plug.
Openning the Tool: Squeeze hanle firmly. The lock will
release. The tool is now ready to be used.
Locking the Tool: Squeeze handles together with one
hand. Push the lock in with the other hand and release the
handles. The tool is now secured.
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Tang |
| Modell: | RJ4511TOOL |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com RJ4511TOOL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Tang StarTech.com
18 August 2024
Bedienungsanleitung Tang
- Tang 3M
- Tang Scarlett
- Tang Leatherman
- Tang Milwaukee
- Tang Neutrik
- Tang Gefen
- Tang Extron
- Tang Valueline
- Tang WeidmĂĽller
- Tang Dataflex
- Tang PureLink
Neueste Bedienungsanleitung fĂĽr -Kategorien-
22 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024