Speco Technologies VLEDT1HW Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies VLEDT1HW (2 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
VLEDT1HG/W Series Color
Camera
3.5" External Adjustable Vandal-
3.5" External Adjustable Vandal-
3.5" External Adjustable Vandal-
3.5" External Adjustable Vandal-3.5" External Adjustable Vandal-
proof Eyeball Camera
proof Eyeball Camera
proof Eyeball Camera
proof Eyeball Camera proof Eyeball Camera
Specifications
Model VLEDT1HG/W
Pick-up Device 1/3" 960H CCD
Effective Pixels (H×V) NTSC:976×494
Sensing Area 4.9mm×3.7mm
Horizontal Resolution 700 TV Lines
Minimum Illumination 0.01 Lux, 0 Lux at IR on
S/N Ratio More than 52dB
Scanning System 2:1 Interlace
Synchronous System Internal
Electronic Shutter 1/50s(1/60s) 1/100,000s
IR Distance 98’
IR Leds 5 infrared LED 36 Φ
IR status IR on: under 10Lux, by CDS auto control
Gama Characteristic 0.45
Auto Gain Control Auto
White Balance Auto
Video Output 1.0Vp-p composite video, 75Ω
Lens 2.8-12mm Mega pixel Lens
Power/Current 12VDC/ IR on: 400mA, IR off: 80mA
Operating Temperature 14F122F
Storage Temperature -4F140F Note:
:
:
::Before applying power to the cam-
era, please read this UserGuide in detail.
INTRODUCTION
CONNECTING
PRODUCT FEATURES
DC12V
Power Supply
Monitor
TROUBLESHOOTING
Link wire rule
Power
Video
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to consti-
a risk of electric shock to persons.
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
DO NOT OPEN
*
*
*
* * Sensor (
(
(
(( )
)
)
) ) CCD
1/3" 960H CCD
*
*
*
* * Auto Gain Control (AGC)
Built-in auto gain control circuit. The color camera (AGC)
can get a high definition picture in low Lux condition.
*
*
*
* * Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The AES speed
can reach 1/100,000s.
*
*
*
* * Gamma Characteristic
Camera Gama characteristic is 0.45.
*
*
*
* * Night-time Vision
0 Lux with IR LED ON.
CAUTION:
To prevent electric shock and risk of fire hazards,
do NOT use anything other than the specified power source.
1. No picture after providing power
. Check the power supply voltage, it may be outside specification.
. Please check the connecting cables and monitors to determine if the
camera is connected correctly or not.
2. The picture has flowing interference ripples
. Check the ground of the monitor and other peripheral equipment that
are being used is the same ground as the camera.
3. The background color continuously changes
. A fluorescent bulb’s electromagnetic field can cause a color roll. This is
a proper phenomenon of the camera.
. To improve the image, try to increase the distance between the camera
and the bulb, or change the angle such that it doesn’t face the flores-
cent bulb.
Congratulations on your purchase of this Speco
product. This camera utilized the latest in sensors
and drivers. The most appealing characteristics of
this camera are day & night feature, and indoor &
outdoor applications. This product is a great addi-
tion to your CCTV system.
Please read this manual carefully to ensure proper
use of the product.
Installation Precautions:
:
:
::
Do not install the camera to extreme temperature condi-
tions. Only use the camera under conditions where tem-
perature is between 14f and 122f.
Never keep the camera pointed directly at the sun or a
bright object.
Do not mount the camera near a radiator or heater.
Power Supply Notes
The power supply must be regulated 12V supply.
The operating temperature must be within camera’s specifications.
For better image quality, the cable length for power and video output
should not be excessively long.

Produktspezifikationen

Marke: Speco Technologies
Kategorie: Bewakingscamera
Modell: VLEDT1HW

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies VLEDT1HW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewakingscamera Speco Technologies

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung für -Kategorien-