Soundmaster DISC4020 Bedienungsanleitung

Soundmaster Hi-Fi-Anlage DISC4020

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Soundmaster DISC4020 (7 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
DISC4020 / English Manual
ENG 1
LOCATION OF CONTROLS
MAIN UNIT
1) LCD display
2) Remote sensor
3) Standby LED indicator
4) CD door
5) USB Socket
6) SD/MMC card slot
7) Snooze button
8) Alarm button
9) Stop /St-Mono button
10) Play/Pause button
11) Volume knob
12) On/Standby button
13) Function button
14) Preset EQ button
15) Folder/Pre-Up button
16) Skip/Tuning Up /Down button
17) Memory/Clock-Adjust button
18) Play Mode button
19) FM wire antenna
20) Aux-in jack
21) 3.5mm Headphone jack
22) DC jack
23) AC/DC adaptor
24) DC plug
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other radio devices
Precautions for use
Installation
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
• Do not cover any vents and make sure that there is a sp ound the unit for ventilation. ace of several centimeters ar
Connection
1. Connect the DC plug (24) to the DC jack (22) of the main unit, then plug in the AC/DC adaptor (23) to the AC outlet. The unit
will go to standby mode and the Standby LED indicator (3) will light up.
2. Turn on the unit (12), if the LCD display (1) is on with backlighting, it means the power supply is normal. Now your system is
ready to play the music.
DISC4020 / English Manual
ENG 2
Setting the clock
1. Set unit in standby mode.
2. Press & hold the “ Mem/Clk-Adj ” button (17), display will flash “24HR” press the Skip Up or Skip Down button
(16) to select the clock format between 12 or 24Hour. Then press the “ Mem/Clk-Adj ” button (17).
3. The first digit of “ 0:00 ” is flashing on the LCD display (1). Press Skip Up or Skip Down button (16) to set the
correct hour. Press “ Mem/Clk-Adj ” button (17) to store the correct hour.
4. The third & fourth digit of “ 00 ” is flashing, press the Skip Up or Skip Down button (16) to set the correct minutes.
Then press “ Mem/Clk-Adj ” button (17) to store the correct minute.
¾ The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after
pressing the “ Mem/Clk-Adj ” button.
¾ The pre-set time will be re-set completely if dis-connecting the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
Listening to radio
Manual tuning
1. Switch on the unit by On/Standby button (12), then press Function button (13) to select “ Tuner ” mode.
2. Tune to the required station by pressing the Tuning Up or Down button (16).
3. Press the Volume knob (11) to the desired volume level.
Auto tuning
1. Press Function button (13) to select “ Tuner ” mode.
2. Press and hold the Tuning Up or Down button (16) for 1-2 seconds and then release.
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Press Volume knob (11) to the desired volume level.
Preset stations
You can store up to 10 radio stations in the memory
Set to tuner mode.
1. Turn to the desired radio station by “ Manual” or “ Auto ” tuning method.
2. Press and hold the Mem/Clk-Adj ” button (17) until the “ MEM ” indicator and preset station number are flash on LCD display
(1)
3. Press “ Folder / Pre-up button (15) to select the desired station memory for storage.
4. Press “ Mem/Clk-Adj ” button (17) again to confirm the setting.
5. Repeat step 1 to 4 to store other stations.
6. Now you can select the presets stations in order by pressing the “Folder/Pre–up ” button (17)
¾ The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended to
switch the system into standby mode for convenience usage.
¾ There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode automatically.
¾ You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
z Press the “ St/Mono ” button (9) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In
particular when stereo signals are weak, it is preferable to receive the program in Mono.
z If stereo signal is being received, the stereo indicator “ ” will appear on LCD display (1) to show FM Stereo program
is now receiving.
Hints for best reception:-
- FM : the receiver has a build-in FM wire antenna (19) hanging at the rear cabinet, this wire should be totally unraveled and
extended for the best reception.
DISC4020 / English Manual
ENG 3
Playing Compact Disc
z Getting start
1. Press Function button (13) to select “ CD ” mode.
2. Push the CD door open (4) to open the CD door.
3. Place a CD with the printed side facing out and then close the CD.
4. Focus search will performing and the LCD display (1) will show
the total number of tracks & total playing time. Then, the un
it
will start to automatically.
5. Press Volume knob (11) to the desired volume level.
z Play / Pause mode
1. To interrupt, press the “ Play/Pause ” button (10) once, and the playing time will be freeze on the LCD display (1). Press
again to resume normal playback.
z Stop mode
1. If “ Stop ” button (9) is pressed during play or pause mode, system will go to stop mode.
z Skip mode (skip up / skip down )
1. During play or pause mode, if “ skip up
” button (16) is pressed. It will go to next
track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “ skip down ” button (16) is pressed. It will go to the previous track, original track no. is
display and remain the play or pause mode.
z For MP3 Disc
1. After focus search is performing, the total number of track and album will be shown on the LCD display (1). The unit will start
to plat directly.
2. Press “ Folder/ Pre-Up (15) or Pre-Down ” at remote control to select the folder number.
3. Press “ Skip Up or Skip Down ” button (16) to select the track number.
ID3/Display function (On remote control)
Press the “ ID3 “ button on the remote control repeatedly, the LCD display (1) show “ file - … ”during playback of MP3/WMA file,
the song file/album/song/artist name/clock time is being displayed in sequence . Press the “ ID3 ” button until display show the
running time to disable the function.
Remark:-
- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (1) when press the
ID3 button.
- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
- The system support only English and Arabic number for ID3 function.

Produktspezifikationen

Marke: Soundmaster
Kategorie: Hi-Fi-Anlage
Modell: DISC4020

Brauchst du Hilfe?

Wenn Sie Hilfe mit Soundmaster DISC4020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Hi-Fi-Anlage Soundmaster

Soundmaster

Soundmaster MCD380 Bedienungsanleitung

11 September 2024
Soundmaster

Soundmaster DISC 4011 Bedienungsanleitung

31 August 2024
Soundmaster

Soundmaster DISC 3800 MP-3 Bedienungsanleitung

3 August 2024
Soundmaster

Soundmaster MCD750 Bedienungsanleitung

2 August 2024
Soundmaster

Soundmaster MCD4500 Bedienungsanleitung

28 Juli 2024
Soundmaster

Soundmaster DISC-3110 Bedienungsanleitung

25 Juli 2024
Soundmaster

Soundmaster NR 965 CD Bedienungsanleitung

23 Juli 2024
Soundmaster

Soundmaster MCD 7400USB Bedienungsanleitung

22 Juli 2024
Soundmaster

Soundmaster DISC4400 Bedienungsanleitung

20 Juli 2024
Soundmaster

Soundmaster MCD5550DBR Bedienungsanleitung

17 Juli 2024

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-

Lenco

Lenco MC-129 MP3 Bedienungsanleitung

16 Oktober 2024
Akai

Akai EIE Pro Bedienungsanleitung

14 Oktober 2024
Sennheiser

Sennheiser SZI 1029 Bedienungsanleitung

7 Oktober 2024
Yamaha

Yamaha MusicCast SRT-1500 Bedienungsanleitung

7 Oktober 2024
Kicker

Kicker 46HDTPH Bedienungsanleitung

7 Oktober 2024
Vtech

Vtech V-Kids Bedienungsanleitung

5 Oktober 2024
Hitachi

Hitachi AX-M10E Bedienungsanleitung

5 Oktober 2024
IDance

IDance XD8N Bedienungsanleitung

5 Oktober 2024
LD Systems

LD Systems DAVE 18 G3 Bedienungsanleitung

4 Oktober 2024
Pyle Pro

Pyle Pro PWMA1216BM Bedienungsanleitung

4 Oktober 2024