Skytec DMX Light Controller Bedienungsanleitung

Skytec DJ Ausrüstung DMX Light Controller

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Skytec DMX Light Controller (20 Seiten) in der Kategorie DJ Ausrüstung. Dieser Bedienungsanleitung war für 44 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
DMX LIGHT CONTROLLER WITH DIMMERS
154.021
Gebruiksaanwijzing
Mode d’Emploi
Gebrauchsanleitung
Brugsanvisning
Instruction Manual
UK
This model is used as either a 4CH. DMX chase controller or a DMX dimmer pack. It has two operating
modes comprised of DMX and MASTER modes, which is corresponding to the receiving and transmitting
functions respectively. In DMX mode, it features 4-channel individual DMX address setting. In MASTER
mode, it is incorporated with 6 operating modes, MANUAL DIMMER, MANUAL PROGRAM, AUTO
PROGRAM, HOLD SOUND, PROG SOUND and AUTO SOUND. In addition, multiple units can be
connected to be used together, one as a DMX dimmer pack and the others as chase controllers. Also,
STAND BY, FULL ON and PREHEAT functions are incorporated with this unit.
Before operating this unit, please read this manual thoroughly. This manual will guide you through all
functions step by step.
SAFETY INTRODUCTION
- This apparatus must be earthed.
- The back-function when power –down is effective in a month. If reuse this unit more than a month later
after last time, reset the system and make a setting again.
- The duration between power-on and power-off must not be less than 1 second. Otherwise, malfunction or
mistake may result.
- If malfunction or mistakes result when using, reset the system for initialization to restart this unit.
- This apparatus is suitable for normal pollution situation..
- Keep the manual for further reference.
- This device is a lighting effect for creating decorative effects. It is only allowed to be operated with a
voltage of 230V, 50Hz and was designed for indoor used only.
- During use, these lamps get very hot. Therefore the light effect must be placed at least 1m away from
inflammable materials such as curtains, books, etc. Make sure that the housing cannot be touched by
accident.
- Any installation, operation and maintenance of this device should be carried out by a qualified person.
- If the device is damaged by transportation, do not use it and consult your dealer.
- Never let the power-cord come into contact with other cables. Handle the power-cord and all
connections with the mains with particular caution.
- The device is not a toy. Keep it away from children.
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the light effect.
- Never plug or unplug the unit with wet hands.
- Disconnect the unit from the mains prior to replacing the fuse.
- If the plug or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside.
- When you unplug the unit from the mains always pull the plug, never the lead.
- The supplied bracket is the main fixing and must be used to solidly mount the light effect.
- In order to avoid accidents in public premises, the local legal requirements and safety
regulations/warnings must be fulfilled.
A. DMX mode
When the DMX indicator is on ( Press “F + SIGNAL SELECT” until DISPLAY shows IN ) shows this unit is
used as DMX dimmer pack.
A.1. BUTTONS 1, 2, 3 and 4
Press any one of these 4 buttons, corresponding indicator will blink, and the DMX address of
corresponding channel will appear in DISPLAY screen. Press UP or DOWN button to select desired
DMX address followed by pressing corresponding channel button, corresponding indicator is off
indicating information of entry is confirmed. Then the information in DISPLAY screen returns to initial
condition.
A.2. UP BUTTON
Press to increase the DMX address with the maximum 512.
This function is not effective when in full letter indication.
A.3. DOWN BUTTON
Press to decrease the DMX address with the maximum 512.
This function is not effective when in full letter indication.
A.4. F + BUTTON ( Press F and buttons at a time )
Press to select L-- or R--.


Produktspezifikationen

Marke: Skytec
Kategorie: DJ Ausrüstung
Modell: DMX Light Controller

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec DMX Light Controller benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung DJ Ausrüstung Skytec

Bedienungsanleitung DJ Ausrüstung

Neueste Bedienungsanleitung für -Kategorien-