Skytec SPB-26 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Skytec SPB-26 (16 Seiten) in der Kategorie Lautsprecheranlage. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
GB
Congratulations on the purchase of this SkyTec Karaoke set.
Please read this manual carefully prior to using the unit.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for future reference.
- Keep the packaging for safer transport in its original packaging
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the unit.
- When you unplug the unit from the mains always pull the plug, never the lead.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified
technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit
into a mains outlet.
- Repairs have to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
- Do no place the unit near heat sources.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside
the housing. Please let the unit reach room temperature prior to use.
- To avoid accidents in public premises, the legal requirements must be fulfilled and
instructions/warnings must be adhered to.
- Keep out of the reach of children.
- All volume controls must be set to zero prior to switching the unit on.
- Do not use cleaning sprays for the slider controls. The residues of these spray cause
dust deposits in the controls. If a problem occurs, please consult a specialist.
- Do not clean the unit with chemical solutions. This might damage the finish. Only use a
dry cloth for cleaning.
PARTS DESCRIPTION
Thanks you for choosing our products.
Please take a few moments to read these instructions carefully, as we want you to enjoy your
new products quickly and to the full. The series of amplifier with new design of model and nice
looking, can suit different occasions, especially for office, meeting, exhibition, outside party,
teaching etc. The series is provided with wired, amplifying and amusement; fully embody high
quality, low price, portability and convenience. We believe firmly that the series of amplifier will
become your good assistant and friend because of its advantages.
MAIN FEATURES
ï‚· USB, Card reader support play form: MP3, WMA
SPECIFICATION
Frequency Response: ...................................................... 40Hz-20kHz ± 3dB
Input Sound Source: ...................................................................... Line Input
Speaker: ................................. 8 inch Woofer & 2x Piezo Tweeter (178.438)
.............................................. 10 inch Woofer & 2x Piezo Tweeter (178.440)
............................................... 12 inch Woofer & 3x Piezo Tweeter (178.442)
........................................ 2x 6.5 inch Woofer & 2x Piezo Tweeter (178.444)
........................................... 2x 8 inch Woofer & 2x Piezo Tweeter (178.446)
......................................... 2x 10 inch Woofer & 2x Piezo Tweeter (178.448)
Car reader memory medium: ................................................... USB, SD Card
Power supply: ....................................................................... 230VAC / 50Hz
PANELS:
1. Microphone Input Sockets
2. Microphone volume control
3. Echo control
4. Bass control
5. Treble control
6. Master Volume control
7. MP3 Play/Pause/Track buttons
8. Speaker output
9. Line input
10. Power switch
11. AC power cable
OPERATION:
Connect the passive speaker with a good quality speaker cable to the speaker output connector
(21). WARNING: only connected the original slave speaker on the speaker output terminal!
If required connect an external signal source like a CD-layer to LINE IN.
Connect the device with an electric outlet (230VAC / 50Hz)
It is possible to connect an external antenna to the antenna socket for optimum radio reception.


Produktspezifikationen

Marke: Skytec
Kategorie: Lautsprecheranlage
Modell: SPB-26

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec SPB-26 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecheranlage Skytec

Bedienungsanleitung Lautsprecheranlage

Neueste Bedienungsanleitung für -Kategorien-