Shure Beta 98H/C Bedienungsanleitung

Shure Mikrofon Beta 98H/C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shure Beta 98H/C (4 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Microphone électrostatique cardioïde
Micrófono de condensador de cardioide
Nieren-Kondensatormikrofon
Microfono cardioide a condensatore
Кардиоидный конденсаторный микрофон
カーディオイドコンデンサー型マイクロホン
단일지향성 콘덴서 마이크
心形电容话筒
© 201 Shure Incorporated Printed in U.S.A4 .
27A14090 (Rev. 2)
BETA 98H/C
Wired Microphones
BETA 98H/C
Cardioid Condenser Microphone
3
Cardioid Condenser Microphone
General Description
The Beta 98H/C miniature cardioid condenser micro-
phone clamps onto the bell of wind instruments or onto
the rim of percussion instruments. The integrated goose-
neck and ratcheting swivel joint allows the mic to be
easily positioned and secured, and an isolation shock-
mount reduces the transmission of instrument vibrations.
A gooseneck angle brace is included to provide better
retention of the desired microphone placement.
Featuring a highly consistent cardioid polar pattern, the
Beta 98H/C provides high gain before feedback and
smooth off-axis rejection. It's ability to handle extremely
high sound presure levels (SPL) makes it ideal for live
sound reinforcement on a variety of instruments.
Features
• Premier live performance microphone with Shure
quality, ruggedness, and reliability
• Uniform cardioid pick-up pattern for maximum gain
before feedback and excellent rejection of off-axis
sound
• Tailored frequency response specifically shaped for
open, natural sound reproduction
• Wide dynamic range for use in high sound pressure
level SPL environments
• Adjustable gooseneck, angle brace and ratcheting
swivel joint allow for optimal microphone positioning
• Compact, lightweight construction provide a low
degree of visibility
• Interchangeable microphone cartridges with different
polar patterns are available
• Snap-fit foam windscreens stay in place, minimizing
wind noise
General Rules for Use
• Do not cover any part of the microphone grille with
your hand, as this will adversely affect microphone
performance.
• Aim the microphone toward the desired sound source
(such as the talker, singer, or instrument) and away
from unwanted sources.
• Place the microphone as close as practical to the
desired sound source.
• Work close to the microphone for extra bass
response.
• For better gain before feedback, use fewer
microphones.
• Keep the distance between microphones at least
three times the distance from each microphone to its
source ("three to one rule").
• Place microphones as far as possible from reflective
surfaces.
• Add a windscreen when using the microphone
outdoors.
• Avoid excessive handling to minimize pickup of
mechanical noise and vibration.
Applications And Placement
The following table lists the most common applications and placement techniques. Keep in mind that microphone
technique is largely a matter of personal taste; there is no one "correct" microphone position.
APPLICATION SUGGESTED MICROPHONE PLACEMENT TONE QUALITY
Reed Instruments Place microphone a few inches from and aiming
into bell.
Bright, minimizes feedback and
leakage.
Brass & Woodwinds Brass: 30 to 90 cm (1 to 3 ft.) away, on-axis with
bell of instrument.
Bright, clear sound.
Woodwinds: 2.5 to 15 cm (1 to 6 in.) away, on-
axis with bell of instrument.
Bright, clear sound.
Bell of instrument 90° off-axis from front of mic. Softer, mellow sound.
Avoiding Pickup of Unwanted
Sound Sources
A cardioid microphone has the greatest sound rejection
at the rear of the microphone. Place the microphone
so that unwanted sound sources, such as monitors
and loudspeakers, are directly behind it. To minimize
feedback and ensure optimum rejection of unwanted
sound, always test microphone placement before a
performance.
BETA 98H/C
MONITOR
P.A.
LOUDSPEAKER
RECOMMENDED LOUDSPEAKER LOCATIONS FOR
CARDIOID MICROPHONES
Power Requirements
This microphone requires phantom power and performs
best with a 48 Vdc supply (IEC-61938). However, it will
operate with slightly decreased headroom and sensitivity
with supplies as low as 11 Vdc.
Most modern mixers provide phantom power. You must
use a microphone cable: XLR-to-XLR or balanced
XLR-to-TRS.
4
Type Electret Condenser
Frequency Response 20 to 20,000 Hz
Polar Pattern Cardioid
Output Impedance 150Ω
Sensitivity
(at 1 kHz, open circuit
voltage)
−56dBV/Pa(1.6mV)
1 Pascal=94 dB SPL
Maximum SPL
(1kHzat1%THD,1kΩ
load)
155 dB SPL (typical)
Equivalent Output
Noise
(A-weighted)
31 dB SPL (typical)
Signal-to-Noise Ratio
(referenced at 94 dB
SPL at 1 kHz)
63 dB
S/N ratio is difference between 94 dB SPL and equivalent SPL of
self noise, A-weighted
Dynamic Range
(at1kHz,1kΩload)
124 dB
132 dB
Preamplifier Output
Clipping Level
(1% THD)
3 dBV (1.4 V)
Polarity Positive pressure on diaphragm produces positive volt-
age on pin 2 with respect to pin 3
Power Requirements 11 to 52 Vdc phantom
Accessories and Parts
Furnished Accessories
Zippered Carrying Bag 95A2398
In-Line Preamplifier (1 piece) RPM626
CERTIFICATION
Eligible to bear CE Marking. Conforms to European EMC Directive 2004/108/EC.
Meets Harmonized Standards EN55103-1:1996 and EN55103-2:1996, for residential
(E1) and light industrial (E2) environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49 7262 92490
Fax: +49 7262 9249114
Email: info@shure.de
Optional Accessories
Supercardioid cartridge RPM110
Metal Locking Windscreen A412MWS
Replacement Parts
Snap-Fit Windscreen (4 per package) RK183WS
Cardioid cartridge RPM108
Clamp Assembly (A98D) RPM618
125 Hz
250 Hz
500 Hz
1000 Hz
5000 Hz
10000 Hz
SPECIFICATIONS
Red (to drain) (DC bias)
12
3
2
3
1
CARTRIDGE
PREAMP
XLR CONNECTOR
RC
FILTER
FET
G
D
S
MIC
ELEMENT Black (to source) (audio)
Shield
Wiring Diagram
Proximity Effect
Directional microphones progressively boost bass frequencies as the microphone is
placed in closer proximity to the source. This phenomenon, known as proximity effect,
can be used to create a warmer, more powerful sound.

Produktspezifikationen

Marke: Shure
Kategorie: Mikrofon
Modell: Beta 98H/C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shure Beta 98H/C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon Shure

Shure

Shure MXA901-R Bedienungsanleitung

6 September 2024
Shure

Shure SBC-DC-903 Bedienungsanleitung

3 September 2024
Shure

Shure SM7dB Bedienungsanleitung

28 August 2024
Shure

Shure SLXD24/SM86 Bedienungsanleitung

20 August 2024
Shure

Shure SBC10-904 Bedienungsanleitung

20 August 2024
Shure

Shure PG27 Bedienungsanleitung

19 August 2024
Shure

Shure TH53 Bedienungsanleitung

19 August 2024
Shure

Shure UA834 Bedienungsanleitung

17 August 2024
Shure

Shure Microflex Overhead MX202 Bedienungsanleitung

17 August 2024
Shure

Shure VP89 Bedienungsanleitung

17 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024