Shark EP035T2 Bedienungsanleitung

Shark Staubsauger EP035T2

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Shark EP035T2 (14 Seiten) in der Kategorie Staubsauger. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/14
Model EP035/EP035T2
THREE (3) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material
and workmanship for a period of three (3) years from the date of the original purchase.
This warranty applies only to normal domestic household use.
Should your appliance fail to operate properly while in use under normal household
conditions within the three (3) year warranty period, return the complete appliance and
accessories, freight prepaid to EURO-PRO Operating LLC at the address given below.
In US: EURO-PRO Operating LLC, 94 Main Mill street, Door 16, Plattsburgh, NY 12901
In Canada:EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec, H4S 1A7
If the appliance is found to be defective in material or workmanship, EURO-PRO
Operating LLC will repair or replace it free of charge. Proof of purchase date and $ 9.95
to cover the cost of return shipping and handling must be included. *
Non-durable parts including, without limitation, dust cup filters, filters, brushes and
electrical parts which normally require replacement are specifically excluded from
warranty.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts
and does not apply to any unit that has been tampered with or used for commercial
purposes. This limited warranty does not cover damage caused by misuse, abuse,
negligent handling or damage due to faulty packaging or mishandling in transit. This
warranty does not cover damage or defects caused by or resulting from damages from
shipping or repairs, service or alterations to the product or any of its parts, which have
been performed by a repair person not authorized by EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC
if any, is limited to the specific obligations expressly assumed by it under the terms of
the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or
consequential damages of any nature whatsoever. Some states do not permit the
exclusion or limitation of incidental or consequential damages, so the above may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase date and to attach tag to item before packing with your name,
complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with item. We recommend you
insure the package (as damage in shipping is not covered by your warranty). Mark
the outside of your package “ATTENTION CUSTOMER SERVICE”. We are
constantly striving to improve our products, therefore the specifications
contained herein are subject to change without notice.
Turbo Hand Vac with
TAPCLEAN®HEPA Dust Cup Filter
OWNER’S MANUAL
Models EP035/EP035T2
120V., 60Hz., 6.67 Amps
For information or assistance:
USA: EURO-PRO Operating LLC Canada: EURO-PRO Operating LLC
94 Main Mill Street, Door 16 4400 Bois Franc
Plattsburgh, NY 12901 St. Laurent, QC H4S 1A7
www.sharkvac.com
Printed in China 7
TROUBLE SHOOTING GUIDE
IMPORTANT SAFETY INSTRUCTIONS
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
HAND VACUUM
WILL NOT
OPERATE
1. Power cord not firmly plugged
into outlet.
2. No power in wall outlet.
3. Needs servicing.
4. Thermostat has tripped.
1. Plug unit in firmly.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call 1-800-798-7398 in the
U.S or 1-514-842-8691 in
Canada.
4. Turn the unit off and unplug
from outlet. Allow to cool.
HAND VACUUM
WILL NOT PICK-UP
OR SUCTION
POWER IS WEAK
1. Dust cup is full.
2. Unit clogged.
3. HEPA Dust Cup Filter needs
cleaning or replacing.
1. Empty dust cup –
(see page 5).
2. Turn unit off and unplug
from wall outlet. Remove
HEPA Dust Cup Filter and
check for object(s) in air
duct and remove.
3. Clean or replace HEPA
Dust Cup Filter.
(see page 5)
DUST ESCAPING
FROM HAND
VACUUM
1. Dust cup is full.
2. HEPA Dust Cup Filter is not
installed correctly.
3. There is a puncture/hole in
HEPA Dust Cup Filter.
1. Empty dust cup.
2. Review HEPA Dust Cup
Filter instructions.
(see page 5)
3. Replace HEPA dust cup
filter. (see page 5)
HAND VACUUM
HOSE OR
BRUSHES WILL
NOT PICK-UP
1. Hose clogged.
2. Dust cup is full.
1. Remove hose and/or
bushes. Remove obstruction
from hose.
2. Empty and clean dust cup.
ORDERING REPLACEMENT DUST CUP FILTERS
When using your SHARK TURBO HAND VAC, basic safety precautions should
always be observed, including the following:
To reduce the risk of fire, electric shock, or
injury:
•Do not leave the SHARK plugged in
when unattended. Unplug the electrical cord
when not in use and before servicing.
•Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
• Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
•Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
•Use only extension cords UL-rated or cUL at
15 amperes. Extension cords rated for less
amperage may overheat. Care should be
taken to arrange the cord so that the cord
cannot be pulled or tripped over.
• Turn off all controls as applicable before
unplugging from electrical outlet.
•Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
•Do not handle plug or hand vacuum with wet
hands or operate without shoes.
•Do not put any objects into openings. Do not
use with any opening blocked. Keep free of
dust, lint, hair and anything else that may
reduce air flow.
• Store your appliance indoors in a cool, dry
area.
• Keep your work area well lit.
•Do not immerse the hand vacuum into water
or other liquids.
• Keep end of hose and other openings away
from your face and body.
• Use only on dry surfaces.
• Using improper voltage may result in damage
to the motor and possible injury to the user.
Correct voltage is listed on rating label.
1. Read all instructions before using your
SHARK hand vacuum.
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
5. Do not allow cord to touch hot surfaces.
6. Do not pull cord around sharp corners or
close door on cord.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the SHARK. Return the system to
EURO-PRO Operating LLC (see warranty)
for examination and repair. Incorrect re-
assembly or repair can cause a risk of
electrical shock or injury to persons when
the SHARK is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected.
9. Keep hair, loose clothing, fingers and all
parts of body away from opening and
moving parts.
10. Do not use to pick up flammable or
combustible liquids such as gasoline or use
in areas where they may be present.
11. Do not pick up anything that is burning or
smoking such as cigarettes, matches or hot
ashes.
12. Use extra care when cleaning on stairs.
13. Do not use the hand vacuum without the
HEPA dust cup filter in place.
14. This appliance is intended only for
household use. Follow all user instructions
in this manual.
TO ORDER REPLACEMENT FILTERS
for Models EP035/EP035T2
Call: 1-866-98SHARK (1-866-987-4275)
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
FOR TECHNICAL SUPPORT
for Models EP035/EP035T2
SAVE THESE INSTRUCTIONS or
visit our website: www.sharkvac.com
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
For Household Use Only Please Note: After each Use - Always remove the Filter Debris Screen from the HEPA Dust
Cup Filter, then vigorously “TapClean” HEPA Filter until no more dust can be removed. Filter
should be rinsed and completely dried at least once a month or when suction appears
reduced.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse under a
tap until all observable dirt has been removed. Some discoloration of the HEPA filter material
may occur, this is normal and will not affect the filter's performance. When finished, shake off
excess water. Do NOT wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT DRY IN
DRYER.
WARNING: To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
Rev. 04/03C 6
1
OPERATING INSTRUCTIONS cont. GETTING TO KNOW YOUR SHARK HAND VACUUM
Cleaning & Changing the
HEPA Dust Cup Filter
Warning: Always unplug the unit from
electrical outlet before opening the Dust
Cup (container).
Important: Do NOT use the HEPA filter
cartridge without the debris screen in
place.
Warning:After each Use - Always
remove the Filter Debris Screen from the
HEPA Dust Cup Filter, then vigorously
“TapClean” HEPA Filter until no more
dust can be removed.
Fig. 4
Fig. 3
Debris
Screen HEPA Filter
PLEASE NOTE: The white pleated
filter material in the HEPA Dust Cup
Filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
Dust Cup Filter
is properly
"TapCleaned”
after each use
and suction
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
more dust can be removed, then
rinsed under the faucet and allowed to
dry for 24 hours before refitting into
the vacuum. (Fig. A) Wash once a
month or when suction appears
reduced.
5. Vigorously “TapClean”
the HEPA Dust Cup
Filter on a hard
surface until no more
dust is observed
falling out from
between the pleats of
the filter. (fig. 4)
Fig. 5
Debris
Screen
6. “TapClean” the Debris
Screen or rinse under
a faucet until clean.
(fig. 5) Remember that
the Debris Screen
must be completely
dry before reinstalling
in the vacuum.
7. Replace the Debris Screen on the
HEPA Dust Cup Filter and reinstall
filter assembly in the vacuum. (not
shown)
Fig. A
Wash once a
month or when
suction
appears
reduced.
Warning: Allow 24
hours for drying before
replacing in unit.
HEPA FilterDebris Screen
11
11
5
IMPORTANT, Please Note : The
“TapClean” HEPA Dust Cup Filter &
Debris Screen will stop most of the tiniest
dust particles and airborne allergens from
re-entering the air you breathe. In fact it
stops 99.97% of all particles as small as
0.3 microns - many times smaller than a
human hair!!! Because of this incredible
filtration performance, the HEPA Dust Cup
Filter will quickly accumulate, inside the
white filter folds, many fine dust particles
that are difficult to see but which will
eventually block or reduce your suction
power - if not cleaned properly. Clean the
HEPA Filter and Debris Screen after each
use as described in this section.
1. To open the Dust Cup (container),
push button and detach the Dust
Cup (container ). (Fig. 1)
2. Pull out the HEPA Dust Cup Filter.
(Fig. 2)
Fig.2
Fig. 1
6. Suction Hole
7. Shoulder Strap
8. Pet Hair Removal Attachment
9. Cleaning Brush
10. Flexible Hose
11. Hepa Filter Assembly
1. Dust Cup Release Button
2. On/Off Power Switch
3. Handle
4. Intelli-Sense Filter MonitorTM
5. Dust Cup (Container)
3. Empty the dust from the Dust Cup
(container).
4. Separate the debris screen from the
HEPA filter cartridge by grasping the
debris screen with one hand and the
filter frame with the other and pull
apart. (fig. 3) Technical Specifications
Voltage: 120V., 60Hz.
Power: 6.67 Amps, 800 Watts
CAUTION:The suction hole must be
open, free of any obstructions at all
times. Otherwise, the motor will overheat
and could become damaged. 2
5

Produktspezifikationen

Marke: Shark
Kategorie: Staubsauger
Modell: EP035T2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shark EP035T2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Staubsauger Shark

Shark

Shark Pursuit EP724 Bedienungsanleitung

14 Oktober 2024
Shark

Shark Rotator NV500 Bedienungsanleitung

7 Oktober 2024
Shark

Shark IZ201UK Bedienungsanleitung

3 Oktober 2024
Shark

Shark Navigator Freestyle SV1106 Bedienungsanleitung

9 September 2024
Shark

Shark Ultralight Pet Pro HZ602 Bedienungsanleitung

9 September 2024
Shark

Shark Rocket HV320UKT Bedienungsanleitung

8 September 2024
Shark

Shark BU3521UK Bedienungsanleitung

6 September 2024
Shark

Shark PowerDetect RV2820VEUK Bedienungsanleitung

6 September 2024
Shark

Shark Wandvac WS642AE Bedienungsanleitung

31 August 2024
Shark

Shark Rocket Powerhead AH450UKD Bedienungsanleitung

26 August 2024

Bedienungsanleitung Staubsauger

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Hoover

Hoover HC-420-HKA Bedienungsanleitung

16 Oktober 2024
LG

LG V-C5764HEU Bedienungsanleitung

16 Oktober 2024
LG

LG VC5016GHTY Bedienungsanleitung

15 Oktober 2024
AEG

AEG VX9-4-6PT Bedienungsanleitung

15 Oktober 2024
Zanussi

Zanussi ZAN3010EL Bedienungsanleitung

15 Oktober 2024
Coline

Coline VCB46A15F-70 Bedienungsanleitung

15 Oktober 2024
Miele

Miele S 183 Bedienungsanleitung

15 Oktober 2024
LG

LG VC33205NHTB Bedienungsanleitung

15 Oktober 2024
Meec Tools

Meec Tools 009-639 Bedienungsanleitung

15 Oktober 2024
Melissa

Melissa 16420214 Bedienungsanleitung

15 Oktober 2024