Speco Technologies VLED71B3G Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Speco Technologies VLED71B3G (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war fĂĽr 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
VLED71B3G Series Color
Camera
IR Bullet Camera
IR Bullet CameraIR Bullet Camera
IR Bullet Camera
Specifications
Model VLED71B3G
Pick-up Device 1/3" Sony Super HAD CCD
Effective Pixels (HĂ—V) NTSC:510Ă—492, PAL:500Ă—582
Sensing Area 4.9mmĂ—3.7mm
Horizontal Resolution 480 TV Lines
Minimum Illumination 0.1 Lux, 0 Lux at IR on
S/N Ratio More than 48dB
Scanning System 2:1 Interlace
Synchronous System Internal
Electronic Shutter 1/50s(1/60s)
1/100,000s
IR Distance 98’
IR Leds 36 pcs Φ5 infrared LED
IR status IR on: under 10Lux, by CDS auto control
Water Resistance IP66
Gama Characteristic 0.45
Auto Gain Control Auto
White Balance Auto
Video Output 1.0Vp-p composite video, 75Ω
Lens 4-9mm
Power/Current 12VDC/ IR on: 360mA, IR off: 100mA
Operating Temperature 14F122F
Storage Temperature -4F 140F
Note:Before applying power to the cam-
era, please read this UserGuide in detail.
INTRODUCTION
CONNECTING
DC12V Power Supply
Monitor
TROUBLESHOOTING
Link wire rule
Power
Video
The symbol is intended to alert the user to the presence of
Video
12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
DO NOT OPEN
* Sensor (CCD)
SONY 1/3" High Resolution CCD sensor.
* Auto Gain Control (AGC)
Built-in auto gain control circuit. The color camera (AGC)
can get a high definition picture in low Lux condition.
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The AES speed
can reach s. 1/100,000
* Gamma Characteristic
Camera Gama characteristic is 0.45.
* Night-time Vision
CAUTION:
To prevent electric shock and risk of fire hazards,
do NOT use anything other than the specified power
1. No picture after providing power
. Check the power supply voltage, it may be outside specification.
. Please check the connecting cables and monitors to determine if the
camera is connected correctly or not.
2. The picture has flowing interference ripples
. Check the ground of the monitor and other peripheral equipment that
are being used is the same ground as the camera.
3. The background color continuously changes
. A fluorescent bulb’s electromagnetic field can cause a color roll. This is
a proper phenomenon of the camera.
. To improve the image, try to increase the distance between the camera
and the bulb, or change the angle such that it doesn’t face the flores-
cent bulb.
Congratulations on your purchase of this Speco
product. This camera utilized the latest in SONY
sensors and drivers The most appealing charac-.
teristics of this camera are weather-resistance, day
& night feature, and indoor & outdoor applications.
This product is a great addition to your CCTV sys-
tem.
Please read this manual carefully to ensure proper
use of the product.
Installation Precautions:
â—Ź Do not install the camera to extreme temperature conditions.
Only use the camera under conditions where temperature
is between 14f and 122f.
â—Ź Never keep the camera pointed directly at the sun or a bright
object.
â—Ź Do not mount the camera near a radiator or heater.
Power Supply Notes


â—ŹThe power supply must be regulated 12V supply.
●The operating temperature must be within camera’s specifications.
â—ŹFor better image quality, the cable length for power and video output
should not be excessively long.


Produktspezifikationen

Marke: Speco Technologies
Kategorie: Sicherheitskamera
Modell: VLED71B3G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies VLED71B3G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sicherheitskamera Speco Technologies

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung fĂĽr -Kategorien-