Speco Technologies SPCDC6 Bedienungsanleitung

Speco Technologies Lautsprecher SPCDC6

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies SPCDC6 (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Where To Place Your In-Ceiling Speakers
Placement can make all the difference in how your speakers sound, and how easy they will be to
install. Carefully consider where your speakers should be positioned. For optimum performance,
speakers should be mounted to the left and right of the main listening area and a minimum of 8 to
10 feet apart (See Fig. 2). Avoid mounting speakers in stud cavities containing electrical wiring,
heating ducts, water pipes, etc. Make sure the ceiling materials are sturdy enough to support the
weight of the speakers.
Adjustable Tweeters (Fig. 3)
The tweeter in your Speco speaker may be adjusted, allowing you to tailor the speaker to better fit the
listening area. The overall smoothest response is achieved with the tweeter facing straight out; how-
ever, you may find the sound more pleasing by aiming tweeters toward a particular listening area. To
adjust the tweeter, grasp the outside of the tweeter plate and gently pivot it toward the listening area.
Speaker Installation In Existing Construction (See Fig. 4)
Once you have selected the location for your speakers, you are ready to install them.
You will need the following:
• Stud Finder • Drill & Drill Bits • Wire Cutter/ Strippers • Speaker Wire
• Pencil • Phillips Screwdriver • Utility Knife or Drywall Saw • Masking Tape
Speco recommends the use of 16-gauge wire minimum. For wire options, consult your retailer or
custom audio contractor.
1. Speco Speakers are designed to be installed in the ceiling or wall area between studs. Using a stud
finder, make sure you are between two studs. Tape the supplied template to the wall and lightly trace
around the inside with a pencil.
2. Cut the hole using your drywall saw. You may want to start with a small hole in the center of the
outline. This will allow you to check for any obstructions that may exist behind the desired location.
CAUTION: Be certain electrical wiring, water pipes or heating ducts do not interfere in the planned
installation areas prior to drilling or cutting the wall.
3. Run speaker wire from your amplifier or speaker switching device to the speaker location.
4. Carefully remove the grille and inner grille backing by simply pulling it away from the magnetic
baffle. (Note: The open cell
foam inner grille backing
is designed to hide speaker
components from view
and may be removed if
desired.) If you like the
standard white finish of
your Speco speakers grille,
skip to step 5, but if you
want your speakers to
blend in with a colored
wall or ceiling, now is
the time to paint your
Congratulations on choosing Speco
Architectural Loudspeakers. Like all
Speco products, great care has been taken
in their design. Their combination of
advanced engineering and state-of-the-art
materials will provide you with years of
listening pleasure, while blending
smoothly into your home’s decor. Before
you get started, it is a good idea to identify
all the parts and hardware (See Fig. 1).
Speaker with self-contained
mounting clamps
Metal grille with foam
inner grille cover
FIG. 2
Speco ceiling speak can be used as rearers
surround channels by mounting them (1)
on each side of (2) just behind or (3) in, ,
back of the viewing position.
1
1
2
2
3
3
FIG. 3
(Continued on reverse)
Model SPCDC6
61/2˝ Two-Way In-Ceiling Speaker Systems
Cutout template
Pi voting
tweeter
FIG. 1
FIG. 4
speaker’s perforated grille.
(Continued from front)
Remove the foam inner grille backing and put it
aside in a clean and dust free area for later reinstal-
lation if desired. Grille painting hint: Use a paint
roller that is nearly out of paint to first paint the
inside of the grille, then the outside. This will avoid
paint filling the grille perforations.
5. Attach the wire to the input terminals on the
rear of the speaker. Remember to maintain proper
polarity with the amplifier by attaching the posi-
tive (+) lead to the red terminal and the negative
(-) lead to the black terminal.
6. See Fig. 5. With the speaker wire attached to
the speaker, slide the speaker up inside the cut-out
hole. Center the speaker in the cut-out hole and
turn the four locking screws clockwise until the
speaker is drawn up snugly to the wall board from
behind, clamping the speaker in place. Try to tight-
en each screw equally. Replace the speaker grille
by placing it on the frame until the magnets cap-
ture it.
New Construction
1. Determine speaker locations and mark them
on your plans for future reference.
2. If possible, run speaker wires after HVAC
and electrical wiring is in place.
3. Secure speaker wires in place along the run
with insulated staples only and be careful not to
pierce the wire’s insulation. Allow a bit of slack
for expansion of building materials.
4. Needless to say, the actual speakers should
not be installed until the wall boar is in place.d
In the meantime, ve several feet of wirelea
coiled up and secured at the back side of the
mounting hole.
5. To complete the installation follow steps 2
through 5 above.
Operational Check
After making all connections, it’s a good idea to make sure every thing is working properly.
Turn on your surround or stereo system making sure the volume control is turned down and
that the balance control is in the center position. Activate a musical or movie source such as
FM, a CD or DVD player. Gently turn up the volume, you should hear sound coming from
your new Speco speakers. If no sound is heard from any or all speakers, switch off the sys-
tem immediately and check for open or loose connections, wrong polarity or shorts, or
proper source selection.
FIG. 5
Speco Indoor Speakers Lifetime Limited Warranty
This warranty is valid only on products purchased in the United States of America. This warranty
applies only to the original user/purchaser.
Subject to conditions and e lusions found below, this indoor audio speaker is warranted againstxc
manufacturing defects in material and workmanship for the lifetime of the product, including parts
and labor.
Speco Technologies will repair or replace (at our discretion) any parts found to be defective for
the warranty period specified. We will provide a replacement for any defective part.
Conditions
1. You must obtain a Return Authorization (RA) number for any merchandise being returned
to Speco Technologies, whether for return/exchange or repair, whether in or out of warranty.
2. This warranty will be honored only upon the presentation of the original dated bill of sale or
sales slip.
3. Transportation of the product to Speco Technologies for service is the responsibility of the user.
Repaired or replaced product will be returned prepaid during warranty period.
Exclusions
1. This warranty shall not cover improper adjustment of customer operated controls or products
which have been altered or abused.
2. This warranty shall not apply to the appearance of the product or accessory items including,
but not limited to cabinets, cabinet parts, knobs, etc.
3. This warranty does not apply to uncrating, setup, installation, or removal and/or reinstallation
of products prior to or after repair.
4. This warranty shall not apply to repairs or replacements necessitated by any cause beyond the
result of manufacture including, but not limited to, any malfunction, defects or failure caused by
or resulting from unauthorized service or inferior parts, neglect, accident, fire, flood, other acts
of nature or incorrect line voltage.
The foregoing is in lieu of all other expressed warranties and we do not authorize any party to
assume for us any obligation or liability. In no event shall we be liable for incidental or conse-
quential damage arising from the use of this product, or for any delay in the use of this product
due to causes beyond our control.
Some states do not allow limitations of how long an implied warranty lasts and/or do not allow
the exclusion or limitation of consequential damages. The above limitations on implied warranty
and consequential damages may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state
to state.
NOTE: For warranty purposes and your protection in the event
of theft or loss of this product, please fill in the information
below and keep with your sales receipt.
SPCDC6 Specifications
Power Handling: 5 - 65 Watts (100 Watts peak)
Efficiency: 90dB
Frequency Response: 48 Hz-21,000 Hz
Driver Complement: 61
/2˝ (165mm) mica-filled polylaminate cone woofer w/rubber surround
1/2˝ (13mm) pivoting liquid-cooled titanium anodized dome tweeter
Impedance: 8 ohms nominal
Speaker Dimensions: 91/8˝ (232 mm) dia. x 3˝ (76mm) D
Ceiling Cutout Dimensions: 77/8˝ (200 mm) dia.
200 New Highway, Amityville, NY 11701
For information regarding service or return,
Call us TOLL FREE: 1-800-645-5516
In Metro New York 631-957-8700
http://www.specotech.com
Date of Purchase: ____________________________
Where Purchased: ____________________________
Purchase Price: ______________________________
Speco Technologies is constantly developing and improving products. Rev. 4/ /202021

Produktspezifikationen

Marke: Speco Technologies
Kategorie: Lautsprecher
Modell: SPCDC6

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies SPCDC6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Speco Technologies

Speco Technologies

Speco Technologies SPC15R Bedienungsanleitung

16 August 2024
Speco Technologies

Speco Technologies SP-5CLCC Bedienungsanleitung

16 August 2024
Speco Technologies

Speco Technologies SPC40RP Bedienungsanleitung

16 August 2024
Speco Technologies

Speco Technologies SP6MAWT Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies DMS-3TSW Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies SPC10T Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies SP6ECS Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies SPRK65CGT Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies SP525C Bedienungsanleitung

15 August 2024
Speco Technologies

Speco Technologies WB86T Bedienungsanleitung

15 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024