Speco Technologies ZIPK8WN2 Bedienungsanleitung

Speco Technologies Sicherheitskamera ZIPK8WN2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies ZIPK8WN2 (3 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Speco Gray Viewer Series Surveillance System
After Wireless NVR startup is completed, the Startup Wizard will be displayed. Wizard setting menu
includes: Set Admin Password ,Homepage, HDD Management, Network Configuration, Email
Configuration , Record Schedule and General System Configuration.
Set Admin Password
2) Homepage and HDD Management
You can click “Cancel” to skip Start Wizard. Check “Don't show this window next time" if you
don’t want to display Start Wizard when system start-up.
Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full.
For example, if you choose the option 7 days then only the last 7 days recordings are kept
on the HDD. To prevent overwriting any old recordings, select Disable. If you have disabled
this function, please check the HDD status regularly, to make sure the HDD is not full.
Please create a user name and password for your device.
Select the HDD which you want to format, and then click “Format HDD” button to format the HDD.
The hard drive comes pre formatted if a new hard drive is installed for the first time - , ,
it will need to be reformatted .
Install the cameras on the walls and connect the power adapters to
each camera. Tip: The recorder should be at the center of all the
cameras for best performance.
Plug in the Wireless NVR power adapter to the wall outlet. You
may use the included power cable extensions for the cameras
and/or recorder to desired power outlet if needed.
Connect the Wireless NVR to your router using the LAN ports with
the included Ethernet cable so that you may view the cameras
from a web browser or mobile device (optional).
When the Wireless NVR is powered on,it will automatically start the pairing
process with the cameras. Once the process is complete,the Wireless
NVR will display live video feeds from your cameras and then start
recording.
You will briefly see a live video on display before you start the Startup
Wizard.
To configure the advanced settings for device, please follow the Startup
Wizard instructions to complete installation as shown below.
(1)
(2)
(3)
(4)
NO Physical interface Connection
Ground connection A terminal to connect a separate ground cable .
* Make sure to add a ground cable in order to use the equipment safely .
SD SD Port
USB port Connect with USB .
HDMI
Connect with HDMI display devices such as PC monitor , .
WAN RJ45:( )
Network port
Connect with WAN Ethernet cable , .
Power port Connect with the power supply DC12V 2A included with the device , .
1
2
3
4
5
6
Antenna Receive signal from wireless camera .
7
1
3
57
6
4
22
1
3
57
6
4
22
(3)
(5)
(6)
5) Record Schedule
6) General System Configuration
3) Network Configuration 4) Email Configuration
This menu allows your recorder to send email notification on events such
as motion is detected or error events.Obtain the correct server and port
information from your email service provider.
Please check the DHCP box if connecting to a network that assigns IP addresses
automatically. A router will typically have DHCP capability.
: The IP address identifies the NVR in the network. It consists of four IP Address
groups of numbers between 0 to 255, separated by periods. For example,
“192.168.001.100”.
: This address allows the NVR to access the Internet. The format of the Gateway
Gateway IP Addressaddress is the same as the . For example, “192.168.001.001”.
: DNS1 is the primary DNS server and DNS2 is a backup DNS server. DNS1/DNS2
Usually should be enough just to enter the DNS1 server address.
Port
Web Port: This is the port that you will use to log in remotely to the NVR (e.g. using the Web
Client). If the default port 80 is already taken by other applications, please change it.
This is the port that the NVR will use to send information through (e.g. using Client Port:
the mobile app). If the default port 9000 is already taken by other applications, please
change it.
This is the port that the NVR uses to transmit real-time streaming to other RTSP Port:
devices (e.g. a streaming media player)
To log in remotely to the NVR using a web browser through DDNS, port forwarding UPNP:
must be set up in the router. Enable this option if the router supports UPnP.
This menu allows you to specify when the Wireless NVR records video
and define the recording mode for each channel. The recording schedule
lets you set up a schedule like, daily and hourly by Normal (continuous)
recording, Motion recording, and Alarm recording. To set the recording
mode, click first on the mode radio button (Normal, Motion, or Alarm),
then drag the cursor to mark the slots.
This menu allows you to configure the general parameters of the
system, such as Date, Time, Date Format, Time Format, Language,
Menu Timeouts, Mode.
4 Remote Access via Web Client
The NVR can be accessed remotely in multiple ways on the PC. The simplest way
is to access it using the Speco Gray Viewer application which is available for
download on our website. If on the same network as the NVR, enter the LAN IP
address of the NVR in Speco Gray Viewer. If the NVR is on a different network,
enter the P2P ID of the NVR. Internet Explorer can also be used for remote
access. There are 2 ways to access the NVR through Internet Explorer. First is
with a LAN IP address if the NVR is on the same network as the PC. Second, if
DDNS was set up, the NVR can be accessed through DDNS from a different
network.
Login to Web Client
Go to Device. Press ' ' a nd choose Manual to add a new device. Press the QR
code icon next to Device ID and scan the QR code on the NVR. Then enter the
client port (default 9000), user name, and password. Press "Save" to fi nish setup.
5 Remote Live View on Mobile Devices
Search for and install "Speco Gray Viewer".
1.
2.
3.
4.
Open the App Store(iOS)or play store(Android).
Open the Speco Gray app
ATTENTION!
As we are continuing to update our products with latest features, please download the
the following latest manual and tools from the link and QR code.
Scan QR use URL below this code or the to go to the product page below to download
the manual..
https://specotech.com/product/zipk8wn2

Produktspezifikationen

Marke: Speco Technologies
Kategorie: Sicherheitskamera
Modell: ZIPK8WN2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies ZIPK8WN2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Speco Technologies

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
Speco Technologies

Speco Technologies SIPMPBVFH Bedienungsanleitung

26 Mai 2024
Speco Technologies

Speco Technologies O2BFRM Bedienungsanleitung

26 Mai 2024
Speco Technologies

Speco Technologies O8FT1 Bedienungsanleitung

22 Mai 2024
Speco Technologies

Speco Technologies CVC71HRB Bedienungsanleitung

21 Mai 2024
Speco Technologies

Speco Technologies CVC812PC Bedienungsanleitung

19 Mai 2024
Speco Technologies

Speco Technologies Intensifier3 HTINTB8H Bedienungsanleitung

17 Mai 2024
Speco Technologies

Speco Technologies VLDT6M Bedienungsanleitung

16 Mai 2024
Speco Technologies

Speco Technologies O4VT1MN Bedienungsanleitung

14 Mai 2024
Speco Technologies

Speco Technologies HT61iLH Bedienungsanleitung

8 Mai 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-

ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM60-T Bedienungsanleitung

27 Juni 2024