Shure MX890 Bedienungsanleitung

Shure Mikrofon MX890

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shure MX890 (4 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

27EN16692 (Rev. 3) Printed in U.S.A.

MX690 MX890

MX890 Wireless Desktop Base

The Shure MX890 desktop base for

MX405, MX410 and MX415 gooseneck

microphones offers cable-free installation

for corporate boardrooms or other ap-

plications requiring flexible microphone

configurations and MX415 miniature

gooseneck microphones are suitable for

boardrooms and other sites where aes-

thetics are important. The MX890 oper-

ates within the 518–937 MHz band and

is compatible with Shure SLX wireless

systems.

MX690

MX890

>25 cm

>150 cm

Receiver

Make sure the receiver is within sight of the transmitter. Do not place

receiver behind a metal barrier or any reflective surface.

Refer to the SLX Wireless System User Guide for more infor-

mation, or visit www.shure.com.

30 m (100 ft)

Power On/Off

1. With the battery door open, press and hold the button ON/OFF

for approximately 2 seconds. Release the button when the LCD

screen illuminates.

2. To turn off the transmitter, press and hold the button ON/OFF

for approximately 2 seconds. Release the button when the LCD

screen is blank. The LEDs on the outside of the microphone will

also go dark.

Note: To power on the transmitter without opening the battery

compartment, press and hold the plastic button on the ON/OFF

battery door for approximately 2 seconds, then release it.

MX890 Connecting Gooseneck

1. Align the pin on the microphone flange with the slot on the desktop

base.

2. Insert the gooseneck into the desktop base and lock it in place by

rotating the gooseneck sleeve clockwise.

Low-Cut Filter

The low-cut filter attenuates frequencies below 150 Hz by 6 dB per

octave.

Filter disabled (as supplied)

Low-cut filter

MX690 Wireless Boundary Microphone

The Shure MX690 microphone offers

cable-free installation for corporate board-

rooms or other applications requiring flex-

ible configurations. The MX690 operates

within the 518–937 MHz band and is com-

patible with Shure SLX wireless systems.

Features

• Sleek, low profile design

• Frequency agile, microprocessor controlled transmitter

• IR link to SLX receiver for automatic frequency synchronization

• Programmable frequency Group/Channel display

• Programmable mute function

• Operates on two AA batteries

• Compatible with all Shure SLX Wireless systems

• MX890 Supports Shure MX405, MX410 and MX415 Mini Gooseneck

Microphones

• Commshield® technology for protection from RF interference

Placement

MX890 Microphone Placement

Place the MX890 no more than 25 cm (1 ft.) from the edge of the table.

Aim the microphone toward the talker and away from loudspeakers and

noise sources. Use one microphone for each talker. Pickup angle with a

cardioid cartridge is 130° at –3 dB. Pickup angle with a supercardioid car-

tridge is 115° at –3 dB.

Note: To minimize RF interference, maintain a distance of at least

0.3 m (1 ft.) between transmitters. In case of interference, increase

the distance between transmitters or change channels.

MX690 Microphone Placement

Place the MX690 within 1.5 m (5 ft.) of a talker. Aim the microphone to-

ward the talkers and away from loudspeakers and noise sources. Use one

microphone for every two talkers. Pickup angle with a cardioid cartridge is

130° at –3 dB.

Note: To minimize RF interference, maintain a distance of at least

0.3 m (1 ft.)

To change between toggle and momentary:

Hold the button and press the button. (Test the microphone PUSH SELECT

to confirm the change.)

Hold

To change between push-to-talk and push-to-mute:

1. Set the button for momentary operation.

2. Hold the button and press the button.SELECT PUSH

Hold

Mute Indicator

MX890

The desktop base illuminates the gooseneck microphone LED to indicate

whether the microphone is active or muted. Refer to the following table:

MX890 Status Indicator

Microphone

Status

MX405 / MX410

Indicator

MX405R / MX410R Light

Ring

Active Green Red

Muted Red/Flashing Green* Off/Flashing*

*To toggle between off and flashing, press and simultaneously.PUSH ON/OFF

MX690

The bi-color LED on the top of the microphone indicates whether the mi-

crophone is active or muted.

The LED can also be set to flash when muted.

MX690 Status Indicator

Display Mode Status Indicator

Steady (as supplied) Active = Green

Muted = Red

Flashing Active = Green

Muted = Flashing Green

Battery

Installation

1. Open the battery compartment as shown.

2. Insert two 1.5 V "AA" batteries. Make sure the +/– terminals are prop-

erly oriented.

Note: Alkaline batteries last up to 8 hours. Rechargeable, carbon-

zinc, and zinc-chloride batteries provide less operating time.

Power Meter

The battery meter on the LCD shows remaining battery life.

Low Power Indicator

Steady Red: Power low. Replace batteries immediately

Pulsing Red: Batteries dead. Transmitter cannot be turned on until

batteries are replaced.

Mute Button

The mute button can be configured for toggle or momentary operation.

Toggle (as supplied)

The button toggles the microphone between active and muted states.PUSH

Note: The microphone always powers up in the active state.

Momentary

There are two types of momentary operation:

Push-to-Mute: The microphone is muted only while the button is pressed

and held.

Push-to-Talk: The microphone is active only while the button is pressed

and held.

Asia, Pacific:

Shure Asia Limited

22/F, 625 King’s Road

North Point, Island East

Hong Kong

Phone: 852-2893-4290

Fax: 852-2893-4055

Email: info@shure.com.hk

United States, Canada, Latin

America, Caribbean:

Shure Incorporated

5800 West Touhy Avenue

Niles, IL 60714-4608 USA

Phone: 847-600-2000

Fax: 847-600-1212 (USA)

Fax: 847-600-6446

Email: info@shure.com

Europe, Middle East, Africa:

Shure Europe GmbH

Jakob-Dieffenbacher-Str. 12,

75031 Eppingen, Germany

Phone: 49-7262-92490

Fax: 49-7262-9249114

Email: info@shure.de

Locking Settings

Press and simultaneously to lock or unlock transmitter set-ON/OFF SELECT

tings. When locked, the current settings cannot be manually changed.

Note: Locking the transmitter settings does not disable IR frequency

synchronization or the High Pass/Low Cut filter.

Logic Mode

To use with a logic enabled receiver, you must perform an automatic sync.

The LCD flashes " " during sync. Once in logic mode, the LCD flashes log

" " when powered up.log

Automatic Frequency Synchronization

1. Power off all transmitters.

2. Begin with the first transmitter. Open the battery cover and power it on.

3. Begin with the first transmitter. Open the battery cover and power it on.

4. Aim the IR sensor at the first receiver IR port. The transmitter should

be no more than 15 cm (6 in.) from the receiver. Press and hold the

receiver button to send group and channel data to the transmitter. SYNC

The red LED on the transmitter will stop flashing when programming is

complete.

5. Power off the first transmitter and repeat the synchronization with each

additional transmitter and receiver pair.

Manual Frequency Synchronization

1. Press and hold the transmitter button until the desired group SELECT

number appears.

2. Press again and release it when the desired channel number SELECT

appears.

Tips for Optimum Performance

• Maintain a direct line of sight between the transmitter and receiver

antennas.

• Avoid placing the transmitter on metal surfaces.

• Avoid placing laptop computers or other obstructions in front of the

microphone during use.

• Only use with a Shure SLX4L wireless receiver.

Troubleshooting

If you encounter difficulty with the SLX Wireless System

• Make sure both the transmitter and the receiver are turned on.

• Replace the battery if the battery LED is red.

• Make sure the Group/Channel settings for each transmitter-receiver

pair are identical.

• Make sure there is an unobstructed line of sight between the

transmitter and receiver.

• If necessary, reposition the receiver or decrease the distance between

transmitter and receiver.

• Remove local sources of RF interference, such as computers or

lighting equipment.

• Remove metal objects within 0.3 m (1 ft.) of the transmitter

Note: Refer to the SLX Wireless System User Guide for complete

troubleshooting procedures.

Frequency Selection

Shure offers wireless systems in a selection of bands that conform to

the different government regulations of specific nations or geographic

regions. These regulations help limit radio frequency (RF) interference

among different wireless devices and prevent interference with local

public communications channels, such as television and emergency

broadcasts.

The system's band and frequency range are identified on the receiver

and transmitter. For example, "H4 518-578 MHz."

For information on bands available in your area, consult your local dealer

or phone Shure. More information is also available at www.shure.com.

LICENSING INFORMATION

Licensing: A ministerial license to operate this equipment may be re-

quired in certain areas. Consult your national authority for possible

requirements. Changes or modifications not expressly approved by

Shure Incorporated could void your authority to operate the equipment.

Licensing of Shure wireless microphone equipment is the user’s respon-

sibility, and licensability depends on the user’s classification and applica-

tion, and on the selected frequency. Shure strongly urges the user to

contact the appropriate telecommunications authority concerning proper

licensing, and before choosing and ordering frequencies.

Certifications

Certified under FCC Part 74.

Certified by IC in Canada under RSS-123 and RSS-102.

FCC: IC: DD4MX890. 616A-MX890.

This product meets the Essential Requirements of all relevant European

directives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from: www.shure.com/

europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: EMEAsupport@shure.de

Produktspezifikationen

Marke:	Shure
Kategorie:	Mikrofon
Modell:	MX890

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shure MX890 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mikrofon Shure

Shure MXA901-R Bedienungsanleitung

6 September 2024

Shure SBC-DC-903 Bedienungsanleitung

3 September 2024

Shure SM7dB Bedienungsanleitung

28 August 2024

Shure SLXD24/SM86 Bedienungsanleitung

20 August 2024

Shure SBC10-904 Bedienungsanleitung

20 August 2024

Shure PG27 Bedienungsanleitung

19 August 2024

Shure TH53 Bedienungsanleitung

19 August 2024

Shure UA834 Bedienungsanleitung

17 August 2024

Shure Microflex Overhead MX202 Bedienungsanleitung

17 August 2024

Shure VP89 Bedienungsanleitung

17 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024

AKG WMS420 Bedienungsanleitung

13 Oktober 2024

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024

AKG CBL201B Bedienungsanleitung

8 Oktober 2024

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024