Speco Technologies CVC62ILTB Bedienungsanleitung

Speco Technologies Sicherheitskamera CVC62ILTB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies CVC62ILTB (4 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Speco Technologies is constantly developing product improvements.

We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Rev.

4/20/2012

INSTRUCTION

MANUAL

600TVL Intense Light Miniature Weatherproof

Color Camera

CVC62iLTB(Black)

CVC62iLTW(White)

To avoid electrical shock, do not open the case of this product.

Only use a regulated DC 12V Power supply to operate this product.

Do not overload electrical outlets or extension cords. This can result in a fire or

electrical shock.

Keep this product away from strong magnetic fields.

Do not expose this product in direct sunlight or strong reflected rays.

Refer servicing to qualified personnel only.

Do not change or modify this product. This will void the warranty.

1/3” Sony Super-HAD™ CCD

600 TV Lines Super High Resolution

Compact Size - Only 1.89” In Diameter!

Vandal Resistant Housing

Cast Aluminium Construction

Integrated 4.3mm Fixed Lens

Impressive Picture Quality

Weatherproof (IP66 Rated)

12V DC Required

Loosen the two locking screws①, using the supplied hex-head wrench and remove

the mounting base.

Attach the mounting base② to a suitable solid surface, such as a wall or ceiling. On

partitioning locate a wall stud or ceiling joist. Secure the mounting base using the

supplied screws③. Fit the camera④ to the mounting base and fix in to position ②

using the two locking screws①, secure them with the hex-head wrench.

How to set the angle of view:

Loosen the two locking screws①, using the supplied hex-head wrench, and set the

desired camera angle by moving the camera right /left and up/down.

Connect the video connector (BNC) of the camera cable to the incoming video

cable. The other end of the video cable should be connected to a DVR or Monitor.

Plug the camera power connector (red DC jack) into the DC12V regulated power

supply. Switch on the power supply and the picture will b e displayed on a monitor.

Precautions

Features

Installation

•

1.89” dia

Image Sensor

Horizontal Resolution

Sensitivity

Lens

Effective Pixels (H x V)

Electronic Shutter Speed

Scanning System

Synchronization

Video Output

S/N Ratio

Gain Control

White Balance

Sense-Up

IP Rating

Operating Temperature

Power Supply

Power Consumption

Dimensions

Weight

1/3” Sony Super-HAD™ CCD

600 TV Lines

0.00001 Lux

4.3mm Fixed Lens

NTSC=768 x 494 / PAL=752 x 582

Auto: 1/50 SEC, 1/60 SEC~ 1/100,000 SEC

2:1 Interlace

Internal

1.0Vp-p~75 Ohm

>52dB (AGC Off)

Auto

Auto (X32)

IP66

-4 ~ +140° F

12V DC Required

120mA Max.

1.89”(Dia) x 1.46”(H)

0.25 lbs.

Specifications

•

Produktspezifikationen

Marke:	Speco Technologies
Kategorie:	Sicherheitskamera
Modell:	CVC62ILTB
Breite:	48 mm
Tiefe:	48 mm
Gewicht:	113 g
Produktfarbe:	Schwarz
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	37 mm
Befestigungstyp:	Zimmerdecke
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-10 - 50 °C
Eingebauter Ethernet-Anschluss:	Nein
Betriebsanleitung:	Ja
Gehäusematerial:	Aluminium
Energieverbrauch:	120 mA
Analoges Signalformatsystem:	NTSC, PAL
Rauschverhältnis (SNR):	52 dB
Objektivdurchmesser:	4.3 mm
Digitaler Zoom:	32 x
Größe des Bildsensors:	1/3 "
Formfaktor:	Kuppel
Maximale Auflösung:	768 x 494 Pixel
Unterstützung von Positionierung:	Innen & Außen
DC-Ausgang Volt:	+12V
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0.00001 Lux
Sensor-Typ:	CCD
Optischer Zoom:	- x
Verschlusstyp:	Elektronisch
Weißabgleich:	Auto
Nachtsicht:	Ja
Kamera Verschlusszeit:	1/100000 s
Anzahl der TV-Linien:	600
NTSC Auflösung:	768 x 494 Pixel
PAL Auflösung:	752 x 582 Pixel