Simpson ALWB60827-S Bedienungsanleitung

Simpson Hochdruckreiniger ALWB60827-S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Simpson ALWB60827-S (4 Seiten) in der Kategorie Hochdruckreiniger. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Page 1 of 4 REV B - 3/2023

Part Number 7116967 / English

Disclaimers:

●All information in this guide was based on the latest product information available at the time of its printing.

● This guide may cover more than one machine. The drawings in this guide should be used for reference only. There may be di󰀨erences between your

product and the pictures, drawings, and / or diagrams used in this guide.

●In a continued commitment to improve quality, the manufacturer reserves the right to update, change, and / or improve the product(s) covered in this guide

at any time, without notice, and without incurring any obligation. Therefore, the product(s) this guide covers may di󰀨er slightly than those pictured.

Water Blaster

Pressure Washers

Quick Start Guide

1. This quick start guide is not a replacement for the owner’s manual. Be sure to read the owners

manual before operating the machine for the rst time.

2. Read all the information in the safety section of this document and all related user manuals before

operating the machine.

3. Perform the procedures outlined in this quick start guide before operating the machine.

Notes: Contact Us:

If you have any questions regarding the unpacking,

assembly, or use of your pressure washer, please

have your model number and serial number ready,

then contact customer support at 1-877-362-4271

or email .cservice@fna-group.com

Attempting to start the engine incorrectly or using the

pressure washer incorrectly can result in engine and/

or pressure washer damage, and may cause serious

injury or death. To avoid these hazards, be sure to

read, understand, and follow the steps outlined in

the OPERATING CHECKLIST section of the owner’s

manual before starting the engine and follow all the

guidelines for proper use of the pressure washer.

This product has many parts that move at high

speeds. Moving parts can cause crushing injuries,

broken bones, severe lacerations, and/or traumatic

amputations. To prevent injury, never place ngers,

hands, feet, or other body parts near a running

engine. Never operate this product with covers,

shrouds, or other guards removed. Do not wear

loose-tting clothing, dangling drawstrings, or any

other hanging items that could become entangled in

moving parts while operating. Tie up long hair and

remove jewelry before operating.

The high pressures created by a pressure washer

can cause uid injection injuries, severe lacerations,

amputations, and / or death. To avoid these hazards,

always aim the spray gun and lance in a safe direction

when using a pressure washer and never attempt to

touch a leak in a high-pressure hose or tting.

Gasoline is highly ammable and gasoline vapors are

extremely explosive. Fire and explosions can cause

severe burns and/or death. Keep gasoline away from

ames, sparks, and other ignition sources. Refuel

outdoors in a well-ventilated area with the engine

stopped and cool. Wipe up any spilled gasoline

and allow engine to dry before starting. Keep a re

extinguisher handy while refueling. Do not operate

engine with leaks in the fuel system. Do not store

gasoline near other ammable materials.

Pressure washing with volatile, ammable, or

corrosive liquids could cause pressure washer

damage, re, or explosion resulting in severe injury

and/or death. To avoid these hazards, use only

approved soaps and chemicals, do not attempt to

pressure wash with volatile, ammable, or corrosive

liquids, and NEVER use bleach.

Engine exhaust contains carbon monoxide, an

odorless, colorless, poisonous gas. Running an

engine indoors will kill you in minutes. Never use this

product inside a house, garage, or any other kind of

enclosure even if doors and windows are open. Run

engine outside at least 20 feet (6 meters) away from

windows, doors, and vents. Carefully consider wind

direction and air currents when using this product

outside to avoid breathing in engine exhaust. Always

use a carbon monoxide detector in any occupied

buildings near the running engine.

OPERATION

CHECKLIST MOVING PARTS

INJECTION INJURY

REFUELING

VOLATILE LIQUIDS

TOXIC FUMES

Untrained adults and children can be seriously injured

or killed if allowed to incorrectly operate or play with

running pressure washer. To avoid these hazards, be

sure anyone operating the pressure washer receives

proper instructions, understands safe operation, and

has read the owner’s manual before operating this

product. Do not let children operate the pressure

washer without parental supervision. Keep children

and pets away from the pressure washer while it is

running. Always turn o󰀨 the pressure washer before

leaving the area.

UNTRAINED

OPERATION

Transporting this product in an enclosed space on

a transport vehicle where temperatures can rise

may cause fuel to vaporize and leak. Gasoline is

highly ammable and gasoline vapors are extremely

explosive. Fire and explosions can cause severe

burns and/or death. To avoid these hazards, secure

the pressure washer in a well ventilated area out of

direct sunlight and other heat sources and do not

transport the pressure washer on rough roads unless

the fuel has been drained beforehand.

TRANSPORTATION

Failure to inspect this product before use could result

in product damage, serious injury, and/or death. To

avoid these hazards, inspect the pressure washer

before each use. Check for loose or damaged parts,

signs of oil or fuel leaks, missing guards, plugged

cooling vents, or any other condition that may a󰀨ect

proper operation. Repair or replace all damaged

or defective parts and keep all safety guards in

place and in proper working order before using the

pressure washer.

INSPECT

Safety:

Indicates a potentially hazardous situation which, if not avoided, could result in property damage, serious injury, and/ or death.

Indicates a hazardous situation, which if not avoided, could result in property damage and/or minor to moderate injury.

Indicates information considered important but not directly hazard related.

NOTE: Be sure to read understand the safety information listed below. Each box contains one of three words: WARNING, CAUTION,

or NOTICE each of these words indicates a di󰀨erent level of hazard severity and is followed by information about specic hazards, the

consequences of the hazards, and instructions on how to avoid the hazards. Failure to heed these symbols and the information provided with

them could result in property damage, injury, and/or death.

IMPORTANT!

Page 2 of 4 Part Number 7116967 / English REV B - 3/2023

The low oil sensor (if equipped) will automatically

stop the engine when the oil level falls below the safe

limit. To avoid an unexpected shutdown, check the

oil level regularly, ll to the upper limit, and always

operate engine on a level surface.

LOW OIL SENSOR

The engine is shipped from the factory without oil.

Running the engine without oil will result in severe

engine damage and void the warranty. To avoid

causing engine damage and voiding the warranty, ll

the engine with the recommended oil type.

FILL ENGINE OIL

BEFORE USING

Oil is a major factor in the performance and service

life of any engine. Using an incorrect oil may damage

the engine and void the warranty. To avoid causing

engine damage and voiding the warranty, check and

change oil as required using the correct engine oil.

USE CORRECT

ENGINE OIL

Old gasoline can create deposits that clog fuel

systems causing hard starting and poor performance.

Damage caused by old fuel is not covered by the

warranty. To minimize deposits, avoid old fuel related

performance issues, and prevent costly repair work,

do not use gasoline that is older than 30 days.

OLD GASOLINE

Using gasoline with an alcohol blend greater than

10% (E10) will damage the engine. Damage caused

by using an alcohol blend of 15% (E15), 85% (E85),

or any other alcohol blend higher than 10% (E10) is

not covered under warranty. To avoid engine damage

caused by an alcohol blend that is too high, only use

gasoline containing 10% (E10) alcohol or less.

ALCOHOL BLENDS

Overlling the fuel tank can result in carbon canister

damage (if equipped), poor engine performance, and

void the warranty. To avoid these hazards, do not ll

the fuel tank above the maximum level.

DO NOT OVERFILL

FUEL TANK

It is important to prevent gum deposits from

forming in essential fuel system parts, such as the

carburetor, fuel lter, fuel hose, and fuel tank during

storage. Alcohol-blended fuels (also called gasohol,

ethanol, or methanol) attract moisture, which

leads to separation and formation of acids during

storage. Acidic fuel and gum deposits can damage

the engine’s fuel system while in storage. Damage

caused by the use of old, stale, or contaminated fuel

is not covered under warranty.

GASOLINE STORAGE

Running the pressure washer for more than two

minutes without the spray gun trigger pulled will

overheat the pump and possibly cause damage. The

thermal relief valve will open and spray water to help

cool the pump as it overheats. To avoid overheating

the pump, shut o󰀨 the machine if not being used for

longer than two minutes.

PUMP DAMAGE

Turning o󰀨 the water supply to your pump with the

engine running will damage the pump. Damage

caused by running the pump without water is not

covered under warranty. To avoid this hazard always

turn o󰀨 the engine before shutting o󰀨 the water

supply.

PUMP DAMAGE

Water can damage the pressure washer engine

components if allowed to enter through cooling slots

or other holes. Damage caused by water intrusion

is not covered under warranty. To avoid this hazard,

do not use a pressure washer, garden hose, or any

other sources of running water to clean the pressure

washer engine, and never submerge the pressure

washer engine in any liquids.

CLEANING

The use of fuel system cleaning additives can

damage the engine and fuel systems. Damage

caused by the use of fuel system cleaning additives

is not covered by warranty. To avoid engine and fuel

system damage, do not use any fuel system cleaning

additives.

Using chemical cleaners and/or corrosive liquids

can damage the pressure washer seals and internal

components. Damage caused by chemical cleaners

and corrosive liquids is not covered under warranty.

To avoid these hazards, use only approved cleaning

chemicals, never use bleach, and always run clean

water through the pressure washer after using

cleaning chemicals.

GASOLINE ADDITIVES

CHEMICAL

CLEANERS

Rapid retraction (also known as kickback) of the

engine recoil starter cord will pull your hand and

arm towards the engine faster than you can let go

of the handle resulting in sprains, broken bones,

lacerations, and/or traumatic amputations. Kickback

is caused by damage to the engine crankshaft key,

compression release failure, and/or improper starting

techniques. To avoid kickback follow the appropriate

maintenance schedule and starting instructions listed

in the owner’s manual and have engine repair work

done by an authorized service center.

RAPID RETRACTION

High-pressure spray can damage plants and other

surfaces. To avoid damaging plants, cover them

before spraying near them. To avoid damaging

surfaces. Refer to the Nozzle Selection table in this

document for correct nozzle and test surfaces before

spraying to make sure they are strong enough to

withstand high-pressure spray.

SPRAY DAMAGE

Operating the engine with a high-altitude carburetor

jet kit at an altitude below 5000 feet (1524 meters)

will cause the engine to run too hot. Overheating the

engine could result in serious engine damage. To

avoid this hazard, make sure the correct carburetor

kit is installed and the air/fuel mixture is set correctly

for your altitude.

ALTITUDE

A running engine produces heat. The surfaces of

the engine, other related components, and engine

exhaust gas get hot enough to cause mild to moderate

burns or ignite materials on contact. To avoid burns,

do not touch engine surfaces or exhaust gases while

operating and allow engine to cool completely before

moving, touching, or performing any maintenance.

To avoid a re, keep all ammable materials at least

ve feet away from all sides of this product.

Hot oil can cause serious burns. To prevent getting

burned when changing or checking the engine oil,

use gloves to prevent hot oil from touching skin and

change oil when the engine is warm from use but

not hot.

HOT SURFACES

HOT OIL

Unpacking:

1. Place the shipping carton on a solid, at surface.

2. Carefully cut the top of the carton open.

3. Carefully cut each corner of the carton from top to bottom.

4. Lay each side of the carton at on the ground.

5. Remove everything from the carton.

This product and the engine exhaust can expose you to chemicals which are known to the state of California to cause cancer,

birth defects, or other reproductive harm. For more information on California Proposition 65, go to www.P65Warnings.ca.gov.

CALIFORNIA PROPOSITION 65 WARNING

NOTICE

This appliance is not intended to be used by persons

(including children) with reduced physical, sensory,

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.

Assembly / Connecting Hoses:

A RED shipping plug is in the pump that must be replaced with a BLACK

breather cap. The cap is easy to replace with the following steps:

1. Using a bladed screw driver, remove the RED shipping plug from

the top of the pump.

2. Hand thread the BLACK breather cap into the pump.

3. Snug the cap with your ngers.

1. Add the pump breather cap . (if applicable)

RED Shipping cap

BLACK Breather cap

PUMP PURGING

Running a pressure washer pump without water will

severely damage the pump seals and other internal

components. To avoid this hazard, make sure your

water supply is uninterrupted, provides at least

5 GPM at 20 PSI, and always purge the air your

pressure washer pump before starting the engine.

Refer to the ‘Assembly / Connecting Hoses’ section

of this quick-start guide to learn how to purge the

pump of air.

Anytime the pressure washer may endure freezing

temperatures, remaining water needs to be drained

from the pump, high-pressure hose and spray gun

assembly. Drain the hose, spray gun and pump as

explained in the pressure washer Use and Care

Manual. It is suggested to purge the pump of water

by using Simpson® Pump Guard or equivalent pump

protectant.

FREEZE DAMAGE

NOTICE

2. Hand thread the lance clockwise into the gun.

Be careful not to cross-thread the gun and lance.

Using an adjustable wrench, tighten the lance by

placing the wrench on the ats of the nozzle quick-

connector.

WARNING!

The threads on the lance and gun

coupler can be easily cross threaded resulting in

an improper assembly. An improper assembly of

the gun and lance can result in personal injury. Do

not use if the threads on the gun coupler and or

lance are cross

threaded.

Upper Limit

Lower Limit

10. Remove the fuel cap, ll fuel tank with fresh gasoline,

then replace the fuel cap.

Full NOTE: Fill with engine

o󰀨 and cool. Do not over

ll fuel tank.

9. Make sure the pump

oil level is half way

through the site glass

on the side of the pump.

If the pump oil level is

low, refer to the pump

manual for oil lling

instructions.

Page 3 of 4 REV B - 3/2023

Part Number 7116967 / English

6. Insert the male QC plug on the spray gun

into the female QC connector on the high-

pressure hose.

3. Make sure the inlet screen is

clean, inside the pump inlet, and

has the convex side facing out.

4. Turn on the water supply and run it for 30

seconds to purge any dirt or debris from the supply

hose. Then, turn o󰀨 the water supply and thread

the water supply hose into the pump inlet.

8. Select the correct

nozzle for your

cleaning job per the

nozzle selection chart

in this document and

install it onto the lance

by pulling the quick-

connect coupler back,

inserting the nozzle,

then releasing the

coupler allowing it to

snap back in place.

5. Insert the male quick-connect (QC) plug on the high-

pressure hose into the female QC outlet on the pump.

2. Fill the engine

with the correct

oil per the engine

owner’s manual.

The oil level should

be towards the

high mark on the

dipstick. Replace

the dipstick when

the engine is full.

Fill Engine With Oil:

This pressure washer was shipped from the factory without oil in the engine. Running

the engine without oil will result in severe engine damage and void the warranty. To

avoid these hazards, ll the engine with the recommended oil type before starting.

NOTICE

7. Turn on the water supply, aim the spray gun

in a safe direction, then squeeze and hold the

trigger for at least 30 seconds or until the water

runs steady and all the air is purged from the

pump and hoses. When completed, engage

the trigger lock.

Engine Oil Dipstick

1. Place machine on a level surface then remove the engine

oil dipstick by unscrewing it.

Produktspezifikationen

Marke:	Simpson
Kategorie:	Hochdruckreiniger
Modell:	ALWB60827-S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Simpson ALWB60827-S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Hochdruckreiniger Simpson

Simpson Megashot MS61404S Bedienungsanleitung

5 September 2024

Simpson CM61351 Bedienungsanleitung

3 September 2024

Simpson Pro Series PS61374 Bedienungsanleitung

31 August 2024

Simpson 95000 Bedienungsanleitung

28 August 2024

Simpson Megashot MS61048-S Bedienungsanleitung

25 August 2024

Simpson Megashot MSH3224-S Bedienungsanleitung

25 August 2024

Simpson Megashot MS60773-S Bedienungsanleitung

25 August 2024

Simpson PowerShot PS3425 Bedienungsanleitung

24 August 2024

Simpson Megashot MS61224-S Bedienungsanleitung

24 August 2024

Simpson ALH3225-S Bedienungsanleitung

24 August 2024

Bedienungsanleitung Hochdruckreiniger

Neueste Bedienungsanleitung für -Kategorien-

Nilfisk C 110.3-5 PC X-TRA Bedienungsanleitung

15 Oktober 2024

Meec Tools 009-875 Bedienungsanleitung

15 Oktober 2024

Sun Joe SPX3001-RM Bedienungsanleitung

14 Oktober 2024

Worx WG629.1 Bedienungsanleitung

13 Oktober 2024

Hamron 220-118 Bedienungsanleitung

12 Oktober 2024

Eurom H195 Bedienungsanleitung

11 Oktober 2024

Kranzle 2175 TST Bedienungsanleitung

10 Oktober 2024

Powerplus POWXG9025 Bedienungsanleitung

10 Oktober 2024

Stiga HPS 235 R Bedienungsanleitung

8 Oktober 2024

Hecht 323 Bedienungsanleitung

4 Oktober 2024