Speco Technologies H5T1M Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies H5T1M (3 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
l ITEM №: H5T1M
l Caution for Installation
1. In order to prevent electronic shock, don’t loosen any screws or covers.
2. Do not directly touch the front glass. If necessary, use a soft cloth
moistened with alcohol to wipe off the dust.
3. Avoid places where there are frequent vibrations or shocks.
4. Don t operate the camera beyond its temperature, power source ratings.
5. When any abnormalities happen, make sure to unplug the camera and
contact your local dealer.
l Packing
1. Camera X1
2. on box Juncti X1
3 . User Manual X1
4 . 4*34mm Screw X4
5 . 4*20mm Screw X4
6. - - Plastic Conical Anchor X4
7. Junction box cotton pad X1
8 . Hexagonal Wrench X1
9 . Mounting drawing paper X1
10. Screw nut waterproof ring X1
11. X4 Screw Silica Ring
12. Dome base rubber ring X1
13. Power X1 Connector Cable
l Specification
ITEM
H5T1M
IP Rating
IP66
Type
Removable IR Cut Filter
Signal System
NTSC/PAL
Pick Up Device
1/2.8 ” 5M SONY CMOS
Picture Elements
2 688 (H)X1944 (V)
Min Illumination
0Lux 24 Pieces IR LED ON
S/N Ratio
≥50 dB
Lens
2.7 13.5- mm Motorized Varifocal Fixed Iris Lens
3D
ON
Back Light Compensation
OFF
WDR
ON/OFF
OSD
With UTC Signal (DVR Control OSD)
Video Out- put
5MP TVI/AHD,4MP&2MP TVI/AHD/CVI,CVBS
Power Supply
DC12V ±10%
Current Consumption
60 0mA(MAX)
IR Effect Distance
49.2~65.6ft(indoor)
Dimension
Φ4.72”×3.93” inch
Weight
790g 27.86oz( )
Storage Temperature
- 9 22+14
Operating Temperature
- 22+122
Junction box
Dimension
Φ4.72””× ” inch1.59
Weight
2 0 55g (9. oz)
Re ark: Non may cause camera damagedm -regulative adaptor .
l video signal output switches
5MP 4in1 Motorized Eyeball Camera with Junction B ox
l Multi Format HD Analog UTC Control
( )1
( )2
( )3
( )4
( )5
1. Zoom/Focus
As picture shown, Click(1) enter into lens
menuClick (2) zoom in Click (4) zoom out;
Click (3)enter into camera OSD main menu
2. OSD
As picture show, Click (5) enter into main
menu operation page
O verview
Junction box
Installation
( )1
( )2
( )3
( ) 4 5
M20 Plastic Screw
1. Paste the drawing paper on the wall and drill holes
2. Paste the sponge pad on the back of junction
box er on back hole or Fix with M20 plastic stopp
side hole according to different installing needs
3Fix with 4pcs plastic rubbers into the wall, use M4
threaded screws to fix the junction box on the wall
4 Disassemble the camera as
picture shown, use M4*20mm
screws to fix camera base on the
junction box
5. Connect all cables and put them inside
the junction box, then fix the dome with the
metal ring, adjust camera viewing angle,
when finished, rotate the metal ring and fix
the metal ring with the screw.
Junction box
cotton pad
Drawing paper


Produktspezifikationen

Marke: Speco Technologies
Kategorie: Kamera
Modell: H5T1M

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies H5T1M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kamera Speco Technologies

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung für -Kategorien-