Sharp PN-VC651B Bedienungsanleitung

Sharp Monitor PN-VC651B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp PN-VC651B (25 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/25

Disposal of Old Equipment and Baeries Only for European Union and countries with recycling systems

The above mark is in compliance with the Waste Electrical and Electronic Equipment

Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the

equipment including any spent or discarded batteries as unsorted municipal waste, but use

the return and collection systems available. If the batteries or accumulators included with

this equipment display the chemical symbol Hg, Cd, or Pb, then it means that

the battery has a heavy metal content of more than 0.0005% Mercury, or more than

0.002% Cadmium or more than, 0.004% Lead.

Note for the battery symbol (bottom symbol): This symbol might be used in

combination with a chemical symbol. In this case it complies with the requirement set by

the Directive for the chemical involved.

IMPORTANT INFORMATION

WARNING : REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO TO

RAIN OR MOISTURE.

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE : Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markins identifying the terminals in your plug proceed as follows.

 The wire witch is coloured GREEN-AND-YELLOW must be connected to the terminal in the

plug which is marked by the letter or by the safety earth or coloured green or green-and-E

yellow.

 The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter or coloured black. N

 The wire which is coloured BROWN must be connected to the terminal which is marked with

the letter or coloured red. L

Ensured that your equipment is connected correctly. If you are in any doubt consult a qualified

electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED”

The lightning ﬂash with arrowhead

symbol, within a triangle, is intended to

alert the user to the presence of

uninsulated “dangerous voltage” within

the product’s enclosure that may be of

suﬃcient magnitude to constitute a risk

of electric shock to persons. The

exclamation point within a triangle is

intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the product.

WARNING:

FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly approved

by the manufacturer could void the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

DEAR SHARP CUSTOMER

Thank you for your purchase of a SHARP interactive monitor. To ensure safety and many years of trouble-free

operation of your product, please read the Safety Precautions carefully before using this product.

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if

improperly handled. This product has been engineered and manufactured with the highest priority on safety.

However, improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please

observe the following instructions when installing, operating and cleaning the product. To ensure your safety and

prolong the service life of your LCD product, please read the following precautions carefully before using the

product.

1. Read instructions All operating instructions must be read and understood before the product is —

operated.

2. Keep this manual in a safe place These safety and operating instructions must be kept in a safe place —

for future reference.

3. Observe warnings All warnings on the product and in the instructions must be observed closely. —

4. Follow instructions All operating instructions must be followed. —

5. Cleaning Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to —

clean the product. Do not use liquid cleaners or aerosol cleaners.

6. Attachments Do not use attachments not recommended by the manufacturer. Use of inadequate —

attachments can result in accidents.

7. Water and moisture Do not use the product near water. Do not install the product in a place where —

water may splash onto it. Be careful of equipment which drains water such as an air-conditioner.

8. Ventilation The vents and other openings in the cabinet are designed for ventilation. Do not cover or —

block these vents and openings since insuﬃcient ventilation can cause overheating and/or shorten the

life of the product. Do not place the product on a sofa, rug or other similar surface, since they can block

ventilation openings. Do not place the product in an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instructions are followed.

9. Power cord protection The power cords must be routed properly to prevent people from stepping on —

them or objects from resting on them.

10. The LCD panel used in this product is made of glass. Therefore, it can break when the product is

dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD

panel breaks.

11. Overloading Do not overload AC outlets or extension cords. Overloading can cause ﬁre or electric —

shock.

12. Entering of objects and liquids Never insert an object into the product through vents or openings. High —

voltage ﬂows in the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

13. Servicing Do not attempt to service the product yourself. Removing covers can expose you to high —

voltage and other dangerous conditions. Request a qualiﬁed service person to perform servicing.

14. Repair If any of the following conditions occurs, unplug the power cord from the AC outlet, and —

request a qualiﬁed service person to perform repairs.

- When the power cord or plug is damaged.

- When a liquid was spilled on the product or when objects have fallen into the product.

- When the product has been exposed to rain or water.

- When the product does not operate properly as described in the operating instructions.

- Do not touch the controls other than those described in the operating instructions. Improper adjustment

of controls not described in the instructions can cause damage, which often requires extensive

adjustment work by a qualiﬁed technician.

- When the product has been dropped or damaged.

- When the product displays an abnormal condition. Any noticeable abnormality in the product indicates

that the product needs servicing.

Produktspezifikationen

Marke:	Sharp
Kategorie:	Monitor
Modell:	PN-VC651B
Touchscreen:	Ja
Bildschirmdiagonale:	65 "
Bildschirmtechnologie:	LCD
Anzahl der Farben des Displays:	1,073 Milliarden Farben
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Breite:	1562.1 mm
Tiefe:	93.2 mm
Gewicht:	51150 g
Produktfarbe:	Schwarz
Höhe:	959.6 mm
RMS-Leistung:	30 W
Anzahl eingebauter Lautsprecher:	2
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Plug & Play:	Ja
HD-Typ:	Full HD
Natives Seitenverhältnis:	16:9
Bildschirmdiagonale (cm):	163.9 cm
Helligkeit:	360 cd/m²
Reaktionszeit:	8 ms
Kontrastverhältnis:	4000:1
Anzahl HDMI-Anschlüsse:	1
Stromverbrauch (Standby):	1 W
Unterstützt Windows-Betriebssysteme:	Ja
PC Audio-Eingang:	Ja
HDCP:	Ja
VESA-Halterung:	Ja
Unterstützte Video-Modi:	1080p
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
LED-Hintergrundbeleuchtungstyp:	Edge-Lit LED
DVI Anschluss:	Nein
Panel-Montage-Schnittstelle:	400 x 400 mm
Produktdesign:	Digital Signage Flachbildschirm
Anzahl der Farben:	1,073 Milliarden Farben
Quecksilbergehalt:	0 mg
VGA (D-Sub)-Eingangsanschlüsse:	1
Anzahl der gleichzeitigen Touchpoints:	6
Touchscreen Technologie:	Infrarot
Lebensdauer des Panels:	- h
S-Video-Eingang:	Nein
RS-232C:	Ja
Display-Auflösung:	1920 x 1080 Pixel
Rahmenbreite (oben):	64 mm
Ethernet/LAN:	Nein