Speco Technologies Intensifier IP O2ID22 Bedienungsanleitung

Speco Technologies Sicherheitskamera Intensifier IP O2ID22

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies Intensifier IP O2ID22 (36 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
Please read this manual carefully before operating the unit and keep it for further reference
User Manual
Intensifier® IP Camera
(O2iB92/O2iD22/O2iD21M/O2iB91M)
Welcome
Thank you for purchasing this network camera!
Please read this manual carefully before operating the unit and retain it for future reference.
Should you require any technical assistance, please contact Speco Technologies Technical Support.
Important Safeguards and Warnings
1Electrical Safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same time; it may result in
device damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
Speco Technologies assumes no liability or responsibility for any fires or electrical shock caused by improper
handling or installation.
2Transportation
Heavy stress, violent vibration or exposure to water is not allowed during transportation, storage and installation.
3Installation
Handle the device with care. Keep the device right side up.
Do not apply power to the camera before completing installation.
Do not place objects on top of the camera.
4Repair Professionals
All examination and repair work should be done by qualified personnel only.
Speco Technologies is not liable for any problems caused by unauthorized modifications or user-attempted
repair.
5Environment
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive
substances, etc.
This product should be transported, stored, and used only in the specified environments as stated above.
Do not aim the camera at a strong light source, as it may cause overexposure of the picture, and may affect the
longevity of the camera’s sensors.
Ensure that the camera is in a well ventilated area to prevent overheating.
6. Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt off of the lens, use an air blower or a microfiber cloth.

Produktspezifikationen

Marke: Speco Technologies
Kategorie: Sicherheitskamera
Modell: Intensifier IP O2ID22

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies Intensifier IP O2ID22 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sicherheitskamera Speco Technologies

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-