Sharp PG-D4010X Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp PG-D4010X (34 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/34
MODEL
PG-D4010X
DATA PROJECTOR
SETUP MANUAL
Connecting Pin Assignments .............................. 2
RS-232C Specifi cations and Commands ........... 4
Setting up the Projector Network Environment
... 9
1. Connecting the Projector to a Computer ...........10
2. Setting an IP Address for the Computer ............11
3. Setting up a Network Connection for the
Projector .......................................................13
Controlling the Projector via LAN ..................... 15
Controlling the Projector Using Internet Explorer
(Version 5.0 or later)......................................15
Confi rming the Projector Status (Status) ................16
Controlling the Projector (Control) ..........................16
Setting and Adjusting the Projector
(Settings & Adjustments) ..............................17
Setting the Security (Network – Security) ...............17
Making General Settings for the Network
(Network – General) .....................................18
Setting for Sending E-mail when an Error Occurs
(Mail – Originator Settings) ..........................18
Setting Error Items and Destination Addresses
to which E-mail is to be Sent when an
Error Occurs (Mail – Recipient Settings) ......19
Setting Error Items and the URL that are to be
Displayed when an Error Occurs
(Service & Support – Access URL) ...............19
Setting up the Projector Using RS-232C or
Telnet .......................................................... 20
When Connecting Using RS-232C .........................20
When Connecting Using Telnet ..............................21
SETUP MENU (Main Menu) ....................................22
ADVANCED SETUP MENU ....................................22
View Setting Detail List ([V]View All Setting) ...........23
Set Items ................................................................23
Save Settings and Quit ([S]Save & Quit) .................24
Quit without Saving Settings ([Q]Quit Unchanged)
...24
IP Address Setting ([1]IP Address) .........................25
Subnet Mask Setting ([2]Subnet Mask) ..................25
Default Gateway Setting ([3]Default Gateway) .......25
User Name Setting ([4]User Name) ........................25
Password Setting ([5]Password) .............................26
RS-232C Baud Rate Setting
([6]RS-232C Baud Rate) ...............................26
Projector Name Setting ([7]Projector Name) ..........26
DHCP Client Setting ([8]DHCP Client) ....................26
Disconnecting All Connections
([D]Disconnect All) ........................................27
Entering ADVANCED SETUP MENU
([A]Advanced Setup) .....................................27
Setting Auto Logout Time
(ADVANCED[1]Auto Logout Time) ................27
Data Port Setting (ADVANCED[2]Data Port) ...........27
Carrying out Network Ping Test
(ADVANCED[5]Network Ping Test) ...............28
Setting of Accept IP Address (ADVANCED
[6]Accept IP Addr(1) – [8]Accept IP Addr(3))
..28
Accepting All IP Addresses
(ADVANCED[9]Accept All IP Addr) ...............28
Setting of Search Port
(ADVANCED[0]Search Port) ..........................29
Return to Default Settings
(ADVANCED[!]Restore Default Setting) ........29
Return to Main Menu
(ADVANCED[Q]Return to Main Menu) ..........29
Resetting the Lamp Timer of the Projector
via LAN ....................................................... 30
Troubleshooting .................................................. 32
-2
Connecting Pin Assignments
COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals: mini
D-sub 15 pin female connector
COMPUTER Input/Output COMPUTER Input/Output
Pin No. Signal Pin No. Signal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Video input (red)
Video input (green/sync on green)
Video input (bluea)
Not connected
Not connected
Earth (red)
Earth (green/sync on green)
Earth (blue)
Not connected
GND
Not connected
Bi-directional data
Horizontal sync signal: TTL level
Vertical sync signal: TTL level
Data clock
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
PR (CR)
Y
PB (CB)
Not connected
Not connected
Earth (PR)
Earth (Y)
Earth (PB)
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
DVI-I Terminal: 29 pin connector
DVI Digital Input•
Pin No. Signal Pin No. Signal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
T.M.D.S data 2–
T.M.D.S data 2+
T.M.D.S data 2 shield
Not connected
Not connected
DDC clock
DDC data
Not connected
T.M.D.S data 1–
T.M.D.S data 1+
T.M.D.S data 1 shield
Not connected
Not connected
+5V power
Ground
16.
17.
18.
19.
20.
21.
22.
23.
24.
C1.
C2.
C3.
C4.
C5.
Hot plug detection
T.M.D.S data 0–
T.M.D.S data 0+
T.M.D.S data 0 shield
Not connected
Not connected
T.M.D.S clock shield
T.M.D.S clock+
T.M.D.S clock–
Not connected
Not connected
Not connected
Not connected
Ground
DVI Analog RGB Input• DVI Analog Component Input•
Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Not connected
Not connected
Not connected
Not connected
Not connected
DDC clock
DDC data
Vertical sync
Not connected
Not connected
Not connected
Not connected
Not connected
+5V power
Ground
16.
17.
18.
19.
20.
21.
22.
23.
24.
C1.
C2.
C3.
C4.
C5.
Hot plug detection
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Analog input Red
Analog input Green
(Sync On Green)
Analog input Blue
Horizontal sync
(Composite Sync)
Ground
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Ground
16.
17.
18.
19.
20.
21.
22.
23.
24.
C1.
C2.
C3.
C4.
C5.
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Not connected
Analog input Pr/Cr
Analog input Y
Analog input Pb/Cb
Not connected
Ground
5
10
15
1
11
6
5
10
15
1
11
6
1724
1823
C3
2 1
916
C1
C2
C4
C5
8 7
1724
1823
C3
2 1
916
C1
C2
C4
C5
8 7
-3
RS-232C Terminal: D-sub 9 pin male connector
Pin No. Signal Name I/O Reference
1.
2.
3.
4.
5.
6.
7.
8.
9.
RD
SD
SG
RS
CS
Receive Data
Send Data
Signal Ground
Request to Send
Clear to Send
Input
Output
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to CS in internal circuit
Connected to RS in internal circuit
Not connected
RS-232C Cable recommended connection: D-sub 9 pin female connector
Pin No. Signal Pin No. Signal
1.
2.
3.
4.
5.
6.
7.
8.
9.
CD
RD
SD
ER
SG
DR
RS
CS
CI
1.
2.
3.
4.
5.
6.
7.
8.
9.
CD
RD
SD
ER
SG
DR
RS
CS
CI
Projector
Pin No.
Computer
Pin No.
4
5
6
4
5
6
USB Terminal: Type B USB connector LAN Terminal: LAN (RJ-45)
Pin No. Signal Name Pin No. Signal Pin No. Signal
1.
2.
3.
4.
VCC
USB–
USB+
SG
USB power
USB data–
USB data+
Signal Ground
1.
2.
3.
4.
TX+
TX–
RX+
5.
6.
7.
8.
RX–
1 5
6 9
1 5
6 9
5 1
9 6
5 1
9 6
Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the
controlling device (e.g. computer).
•
Note
Depending on the controlling device used, it may be necessary to connect Pin 4 and Pin 6 on the
controlling device (e.g. computer).
•
Note
4 3
1 2
4 3
1 2
8... 18 ... 1
Connecting Pin Assignments
Produktspezifikationen
| Marke: | Sharp |
| Kategorie: | Beamer |
| Modell: | PG-D4010X |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sharp PG-D4010X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beamer Sharp
17 September 2024
16 September 2024
3 September 2024
19 August 2024
16 August 2024
15 August 2024
13 August 2024
10 August 2024
10 August 2024
9 August 2024
Bedienungsanleitung Beamer
- Beamer Samsung
- Beamer 3M
- Beamer Acer
- Beamer Anker
- Beamer Asus
- Beamer Sanyo
- Beamer BenQ
- Beamer Hama
- Beamer HP
- Beamer Medion
- Beamer Philips
- Beamer Sony
- Beamer Panasonic
- Beamer LG
- Beamer OK
- Beamer Canon
- Beamer Technaxx
- Beamer Renkforce
- Beamer Blaupunkt
- Beamer Pyle
- Beamer Mitsubishi
- Beamer Hisense
- Beamer Salora
- Beamer Aiptek
- Beamer Auna
- Beamer Lenco
- Beamer JVC
- Beamer Optoma
- Beamer Xiaomi
- Beamer Stairville
- Beamer Smartwares
- Beamer Hitachi
- Beamer Toshiba
- Beamer Livoo
- Beamer Casio
- Beamer Epson
- Beamer ViewSonic
- Beamer Dell
- Beamer Lenovo
- Beamer Ricoh
- Beamer Smart
- Beamer Kodak
- Beamer Leica
- Beamer Adj
- Beamer Vogel's
- Beamer Eurolite
- Beamer Showtec
- Beamer Barco
- Beamer Bauer
- Beamer Eiki
- Beamer InFocus
- Beamer Nebula
- Beamer NEC
- Beamer Overmax
- Beamer Marantz
- Beamer Kogan
- Beamer Acco
- Beamer Elmo
- Beamer D-Link
- Beamer Smart Tech
- Beamer Reflecta
- Beamer ZTE
- Beamer Derksen
- Beamer Cameo
- Beamer Yaber
- Beamer Vivitek
- Beamer RCA
- Beamer Promethean
- Beamer GPX
- Beamer Ibm
- Beamer La Vague
- Beamer Maxell
- Beamer Naxa
- Beamer PLUS
- Beamer Steren
- Beamer XGIMI
- Beamer Planar
- Beamer Dahua Technology
- Beamer Tzumi
- Beamer Christie
- Beamer Atlantis Land
- Beamer EKO
- Beamer Varytec
- Beamer ASK Proxima
- Beamer Beghelli
- Beamer Laserworld
- Beamer Vankyo
- Beamer AAXA Technologies
- Beamer Knoll
- Beamer Boxlight
- Beamer Miroir
- Beamer MicroVision
- Beamer Ultimea
- Beamer Dukane
- Beamer Dream Vision
- Beamer Touchjet
- Beamer AWOL Vision
- Beamer KickAss
- Beamer VAVA
- Beamer Panamorph
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024