Shure SM11 Bedienungsanleitung

Shure Mikrofon SM11

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shure SM11 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 41 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Model SM11 User Guide

Dynamic Lavalier Microphone

27C3077 (Rev. 12)

Printed in U.S.A.

GENERAL

The Shure Model SM11 is a miniature dynamic lavalier

microphone designed for use in television broadcasting (on

camera), for sound reinforcement, in certain radio and motion

picture applications, and similar uses where a small,

professional-quality, microphone is required. The SM11 has an

omnidirectional pickup pattern, and its frequency response is

optimized for lavalier use. The microphone is supplied with a tie

clasp assembly, tie tack assembly, connector belt clip, and

zippered carrying/storage bag. An optional kit for mounting the

SM11 on various musical instruments is available as Shure Model

RK279.

Features

• Frequency response optimized for lavalier use. Acoustically

matches most stand- or desk-mounted microphones

• Small and lightweight for unobtrusive, virtually unseen operation

• Smooth exterior and recessed grille screen minimize clothing

noise

• Rugged aluminum case construction

• Extremely flexible long-life cable

• Two mounting options–tie clasp or tie tack

• Convenient, secure belt clip attaches connector to belt or clothing

SPECIFICATIONS

Type

Dynamic

Frequency Response

50 to 15,000 Hz (see Figure 1)

TYPICAL FREQUENCY RESPONSE

FIGURE 1

Polar Pattern

Omnidirectional

Impedance

Microphone rating impedance is 150 ohms (200 ohms actual)

for connection to microphone inputs rated at 19 to 300 ohms

Output Level (at 1,000 Hz)

Open Circuit Voltage.......... -64 dBV/Pa (0.60 mV)

(1 Pa = 94 dB SPL)

Polarity

Positive pressure on diaphragm produces positive voltage on

pin 2 with respect to pin 3

Hum Pickup

35 dB equivalent SPL in a 1 millioersted field

Cable

Non-detachable, 1.2 m (48 in.), two-conductor, shielded,

plastic-covered

Connector

Professional three-pin audio (XLR).

Case

Aluminum with gray enamel finish

Dimensions

See Figure 2

OVERALL DIMENSIONS

FIGURE 2

14.29 mm

(

in.)

38.1 mm

in.)

CABLE:

1219 mm

(48 in.) 83.5 mm

in.)

Net Weight

7.9 grams (0.28 oz), less cable and connector

CERTIFICATION

Eligible to bear CE Marking. Conforms to European EMC Direc-

tive 89/336/EEC. Meets applicable tests and performance criteria

in European Standard EN55103 (1996) parts 1 and 2, for residen-

tial (E1) and light industrial (E2) environments.

INTERNAL CONNECTIONS

FIGURE 3

INSTALLATION

Tie Clasp Assembly

Insert the SM11 in the tie clasp and anchor the cable as shown

in Figure 4. Affix the clasp to a tie, shirt, or blouse. Note that the

microphone can be swiveled 360 in its holder for left, right, or ver-

tical (“pen clip”) use.

CABLE ANCHORING

FIGURE 4

Tie Tack Assembly

Remove the clutch from the tie tack assembly and insert the tie

tack holder in the tie (or through the tie and shirt if desired). Affix

the clutch to the pin of the tie tack holder. Insert the SM11 in the tie

tack holder.

Connector and Belt Clip

With the SM11 installed in one of the assemblies described

above, insert the connector in the connector belt clip and fasten the

belt clip to the user's belt, waistband or other clothing. Excess mi-

crophone cable can be inserted in the user's pocket or tucked into

the waistband.

ARCHITECTS' SPECIFICATIONS

The microphone shall be a moving–coil (dynamic) type with a

frequency response of 50 to 15,000 Hz. The microphone shall

have an omnidirectional polar characteristic. The microphone shall

be low impedance with a rated impedance of 150 ohms for connec-

tion to microphone inputs rated at 19 to 300 ohms. The microphone

output shall be –64 dB where 0 dB = 1 milliwatt per 10 microbars.

The microphone shall be a lavalier type, and shall be provided

with a 1.2m (48 in.) non–detachable, two–conductor, shielded ca-

ble with a professional, three–pin audio connector designed to

mate with Cannon XL series, Switchcraft A3 (Q.G.) series or equiv-

alent connectors. The microphone shall also be provided with a tie

clasp assembly, tie tack assembly, connector belt clip, and carry-

ing/storage bag.

The overall dimensions of the microphone shall be 33.5 mm

(1 – 5/16 in.) in length and 14.7 mm (9/16 in.) in diameter.

The microphone shall be the Shure Model SM11 or equivalent.

ACCESSORIES AND REPLACEMENT PARTS

The following furnished accessories and replacement parts can

be ordered through your Authorized Shure Professional Products

Dealer or from Shure Incorporated.

Tie Clasp Assembly .................................................RK203TC

Tie Tack Assembly..................................................... 90A2384

Connector Belt Clip................................................. RK200BC

Carrying/Storage Bag ................................................... 26A13

Cartridge........................................................................... R99

Cable .................................................................................C91

Instrument Mounting Kit................................................ RK279

For additional service or parts information, please contact

Shure's Service Department at 1-800-516-2525. Outside the Unit-

ed States, please contact your authorized Shure Service Center.

SHIELD

RED

BLACK

CARTRIDGE CONNECTOR

RED CODED TERMINAL

YELLOW

SHURE Incorporated http://www.shure.com

United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446

Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414

Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Produktspezifikationen

Marke:	Shure
Kategorie:	Mikrofon
Modell:	SM11
Breite:	38.1 mm
Produktfarbe:	Grau
Übertragungstechnik:	Kabelgebunden
Zertifizierung:	CE, 89/336/EEC, EN55103
Typ:	Lavalier-/Aufsteckmikrofon
Kabellänge:	1.2 m
Geräteschnittstelle:	XLR-3
Gehäusematerial:	Aluminium
Mikrofon-Frequenz:	50 - 15000 Hz
Mikrofon-Empfindlichkeit:	-64 dB
Mikrofon-Eingangsimpedanz:	150 Ohm
Ausrichtung des integrierten Mikrofons:	Omnidirektional
Tragetasche:	Ja
Anzahl enthaltener Produkte:	1 Stück(e)
Verpackungsinhalt:	Tie Clasp Assembly RK203TC\nTie Tack Assembly 90A2384\nConnector Belt Clip RK200BC
Durchmesser:	14.29 mm
XLR-Out:	1
Stimmenmagnetspuele Typ:	Dynamisch
Empfindlichkeit (1kHz):	0.6 mV/Pa