SkyRC Quattro Bedienungsanleitung

SkyRC Ladegerät Quattro

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SkyRC Quattro (4 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Thank you for your choice of the SKYRC Quattro Micro Battery Charger. This unit is

simple to use but its operation does require some knowledge on the part of the user.

Please read this entire operating manual completely and attentively before using this

product, as it covers a wide range of information on operating and safety.

SKYRC Quattro Micro Battery Charger employs the circuit that features four totally

independent but identical power outputs which are powered 4W each. It is designed for

charging single cell LiPo. Insert the battery lead to the right connector in each port, the

charger will charge 4 batteries at the same time. And the charging current can be

adjusted from 0.1-1A by dial, the charging capacity and cell voltage can be displayed in

each 4-digital LED Indicators.

INSTRUCTION MANUAL

SK-100079

INTRODUCTION

QUATTRO MICRO BATTERY CHARGER

Micro

Micro Reverse mCPX

4-Digital LED

Indicator

Charging Status

LED Indicator

AC Input

Power Port

100-240V

Rotary Dial

for Setting

Charging Current

Start Stop/

Button

DC Input

Power Jack

11-15V

When using 12V lead acid battery,

When using AC power source

1. Insert the AC power cord into the charger.

2. Insert the AC power cord into a wall socket (100-240V).

3. When the charger is powered on, 4 status LEDs will blink once with one beep and all

4-digital LED Indicators will display 8888. After that, 4 LEDs will extinguish and all 4-

digital LED Indicators will display the charging current which indicates the charger is

ready to charge.

Caution: Each charging port can only charge one kind battery at same time.

Four independent ports can be used at the same time

Four different kinds of battery connectors in each port

Four independent functioning charging circuits

Four independent 4-digital LED displays current and capacity

LED and audible sound indicate charging status

Adjustable charging current from 0.1-1A

AC/DC Dual Power Input

Efficient ventilation

Maximum protection: short circuit protection; over current protection; battery reverse

polarity protection and DC input voltage protection

FEATURES

CHARGE PROCEDURES

Getting Started

Using DC cable

attaching to car

battery

When the charging process is finished, the status LED turn green and blinks 5 times with audible

sound. And the status LED stays green and the 4-digital LED will display “FULL”.

Insert the battery lead to the right battery connector.

Note: Please make sure insert the battery polarities correctly.

Select the charging current (0.1-1A) by rotating the dial.

Press and hold START/STOP button for 3 seconds to start charging process. The related status

LED will turn red with long beep.

During the charging process, the 4 digital LED will display charging capacity, battery voltage and

charging current circularly.

The LED will stay red during the whole charging process.

Press and hold START/STOP button for 3 seconds during charging process to stop charging.

OPERATING

4 DIGITAL LED MESSAGE DISPLAY

Status: Charging process finish.

Charging Current(A)

(0.10-1.00A)

Charging Capacity(mAh)

Note: You are not able to adjust the charging current during charging process.

Charging Capacity(mAh) Battery Voltage(V) Charging Current(A)

At this time, if you press the “START/STOP” button once, the 4-digital LED will display “FULL”, battery voltage

and battery capacity circularly.

Note:

Battery Voltage(V)

Battery Voltage(V) Charging Capacity(mAh)

Produktspezifikationen

Marke:	SkyRC
Kategorie:	Ladegerät
Modell:	Quattro
Breite:	132 mm
Tiefe:	100 mm
Gewicht:	280 g
Produktfarbe:	Black, Blue
Höhe:	50 mm
Eingebautes Display:	Ja
Betriebstemperatur:	0 - 50 °C
Anzahl unterstützter Akkus/Batterien:	4
Ladestrom:	0.10 - 1.00A
Kompatible Akku-/Batterie-Technologien:	Lithium Polymer (LiPo)
Verbindungstyp:	Micro/Micro Reverse/MX/mCPX