Stagg 500 BAH Bedienungsanleitung
Lies die bedienungsanleitung für Stagg 500 BAH (4 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 46 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 23.5 Bewertungen. Hast du eine Frage zu Stagg 500 BAH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
FRONT PANEL
1) INPUT - Plug your bass in here. We recommend that you always use a high-quality shielded cable to
prevent any background noise interference or unwanted feedback.
2) VOLUME - This control determines the level of the input signal going into the amplier.
3) PASSIVE/ACTIVE - When released (or off), this selector switches the INPUT of the amplier to a high
impedance (sensitivity) circuit, suitable for basses with PASSIVE electronics. When pushed in (or on), it
connects the INPUT to a low impedance (sensitivity) circuit, suitable for use with ACTIVE basses.
4) TREBLE - This control determines the level of high frequencies in the output signal. Adding TREBLE will
make your bass sound brighter and sharper.
5) MID - This control determines the level of middle frequencies in the output signal. Adding MID will
make your bass sound rounder and fuller.
6) BASS - This control determines the level of low frequencies in the output signal. Adding BASS will make
your bass sound warmer and heavier.
7) COMPRESSION - This control reduces the dynamic range of the output signal and evens out the
changes in volume that occur according to how hard you play your instrument. Adding COMPRESSION will
make your bass sound smoother and clearer.
8) MASTER - This controls the overall listening level of the amplier. Adjust it to your preferred level.
9) CD/MP3 INPUT - This is a line level 1/4" (Ø 6.3 mm) stereo jack into which an MP3/CD/Tape player
may be connected.
10) EFX SEND - This amplier is equipped with an effects loop which allows you to plug effects between
the preamp and the power amp. The EFX SEND jack is a line level 1/4" (Ø 6.3 mm) output jack into which
you may connect one or several outboard effects, eg Flanger, Delay, Chorus etc. The EFX SEND should be
connected to the input jack of the rst effect in your chain.
11) EFX RETURN - This is a line level 1/4" (Ø 6.3 mm) input jack into which you should connect the
output jack of the last effect in your chain. The effects loop may also be used with a multi-effects rack
system, or with a single effect.
12) BALANCED OUT - This front panel XLR socket drives a post E.Q, post effects, balanced output signal
for connecting directly to one of the Balanced Microphone inputs of a mixing console.
13) POWER LED - When this red LED is lit, the amplier is ready to work. When it is off, it means the
amplier is powered off.
Features and Specications are subject to change without notice.
2 3 USER MANUALUSER MANUAL 500 BAH - 500 BA115 500 BAH - 500 BA115
1 2 3 4 5 6 7 8 9 10 1311 12
STAGG 500 BAH & STAGG 500 BA115
STAGG 500 BAH & STAGG 500 BA115
1 2 4 5 5 53
500 BAH 500 BA115
BACK PANEL
WARNING
This amplier must be earthed. Please check that the supply voltage details given on the rating label
(located on the rear panel) are in accordance with your electricity supply.
1 POWER SWITCH - This switch turns the amplier on or off.
2 POWER FUSE - In the event of the power fuse having to be replaced, rst unplug the power cable from
the mains outlet. Then remove the fuse cover and replace the power fuse with one of the same type and
value. Never plug the power cable back into the mains outlet without the fuse cover. When powering on
the amplier, if the power fuse blows up again, go to a suitable service centre for repair.
3 MAINS INPUT - This is the input socket into which the mains power cable must be connected. This
amplier is supplied with a power cable with a moulded-on plug. If the socket outlets in the home are
not suitable for the plug supplied with this amplier, use an appropriate plug adapter that can handle the
power required for this amplier.
4 VOLTAGE SELECT - This switch selects the chosen voltage level between 110-120VAC and 220-
240VAC as appropriate. This switch may be accessed by unscrewing the safety cover. Always make sure
that the selected voltage level is in accordance with your electricity supply.
5 SPEAKER OUT - The 500 BAH head features two external speaker sockets to connect one (or two)
external Speaker Cabinet(s) providing the total load impedance is not lower than 8 Ohms, while the 500
BA115 combo allows you to plug one external Speaker Cabinet only with a minimum load impedance of 16
Ohms, i.e: Stagg 300 BC115 (1x 15”) and Stagg 300 BC410 (4x 10”), 300W RMS/16Ω Speaker Cabinets
for bass ampliers.
TECHNICAL SPECIFICATIONS 500 BAH EU+UK 500 BA115 EU+UK
Description 500W Bass Amp Head 500W Bass Combo
and 1x 15" Speaker
Max. Rated Power 500 Watts RMS @ 8 Ohms 500 Watts RMS @ 8 Ohms
Speakers (N * Ø/ P/ Z) 1 x 15"/ 300W/ 16 Ohms
External Speaker Out 2 x SPK 1 x SPK
Minimum Load 8 Ohms 16 Ohms
Frequency Response 40 Hz to 20 kHz 40 Hz to 20 kHz
Total Harmonic Distortion 0.5% 0.5%
Signal to Noise Ratio - 68 dB @ max Rated Power - 68 dB @ max Rated Power
Input Impedance 220k Ohms 220k Ohms
Power Consumption 900 Watts max 900 Watts max
Maximum Input Level 45 mV RMS 45 mV RMS
Maximum Gain 47 dB @ 1 kHz 47 dB @ 1 kHz
Dimensions (H x L x P) 23.5 x 73 x 38 cm 72.5 x 73.5 x 38 cm w/o casters
Dimensions (H x W x D) 9.2 x 28.7 x 15 in 28.5 x 28.9 x 12.2 in w/o casters
Weight 29.5 kg / 65.0 lb 55.3 kg/ 121.9 lb
RoHS
compliant
4
USER MANUAL 500 BAH - 500 BA115
INSTRUCTIONS FOR USE
Plug the mains lead into a suitable power socket and connect your instrument to the input socket of the
amplier with a suitable guitar lead (this lead is not supplied with the amplier, but is normally supplied
with the bass guitar). Finally, press the Power Switch to the ON position, the power switch will light up and
your amplier is ready for use.
IMPORTANT SAFETY INSTRUCTIONS
READ AND KEEP THESE INSTRUCTIONS HEED ALL WARNING. .
• If, after you have followed the instructions outlined above, your amplier fails to function, please contact
your dealer. Under no circumstances should the amplier be opened. Leave all servicing to qualied
personnel.
• Electrical appliances must never be used in conditions of high humidity or heat.
To prevent any risk of re or electric shock, never spill or splash liquids on the amplier.
Should this happen, unplug the power cable from the mains outlet immediately.
• We would like to draw your intention to the instructions printed on the notice attached to the back of
the amplier.
• Exposure to extremely high sound pressure levels may cause permanent hearing damage.
Please use this amplier responsibly for you and your neighbourhood.
MARKING & CONFORMITY
1. The CE mark on this product means it conforms to the EMC Directive (2004/108/EC), CE marking
Directive (93/68/EEC) and Low Voltage Directive (2006/95/EC).
2. The “Crossed-out Wheeled Bin” is to draw your attention to the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
3. “RoHS compliant” means this device conforms to the Directive (2002/95/EC) on the restriction of the use
of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead, Cadmium,
Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers (PBDE).
DISTRIBUTOR/DEALER
EMD Music 01-2009-UK
USER MANUAL
AMPLIFIER HEAd - 500 BAH EU+UK
COMBO AMPLIFIER - 500 BA115 EU+UK
BASS BACKLINE SERIES
BASS AMPLIFIER
UK
Produktspezifikationen
| Marke: | Stagg |
| Kategorie: | Empfänger |
| Modell: | 500 BAH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Stagg 500 BAH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Stagg
1 Dezember 2023
Bedienungsanleitung Empfänger
- Comprehensive
- Hirschmann
- Humantechnik
- Leviton
- Technical Pro
- Taga Harmony
- Neumann
- Ampeg
- Samson
- Boss
- Chamberlain
- Dynacord
- LD Systems
- Ocean Matrix
- Shanling
Neueste Bedienungsanleitung für -Kategorien-
30 Juni 2025
29 Juni 2025
29 Juni 2025
28 Juni 2025
26 Juni 2025
26 Juni 2025
26 Juni 2025
26 Juni 2025
26 Juni 2025
26 Juni 2025