Speco Technologies H8D6M Bedienungsanleitung

Speco Technologies Sicherheitskamera H8D6M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies H8D6M (7 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
H8D6M/H8B6M
Warnings
■
Speco Tech nologies is not respons ible for any problems caused by improper operation or repair.
■
■ All in stallation an d operation here should conform to local electrical safety codes.
■ Mak e sure the po wer supp ly v o ltage is correct before u sing the camera.
■ Do not drop the camera or su bject it to physical shock.
■ Do not use th e device bey o nd sp ecified voltage range.
■ Do not place the camera in extremely hot, cold (the operating temperature shall be (-4˚F~122˚F), dusty or
damp locations, and do not expose it to high electromagnetic radiation.
■ To avo id heat accumulation, good ventilation is required for op erating environment.
If th e product does not work properly, please con tact the dealer or wh ere the product was purchased.
Keep away from liquid while in use.
sensitiv ity, low noise and distortion and supp orts HD video transmission with the common coaxial cable,
ensu rin g the requirement of the HD monitoring in the traditional surveillance system.
This camera series is th e latest techno logy and advanced circuit design , which features high definition and
Introduction
● Hig h Reso lu tion
Adopt high performance sensor, providin g hig h definition and clear image.
● Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
● Hig h L ig ht Com pensa tion HLC ( )
Mask and compensation the high ligh t area.
● DNR
Reduce noise from brightness and colo r sig nal .
● OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
● White Balance
Adju st the co lor temperature according to the en vironmen t automatically.
● ICR Auto Switch
The filter will filter infrared light during th e day time and ch ange to normal at night to
ensu re a high sensitivity and clear image .
● AGC
Adju st th e gain of amplifier, enabling th e camera to output the stan d ard video sig nal in d ifferent
ligh ting condition.
● Wide Dynam ic Range (WDR)
When there are both v ery b rig ht and very dark areas simultaneously in the field of view, th is function
will b alance the brigh tness level and provide clear images.
1
● Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: F our video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng enou gh to w it hst and t hr ee ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
You’d better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
►Mounting for H8B6M
1. Drill the screw holes and the cable hole on the wall according to the drill template.
∅4.6
∅25.1
∅82.0
∅72.2
120°
120°
62.5mm
18.1mm
36.1mm
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.

Produktspezifikationen

Marke: Speco Technologies
Kategorie: Sicherheitskamera
Modell: H8D6M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies H8D6M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Speco Technologies

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
Speco Technologies

Speco Technologies SIPMPBVFH Bedienungsanleitung

26 Mai 2024
Speco Technologies

Speco Technologies O2BFRM Bedienungsanleitung

26 Mai 2024
Speco Technologies

Speco Technologies O8FT1 Bedienungsanleitung

22 Mai 2024
Speco Technologies

Speco Technologies CVC71HRB Bedienungsanleitung

21 Mai 2024
Speco Technologies

Speco Technologies CVC812PC Bedienungsanleitung

19 Mai 2024
Speco Technologies

Speco Technologies Intensifier3 HTINTB8H Bedienungsanleitung

17 Mai 2024
Speco Technologies

Speco Technologies VLDT6M Bedienungsanleitung

16 Mai 2024
Speco Technologies

Speco Technologies O4VT1MN Bedienungsanleitung

14 Mai 2024
Speco Technologies

Speco Technologies HT61iLH Bedienungsanleitung

8 Mai 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-

ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM60-T Bedienungsanleitung

27 Juni 2024