Shimano PD-M424 Bedienungsanleitung
Shimano
Fahrradzubehör
PD-M424
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shimano PD-M424 (1 Seiten) in der Kategorie Fahrradzubehör. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
12
R
12
15
R
SM-SH51
SM-SH51
SM-SH51
R
R
SI-41L0G-001
PD-M545
PD-M424
SPD Pedals
Technical Service Instructions
3 mm Allen key
Adjustment bolt
Tension indicator
DecreaseIncrease
Tightening torque:
5 – 6 N·m {43 – 52 in. lbs.}
Releasing the cleats from the pedals
The waterproof seal is supplied with Shimano shoes which
require this step to be carried out.
Note:
Attaching the cleats
With a pair of pliers or a similar tool, pull off the rubber cover to
expose the cleat mounting holes.
Remove the sockliner and position a cleat nut over the oval holes.
Waterproof seal
Remove the sockliner and attach the waterproof seal.
When the bolt is turned clockwise, the spring tension increases and the
red part of the tension indicator becomes larger. When the bolt is turned
all the way clockwise, it will suddenly become hard to turn. Do not turn
the bolt beyond this point. When the bolt is turned counterclockwise,
the spring tension decreases and the red part of the tension indicator
becomes smaller. Once the red part of the tension indicator can no
longer be seen, do not turn the bolt counterclockwise any further.
Mounting the reflectors (optional)
An optional reflector set (SM-PD40) is available. Please contact a
professional dealer for details.
Cleat replacement
Cleats wear out over time and should be replaced periodically. Cleats
should be replaced when it becomes difficult to release, or it starts to
release with much less effort than the when it was in new condition.
Adjusting the cleat position
The cleat has an adjustment range of 20 mm front to
back and 5 mm right to left.
After provisionally tightening the cleat, practice
engaging and releasing, one shoe at a time.
Readjust to determine the best cleat position.
After you have determined the best cleat position,
firmly tighten the cleat mounting bolts with a 4 mm
Allen key.
3.
1.
2.
1.
2.
From the bottom of the shoe, position a cleat and then a cleat
adapter over the cleat holes. The cleats are compatible with both
left and right pedals. Provisionally tighten the cleat mounting bolts.
Provisional tightening torque
for cleat mounting bolts:
2.5 N·m {22 in. lbs.}
Position the triangular
portion of the cleat toward
the front of the shoe.
Front
Note:
In order to prevent accidental release from occurring, make
sure all the spring tensions are properly adjusted.
The spring tensions should be adjusted equally on both sides
of each pedal and for both right and left pedals. If they are not
adjusted equally, it can cause the rider difficulty to engage or
release from the pedals.
If the adjustment bolt is completely withdrawn from the spring
plate, disassembly and reassembly will be required. If this
occurs, ask a professional dealer for assistance.
The method of release varies according to the type of cleats you are using.
(Check the model number and color of your cleats to determine the proper method of release.)
In multiple release mode, it is
necessary to practice releasing
until you become accustomed to
the technique. Releasing by
lifting your heel requires
particular practice.
Note:
It is necessary to practice
releasing until you become
accustomed to the technique.
Note:
Release the cleats from the pedals by twisting
your heels .outward
Release the cleats from the pedals by twisting
your heels in any direction.
The cleats can be released by twisting in any direction.
Because the cleats can also be released by lifting your heel, they
may become accidentally released when applying upward force on
the pedals.
These cleats should not be used for riding style which may involve
pulling up on the pedals or for activities, such as jumping, in which
pulling forces are applied to the pedals causing possible release
from the pedals.
Although the cleats can be released by twisting your heels in any
direction or by lifting, they will not necessarily release if you lose
your balance.
Accordingly, for places and conditions where it looks as though you
may lose balance, make sure that you have sufficient time to release
the cleats beforehand.
If the cleats release by accident, you may fall off the bicycle and
serious injury may result.
If the features of multiple release mode cleats are not sufficiently
understood and if they are not used correctly, then they may release
accidentally with a greater frequency than for single release mode
cleats.
You can help to prevent this by adjusting the amount of force
required to release the cleats in any direction, and you should
practice until you are accustomed to the amount of force and the
angle required to release.
You are able to apply upward force to the pedal, since they will not
release unless the foot is twisted outward.
The cleats will not necessarily release if you lose your balance.
Accordingly, for places and conditions where it looks as though you
may lose balance, make sure that you have sufficient time to release
the cleats beforehand.
When you are pedaling vigorously, your heel may inadvertently twist
outward and this may cause the cleat to release accidentally. If the
cleat releases by accident, you may fall off the bicycle and serious
injury may result.
You can help to prevent this by adjusting the amount of force
required to release the cleats, and you should practice until you are
accustomed to the amount of force and the angle required to release
the cleats.
These cleats only release when the heel is twisted . outward
They will not release if the heel is twisted in any other direction.
SM-SH51 (black)
SM-SH52 (black)
Single release mode cleats:
SM-SH55 (silver/Optional accessory)
SM-SH56 (silver, gold/Optional accessory)
Multiple release mode cleats:
Single release mode Multiple release mode
Rubber cover for cleat
mounting holes
SPD shoe
Cleat mounting bolts
Cleat adapter
Waterproof seal
Cleat Sockliner
The spring force is adjusted by means of adjustment bolts. The
adjustment bolts are located behind each of the bindings, and there
are two adjustment bolts on each pedal. Equalize the tensions by
referring to the tension indicators and by counting the number of turns
of the adjustment bolts. The spring tension can be adjusted in three
steps for each turn of the adjustment bolt.
This step may not be necessary depending on the type of
shoes.
Note:
This step may not be necessary depending on the type of
shoes.
Note:
Cleat types and using the pedals
4 mm Allen key
NOTE:
BE SURE TO READ AND FOLLOW THE ABOVE WARNINGS
CAREFULLY.
If the warnings are not followed, your shoes may not come
out of the pedals when you intend or they may come out
unexpectedly or accidentally, and severe injury may result.
Before riding the bicycle, check that there is no play or looseness
in the connection. Also, be sure to retighten the crank arms and
pedals at periodic intervals.
In addition, if pedaling performance does not feel normal, check
this once more.
Parts are not guaranteed against natural wear or deterioration
resulting from normal use.
For maximum performance we highly recommend Shimano
lubricants and maintenance products.
General Safety Information
SPD pedals are designed so that you release them only when
you intend to release. They are not designed to release
automatically at times such as when falling off the bicycle. This
is a safety measure to prevent you from losing balance and
falling off the bicycle as a result of your feet becoming
accidentally released from the pedals.
Use only SPD shoes with this product. Other types of shoes
may not release from the pedals, or may release unexpectedly.
Use only Shimano cleats (SM-SH51/ SM-SH52 / SM-SH55 / SM-
SH56) and tighten the mounting bolts securely to the shoes.
Before attempting to ride with these pedals and shoes, make
sure you understand the operation of the engagement / release
mechanism for the pedals and cleats (shoes).
Before you attempt to ride with these pedals and shoes, apply
the brakes, then place one foot on the ground and practice
engaging and releasing each shoe from its pedal until you can
do so naturally and with minimal effort.
Ride on level ground first until you become adept at engaging
and releasing your shoes from the pedals.
Before riding, adjust the spring tension of the pedals to your
liking.
When riding at low speed or when there is a possibility that you
might need to stop riding, (for example, when doing a U-turn,
nearing an intersection, riding uphill or turning a blind curve),
release your shoes from the pedal beforehand so that you can
quickly put your feet onto the ground at any time.
Use a lighter spring tension for attaching the pedal cleats when
riding in adverse conditions.
Keep cleats and bindings clear of dirt and debris to ensure
engagement and release.
Remember to check the cleats periodically for wear. When the
cleats are worn, replace them. Always check the spring tension
after replacing the pedal cleats and before riding. If you do not
maintain both your shoes and cleats in good condition, release
and engagement to the pedals could become unpredictable or
difficult, which could result in severe injury.
Be sure to attach reflectors to the bicycle when riding at night.
Do not continue riding the bicycle if the reflectors are dirty or
damaged, otherwise it becomes more difficult for oncoming
vehicles to see you.
Obtain and read the service instructions carefully prior to
installing the parts. Loose, worn, or damaged parts may cause
serious injury to the rider. We strongly recommend only using
genuine Shimano replacement parts.
If you have any questions concerning your pedals, contact a
professional dealer.
Read these Technical Service Instructions carefully, and keep
them in a safe place for later reference.
WARNING
– To avoid serious injuries:
WARNING TO PARENT/GUARDIAN
USE OF THIS PRODUCT IN ACCORDANCE WITH THESE SERVICE
INSTRUCTIONS IS ESSENTIAL FOR YOUR CHILD'S SAFETY.
MAKE SURE YOU AND YOUR CHILD UNDERSTAND THESE
SERVICE INSTRUCTIONS. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.
– To avoid serious injuries:
Engaging the cleats with the pedals
Press the cleats into the pedals with a forward and downward
motion.
Do not use the pedals and cleats in any way other than
as described in these Service Instructions. The cleats
are designed to engage and release from the pedals
when the cleats and pedals are facing forward.
See below for instructions on how to install the cleats.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN SERIOUS PERSONAL INJURY.
Single release mode cleats (SM-SH51/ SM-SH52) and
multiple release mode cleats (SM-SH55 / SM-SH56) are
available for use with these pedals.
Each type of cleat has its own distinctive features, so
be sure to read the Service Instructions carefully and
select whichever type of cleat best suits your riding
style and the terrain and riding conditions which you
will encounter.
WARNING
Maintenance of the axle units
If you experience any trouble with the rotating parts of the pedal, the
pedal may require adjustment. Obtain advice from a professional dealer.
Adjusting the spring tension of the binding
Tightening torque:
35 – 55 N·m {304 – 477 in. lbs.}
Sockliner
Please note: Specifications are subject to change for improvement without notice. (English)
Use a 15 mm spanner to mount the pedals on the crank arms. The right
pedal has a right-hand thread; the left pedal has a left-hand thread.
Pay attention to
the mark
R: right pedal
L: left pedal
Mounting the pedals on the crank arms
Cleat nut
15 mm spanner
Dec. 2008 by Shimano Inc. PIT. IZM. Printed in Malaysia
C
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai, Osaka 590-8577, Japan
A 6 mm Allen key cannot provide a sufficient tightening
torque. Always be sure to use a 15 mm spanner.
Note:
Produktspezifikationen
| Marke: | Shimano |
| Kategorie: | Fahrradzubehör |
| Modell: | PD-M424 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Shimano PD-M424 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fahrradzubehör Shimano
8 Oktober 2024
30 September 2024
21 September 2024
20 September 2024
16 September 2024
15 September 2024
11 September 2024
8 September 2024
7 September 2024
2 September 2024
Bedienungsanleitung Fahrradzubehör
- Fahrradzubehör Crivit
- Fahrradzubehör Nedis
- Fahrradzubehör SKS
- Fahrradzubehör Thule
- Fahrradzubehör Powerfix
- Fahrradzubehör Hema
- Fahrradzubehör Vaude
- Fahrradzubehör Abus
- Fahrradzubehör Fiamma
- Fahrradzubehör Stanley
- Fahrradzubehör Garmin
- Fahrradzubehör SBS
- Fahrradzubehör Master Lock
- Fahrradzubehör Silverline
- Fahrradzubehör Evoc
- Fahrradzubehör EUFAB
- Fahrradzubehör Trelock
- Fahrradzubehör Prophete
- Fahrradzubehör Kayoba
- Fahrradzubehör Bobike
- Fahrradzubehör Topeak
- Fahrradzubehör AXA
- Fahrradzubehör Tacx
- Fahrradzubehör Spokey
- Fahrradzubehör DNT
- Fahrradzubehör Blackburn
- Fahrradzubehör Lezyne
- Fahrradzubehör Security Plus
- Fahrradzubehör Ergon
- Fahrradzubehör Stoy
- Fahrradzubehör Giant
- Fahrradzubehör Knog
- Fahrradzubehör MET Helmets
- Fahrradzubehör OnGuard
- Fahrradzubehör Valk
- Fahrradzubehör Park Tool
- Fahrradzubehör Kemo
- Fahrradzubehör KLICKfix
- Fahrradzubehör Basil
- Fahrradzubehör IXS
- Fahrradzubehör MOTO
- Fahrradzubehör AARON
- Fahrradzubehör Pletscher
- Fahrradzubehör Funn
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
27 September 2024
15 September 2024
15 September 2024
14 September 2024
6 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024