Speco Technologies H2LT1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies H2LT1 (8 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
H2LT1/H2LB1
Warnings
Speco Tech nolog ies is not responsible for any problems caused by improper operation or repair.
All in stallation and operation here should conform to local electrical safety codes.
Mak e sure the po wer supply v o ltage is correct b efore using the camera.
Do not drop the camera or su bject it to physical shock.
Do not use th e device bey ond sp ecified voltage range.
Do not place the camera in extremely hot, cold (the operating temperature shall be (-22˚F~122˚F), dusty or
damp locations, and do not expose it to high electromagnetic radiation.
To avo id heat accumulation, good ventilation is required for op erating environment.
If th e product does not work properly, please contact the dealer or wh ere the product was purchased.
Keep away from liquid wh ile in use.
sensitiv ity, low noise and distortion and supp orts HD video transmission with the common coaxial cable,
ensu rin g the requirement of the HD monitoring in the traditional surveillance system.
This camera series is th e latest techno logy and advanced circuit design , which features high definition and
Introduction
Hig h Reso lution
Adopt high performance senso r, providing high definition and clear image.
Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
DNR
Reduce noise from brightness and co lor signal .
OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
White Balance
Adju st the co lor temperature according to the environmen t automatically.
AGC
Adju st th e gain of amplifier, enabling th e camera to output the stan dard video sig nal in different
ligh tin g co n dition.
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
mak e it clearer.
1
Cables
Power Ca ble
Video Output
Video Switch Ca ble
Video Switch: Four v ideo ou tput mo des can be optional--AHD, TVI, CVI and CVBS
(a) remo ve the cover of the video swi tch cab le; (b) h old and press t h e button in the video
switch cab le fo r 5 seco nds to switc h the c urrent video ou t put.
2
Before y ou start, p lease make sure th at the wall or ceilin g is stro ng e noug h to withs t and th ree times
the wei g ht of th e camera. Please install and use the camera in the dry environment.
Youd better in stall back the lens cove r or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
►Mounting for H2LB1
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
48mm
48mm
4.5


Produktspezifikationen

Marke: Speco Technologies
Kategorie: Kamera
Modell: H2LT1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies H2LT1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kamera Speco Technologies

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung für -Kategorien-