Sharp XLHF202PHBK Bedienungsanleitung

Sharp Hi-Fi-Anlage XLHF202PHBK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp XLHF202PHBK (2 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

MODEL

XL-HF202PH(S)

XL-HF202PH(BK)

XL-HF302PH(T)

HI FI COMPONENT SYSTEM

This Quick Start Guide will help you to correctly install and operate your system.

1 Accessories

3 System connections

2Remote control battery installation

Use “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).

1 Open the battery cover.

2 Insert the batteries as shown.

3 Close the cover.

13H R MW 1

TINSEA452AWZZ

If you require any advice or assistance regarding

your Sharp product, please visit our web-site

www.sharp.co.uk/support

Customers without internet access may telephone

0845 880 0512 during office hours (or (01) 676 0648

if telephoning from Ireland).

Remote control x 1

RRMCGA334AWZZ

“AA” size battery

(UM/SUM-3, R6, HP-7

or similar) x 1

Stand for iPad x 1

NFC tag x 2

Speaker wires x 2

(for XL-HF202PH(S) /

XL-HF202PH(BK))

Speaker wires x 2

(for XL-HF302PH(T)) FM aerial x 1

Velcro tape

(hook type) x 2

Velcro tape

(loop type) x 3

Wall socket

(AC 220 - 240 V ~ 50/60 Hz)

To TV audio

output socket

aerial

Left

speaker

Right

speaker

Red

To LINE

input

socket To audio input

socket

Audio cable

(not supplied)

Commercially

available

Subwoofer

(Ampliﬁ er

Built-In)

4 Turn on your system

5Bluetooth one touch connection via NFC

6Listening on AndroidTM devices

Press the ON/STAND-BY button to turn the power on.

Keep all small parts away from children as they may be

accidentally swallowed.

The NFC tags can be placed anywhere convenient to you. The

velcro tapes supplied will help to secure the tags onto the desired

location.

This audio system supports NFC-enabled device with Android 4.1,

Jelly Bean and higher.

Make sure that the NFC tag is placed on a ﬂat and level surface.

If you choose not to use the velcro tape, do not place the

NFC tag near metal surface to avoid connection interference

during tagging.

Peel the separator off the velcro tape (loop type) and stick it on a

desired surface.

Peel the separator off the velcro tape (hook type) and stick it to

the rear of the NFC tag. Then place the tag onto the desired

location.

NFC tag set up Your device (smartphone / tablet) has an NFC function.

NFC function on your device is turned on.

Screen lock function of the device is off.

This unit is not in Eco mode.

A pop-up window asking whether to proceed

with the Bluetooth connection appears on

the device. Select <YES>.

The ‘connected’ message appears when

the connection is complete.

Playback will start automatically. Otherwise, press play (on

remote control or source device).

Sound will be heard from the speakers of this unit via audio

streaming.

Your device and NFC tag must be within 10 meters from the

unit.

Press the ON/STAND-BY button to turn the power on.

Press the USB button (remote control) or FUNCTION button

repeatedly (main unit) to select USB function.

Connect the device (Smartphone/Tablet) to the unit.

Press the play button (on main unit, remote control or device).

Quit the application (apps).

Disconnect the device from the USB terminal.

To listen to audio via connectivity without NFC tag - Bluetooth

refer “Pairing with other source devicesBluetooth ” on page 8

of the operation manual.

To disconnect, simply touch your device to the tag again.

Touch your device to the supplied NFC tag.

NFC connection for audio playback

Android device playback

To disconnect the Android device

NFC tag

Bluetooth operation buttons (remote control only)

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.

Press the button to skip down.

Press and hold to fast reverse.

Caution :

Insert the connector to the device.

Connect the device to the main unit via USB connector.

separator

velcro tape

(loop type)

separator

rear view of the NFC tag

velcro tape

(hook type)

Check that :

Note :

Connector

Device

(Smartphone/Tablet)

USB connector

(not supplied)

Produktspezifikationen

Marke:	Sharp
Kategorie:	Hi-Fi-Anlage
Modell:	XLHF202PHBK
Display-Typ:	LED
Unterstützte Audioformate:	MP3, WMA
USB Anschluss:	Ja
Bluetooth:	Ja
Nahfeldkommunikation (NFC):	Ja
Kopfhörer-Anschluss:	3,5 mm
Breite:	335 mm
Tiefe:	215 mm
Gewicht:	2600 g
Produktfarbe:	Schwarz
Impedanz:	75 Ohm
Höhe:	96 mm
Energiequelle:	AC
Unterstützte Bänder:	AM, FM
Digitales UKW-Radio:	87.5 - 108 MHz
Anzahl voreingestellter Stationen:	40
Radio Data System (RDS):	Ja
RMS-Leistung:	66 W
Equalizer:	Ja
Sleep-Timer:	Ja
Kopfhörerausgänge:	1
AUX-Eingang:	Ja
Anzahl USB 2.0 Anschlüsse:	1
Playback MP3:	Ja
Lautstärkeregler:	Drehregler
Fernbedienung enthalten:	Ja
Eingebauter Ethernet-Anschluss:	Nein
Stromverbrauch (Standardbetrieb):	40 W
Typ:	Home-Audio-Minisystem
Betriebsanleitung:	Ja
Anzahl der Lautsprecher:	2
Stromverbrauch (Standby):	0.4 W
LED-Anzeigen:	Ja
Integrierte Uhr:	Ja
Rauschverhältnis (SNR):	90 dB
Integrierter Kartenleser:	Nein
Unterstützte Medien:	CD, CD-R, CD-RW
AM-Bandbereich:	522 - 1620 kHz
Eingangsspannung:	230 V
Subwoofer enthalten:	Ja
Eingangsfrequenz:	50 Hz
Bass-Justage:	Ja
Apple-Docking-Kompatibilität:	iPad, iPhone, iPod
Subwoofer Effektivwert Energie:	100 W
Lautsprechertyp:	2-Wege
Kassettendeck:	Nein
CD-Spieler:	Ja
Musik Energie:	200 W
Anzahl an optischen Scheiben:	1 Disks
Optical-Disc-Player:	Ja
Treble Justage:	Ja
Breite des Front-Lautsprechers:	148 mm
Tiefe des Front-Lautsprechers:	203.5 mm
Höhe des Front-Lautsprechers:	262 mm
Frontlautsprechergewicht:	2540 g
Eingang:	1
Anzahl von Lautsprecherausgängen:	2