Samsung UN55ES6003F Bedienungsanleitung

Samsung Fernsehen UN55ES6003F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung UN55ES6003F (4 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Channel Menu

Memorizing Channels

When you ﬁrst set up your TV using , the TV memorized Plug & Play

the channels that were available over the air or through your cable

system and added them to the . The and Channel List Antenna

Auto program functions described below let you re-run the channel

memorization function without having to re-run the Plug & Play

procedure.

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source, (using an antenna) or . Air Cable

Select Menu > > > or . After you have Channel Antenna Air Cable

selected the signal source, go on to the Auto Program function.

✎Selecting the signal source using the function also Antenna

determines the signal source the TV is tuned to. For example,

if you receive your TV signal over the air, and you select , Cable

you will see only snow. You must select Air to see a picture.

Auto Program

The function memorizes all channels that are Auto Program

available over the air or through your cable system and adds them to

the .Channel List

To start Auto Program, follow these steps:

1. Push MENU

→Channel →Auto Program →ENTER

your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV

signal.

Air

If your TV is connected to an antenna choose , and then press Air

ENTER

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose , and then Cable

press ENTER

. Go to Step 3.

Auto

If you choose , and then press Auto ENTER

, the TV will

automatically select the correct Antenna source. Go to

Step 3.

3. On the Cable Type screen, use the buttons to select ◄/►/▲/▼

the type of digital and analog cable systems you have: , , STD HRC

or Most systems are (Standard). When done, select IRC. STD

Start, and then press ENTER

. The TV will start memorizing

channels.

✎Channel memorization can take up to 45 minutes, depending

on your cable system.

✎Memorized channels are added to the Added Channels

list. These are the channels you will see when you use the

Channel buttons on your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after is Auto Program

completed. This process may take up to 20~30 minutes.

✎Press the ENTER

button to stop the Clear Scrambled

Channel.

✎This function is only available in mode. Cable

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel

in the , or screen, pressing All Channels, Added Channels Favorite

the / buttons, and then pressing the ▲ ▼ ENTER

button.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air Zoom Select ''T Tools ► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the buttons to view each list. ▲/▼

■

All Channels: Shows all currently available channels including

those you deleted from the Added Channels

list.

■

Added Channels Added Channels: Shows all . These are the

channels that appear when you press the CH button.

■*

Favorite: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

scheduled using .Timer Viewing

✎Remote control buttons active on the Channel List screen.

xGreen (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A

mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

( ): Displays the menu. (The Tools Channel List Tools Tools

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons Meaning

A selected channel.

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you

can use on the

All Channel

Added Channels

, and

Favorite List

screens. To view, select a list screen, select a channel, and then

press the

TOOLS

button.

■

Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channels from the list, follow these steps:Added Channels

1. Select one or more channels in the list using Added Channels

the buttons and the Yellow Select button on your remote.▲/▼

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Delete ENTER

button.

To add channels to the list, follow these steps:Added Channels

1. Select one or more channels in the list using the All Channels

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Add ENTER

button.

✎All deleted channels will be shown on the All Channels list.

You add channels back to the Added Channels list on the

All Channels list.

✎A gray-colored channel indicates the channel has been

deleted from the Added Channels list.

✎The menu option only appears for deleted channels.Add

■

Add to Favorite/Delete from Favorite: Lets you add channels

to and delete channels from your list.Favorites

To add channels to the list, follow these steps:Favorites

1. Select one or more channels in the list using the All Channels

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Add to Favorite

ENTER

button.

To delete channels from the list, follow these steps:Favorites

1. Select one or more channels in the Channels list Favorite

using the buttons and the Yellow Select button on your ▲/▼

remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then Delete from Favorite

press the ENTER

button.

■

Timer Viewing: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time ﬁrst in the > Time Clock

function to use .Time Viewing

To schedule a channel, follow these steps:

1. Select a channel in the list using the Added Channels ▲/▼

buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Time Viewing

ENTER

button. The Time Viewing screen appears.

Antenna Channel Repeat

▲

DTV Air 6-1 Once

▼

Move

Adjust

Enter

Return

Timer Viewing

Date Start Time

01-01-2012 12 : 01 am

4. Use the buttons to move from entry ﬁeld to entry ﬁeld ◄/►

and the buttons to change the entries. Where numbers ▲/▼

are displayed, you can also enter numbers directly using the

number keypad on your remote.

✎If you select or , the date you Everyday Every Week

select in the Date field becomes the start date for your

scheduled viewing. For , the TV will turn on Everyday

every day, at the time you selected, starting from that

date. For , the TV will turn on every week, Everyweek

on the same day of the week as the start date you

selected, at the time you selected, from that day on. If

you select , the TV will turn on once, on the date Once

and time you selected.

5. Press the ENTER

button on your remote when done.

✎Only Added Channels can be scheduled.

✎Scheduled programs and channels are displayed in the

Programmed List.

✎When you select a digital channel, press the ► button to

view the digital program list. If you highlight a program in

the list, and then press the ENTER

( ) button, Schedule

you set Timer Viewing for that program directly.

■

Select All: Select all the channels in the displayed channel list.

■

Deselect All: Deselect all the selected displayed channels.

✎You can only select when one or more Deselect All

channels are selected.

■

Channel Name Edit: Analog channels only. Lets you assign a

name of up to ﬁve characters to an analog channel. For example,

Hist, Food, Golf, etc. This makes it easier to ﬁnd and select a

channel .

■

Auto Program Auto Program: See under Memorizing Channels.

Programmed List (on the Channel List Screen)

The list displays the channels and programs you Programmed

have scheduled for viewing using the function. You Time Viewing

can view, modify, or delete a show you have scheduled using the

functions on the List screen Tools menu.Programmed

Programmed List Screen Tools Menu

■

Change Info: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want to change, and then press the button. TOOLS

The Tools Menu appears.

3. Select , and then press the Change Info ENTER

button.

The screen appears.Time Viewing

4. Use the buttons to move from entry ﬁeld to entry ﬁeld ◄/►

and the buttons to change the entries. Where numbers ▲/▼

are displayed, you can also enter numbers directly using the

number keypad on your remote.

5. Press the ENTER

button when done.

■

Cancel Schedules: Cancel a show or channel you have

scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want to cancel, and then press the button. TOOLS

The Tools Menu appears.

3. Select , and then press the Cancel Schedules ENTER

button. The screen appears.Cancel Schedule

4. Select , and then press the OK ENTER

button.

■

Information: Display the information for a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want information for, and then press the TOOLS

button. The Tools Menu appears.

3. Select , and then press the Information ENTER

button.

The Information screen appears.Time Viewing

4. Select and press the Change Info ENTER

button

to change information, or select and press the Close

ENTER

button to close the Information screen.

■

Select All / Deselect All: You can select or deselect all

channels in the channel list.

Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

< >CH (Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when

you press the button.< >CH

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, ﬁne tune the channel

manually.

✎Select the channel, and then select Fine Tune.

✎Fine tuned channels that have been saved are marked with

an asterisk “*” on the right-hand side of the channel number

in the channel banner.

✎To reset fine-tuning, select the channel, select Fine Tune, and

then select on the Reset Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the initial setup procedure. For Plug & Play

instructions, see your Quick Start Guide.

Language

Set the menu language.

✎Choose between English, and Español, Français.

Setting the Time

Time

✎The time you set will appear when you press the INFO

button.

■

Clock: Set the clock so you can use the various timer features

of the TV.

✎If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select > > .Setup Time Clock

2. Press ENTER

and select or , and then press Auto Manual

ENTER

again.

If you selected Auto:

The TV will automatically download the correct time from a

digital channel.

• Select , and then press the Time Zone ENTER

button.

Use the buttons to select your , and then ▲/▼ Time Zone

press ENTER

• Select DST (Daylight Savings Time), and then press

ENTER

. Select if you want to turn the DST On

adjustment on and off manually. Select to turn off the Off

DST adjustment. Select if you want the TV to adjust Auto

to DST automatically. Press ENTER

when done.

✎DST and function are only available when Time Zone

the is set to .Clock Mode Auto

If you selected Manual:

The screen appears. Use the buttons to Clock Set ▲/▼

change the values in each ﬁeld or use the number buttons to

enter the values directly. Use the buttons to move from ◄/►

ﬁeld to ﬁeld. When done with all the ﬁelds, press ENTER

✎Available only when is set to .Clock Mode Manual

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎To cancel the Sleep Timer, select .Off

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings.

✎You must set the clock first.

■

On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate ﬁelds for the and . Use the On Time Off Time

◄/► ▲/▼ buttons to move from ﬁeld to ﬁeld. Use the buttons

to change the values in each ﬁeld. To activate the timer with

the setting you have chosen, set the Activate/Inactivate ﬁeld to

Activate.

■

Volume: Set the desired loudness.

■

Contents: To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a speciﬁc

channel or play back contents such as photo or audio ﬁles.

Use the buttons to move to move to the Contents ﬁeld, ◄/►

and then press the ENTER

button. The Contents screen

appears. Use the buttons to move from ﬁeld to ﬁeld. Use ◄/►

the buttons to change the values in each ﬁeld.▲/▼

- TV/USB: Select or . The USB device must be TV USB

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, or .Air Cable

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on

the USB device:

✎The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the buttons to move to the ﬁeld under ◄/► Music

or the ﬁeld under , and then press the Photo ENTER

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of

the menu options available on your TV. The Tools menus display

a selected number of frequently used menu options that change

depending on the screen you are viewing. A Tools menu symbol

( ) in the lower right side of the screen indicates that a Tools menu T

is available.

The Main menu has seven primary categories:

yPicture yInput

ySound yApplication

yChannel ySupport

ySetup

To view the Main menu, press the button on your remote. To MENU

view a Tools menu, press the button on your remote.TOOLS

✎The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have

selected the HDMI source, the Channel category will not

appear. To see the Channel category, you must first select TV

in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol (

) next to an option

name indicates the option is also available in one of the Tools

menus.

Picture Menu

Mode

Select your preferred picture mode.

✎When your TV is connected to a PC, you can only select

Entertain and Standard.

■

Dynamic: Brightens the screen. Suitable for a bright room.

■

Standard: Suitable for a normal.

■

Movie: Darkens the screen, making it less glary. Suitable for

watching movies in a darkened room.

■

Entertain: Sharpens the picture. Suitable for games.

✎Only available when the TV is connected to a .PC

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast: Increases or decreases the contrast between dark and

light areas of the picture.

■

Brightness: Adjusts the brightness of the screen. Not as

effective as Backlight.

■

Sharpness: Sharpens or dulls the edges of objects.

■

Color: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the

picture becomes black, white and gray.

■

Tint: Adjusts the amount of green and red in the picture. As you

increase the amount of green, the amount of red decreases and

vice versa.

✎When the TV is connected to a PC, you can only make

changes to Backlight, Contrast, Brightness, and

Sharpness.

Advanced Settings

Available in Standard Movieand mode only.

Compared to previous models, new Samsung TVs offer a more

precise picture with more precise controls.

✎When your TV is connected to a PC, you can only make

changes to and .Gamma White Balance

■

Color Space (Auto / Native): Auto automatically matches the

range of colors available to create pictures to the color range of

the video source. Native provides a color range wider than the

color range of the video source.

■

White Balance: Adjusts the color temperature of the picture so

that white objects look white (instead of, for example, slightly

pink or slightly yellow) and the overall color of the picture looks

natural.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red,

green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green,

blue) brightness.

Reset White Balance: Resets the to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Selects the black

level to adjust the screen depth. Darker settings make blacks

look darker.

■

Flesh Tone: Adjusts the amount of red in skin tones.

■

Motion Lighting (Off / On): When on, the TV automatically

adjusts the brightness of the screen in response to the

brightness of the room. In bright light, the screen brightens. In

dim light, the screen dims.

✎Available in Standard mode only.

Picture Options

✎When the TV is connected to a PC, you can only make

changes to the Color Tone HDMI Black Level, Size and .

■

Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes

the picture bluer (cooler). Warm 1 and Warm 2 make the picture

redder (warmer).

✎Warm1 and are deactivated when the picture Warm2

mode is set to .Dynamic

■

Size: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

the TVs 16:9 mode most of the time.

16:9: Sets the picture to the 16:9 wide screen format.

Zoom1: Provides moderate magniﬁcation of the picture. Sides,

top, and bottom are cut off.

Zoom2: Provides larger magniﬁcation of the picture. Sides, top,

and bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture

ﬁts the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎Do not watch your TV in the 4:3 format for a long time.

Traces of borders displayed on the left, right and center of

the screen may cause image retention (screen burn) which

is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when

your TV is inputting HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) HD signals.

✎HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

✎You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available

by Input Source are listed below:

2. Press the ENTER

button. A list of folders on the device

appears.

✎If there are no folders on your device, press the

Yellow select button to select the Root folder, and

then press the button. The Timer screen RETURN

re-appears.

3. Use the buttons to highlight a folder that contains ▲/▼

music or photos, and then press the Yellow select button

to select the folder.

4. Press the button. The Timer screen re-appears.RETURN

■

Repeat Once Everyday Mon~Fri Mon~Sat Sat~Sun: Select , , , ,

or . If you select , you can select the days you Manual Manual

want to activate the timer by using the buttons to highlight ◄/►

the day, and then pressing the ENTER

button. To unselect a

day, highlight it, and then press the ENTER

button.

When you ﬁnished making all your selections on the Timer screen,

press either the ENTER

or button.RETURN

Other Features

Program Rating Lock

The feature lets you block programs Program Rating Lock

you've determined are inappropriate for your children based on

the program's ratings. To access the Program Rating Lock

feature and make any changes, you must enter a PIN (personal

identiﬁcation number). To watch a blocked program, you must also

enter the same PIN.

✎Program Rating Lock is not available in HDMI or

Component mode.

✎The default PIN number of a new TV set is “0-0-0-0”. You can

set your own PIN using the Change PIN function.

How It Works

When you access the Menu functions for Program Rating Lock

the ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN

screen closes and the Program Rating Lock Menu appears. Every

time you access the functions, the PIN Program Rating Lock

screen will appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating

Lock, and then press ENTER

. Select , and then press the On

ENTER

key again. Depending on what type of programs or

movies you want to block, select one of the options on the screen,

and then press the ENTER

button. The options are listed below:

■

TV Parental Guidelines: You can block TV programs based

on their ratings. This function allows you to control what your

children are watching.

■

MPAA Rating: You can block movies based on their MPAA

ratings. The Motion Picture Association of America (MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which ﬁlms are appropriate for

children.

■

Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French: You can block TV programs based on their

French Canadian ratings.

■

Downloadable U.S. Rating: Parental restriction information can

be used while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same

way for each option. Each option displays a grid or table. All the

tables have ratings listed on the left. The TV Parental Guidelines

option also has kinds of content listed across the top: : Lock all ALL

TV ratings. / : Fantasy violence / : Violence / : Sexual situation FV V S

/ : Adult Language / : Sexually Suggestive Dialog.L D

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

■

Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter them in ﬁelds. Enter New PIN

Re-enter the same 4 digits in ﬁelds. When the Conﬁrm New PIN

Change PIN screen disappears, press the button. The TV OK

has memorized your new PIN.

✎If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER POWER (off) → MUTE 8 2 4 →→→→ (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation™

or Xbox™ to your TV, you can enjoy a more realistic gaming

experience by turning on the function.Game Mode

✎Precautions and limitations for game mode:

xBefore you disconnect the game console and connect another

external device, set Game Mode to Off in the setup menu.

xIf you display the TV menu in Game Mode, the screen shakes

slightly.

✎Game Mode is not available when the input source is set to

TV.

✎After connecting the game console, set Game Mode to On.

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎The feature does not work in or Caption Component

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(Digital channels only) The Digital Captions function works with

digital channels.

✎Service1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letters. The default is White.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎See the warranty card for more information on warranty

terms.

Wide screen format LED Displays (16:9, the aspect ratio of the

screen width to height) are primarily designed to view wide screen

format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to

ﬁll the screen if your model offers this feature and the images are

constantly moving. Displaying stationary graphics and images on

screen, such as the dark sidebars on non- expanded standard

format television video and programming, should be limited to no

more than 5% of the total television viewing per week. Additionally,

viewing other stationary images and text such as stock market

reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for

all televisions. Displaying stationary images that exceed the above

guidelines can cause uneven aging of LED Displays that leave

subtle, but permanent burned-in ghost images in the LED picture.

To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark

bars. On LED models that offer picture sizing features, use these

controls to view different formats as a full screen picture. Be careful

in the selection and duration of television formats you use for

viewing. Uneven LED aging as a result of format selection and use,

as well as burned-in images, are not covered by your Samsung

limited warranty.

•SAMSUNGELECTRONICSNORTHAMERICANLIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions

and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period

originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale

as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of

the purchaser. Conditions covered are limited only to manufacturing

defects in material or workmanship, and only those encountered

in normal use of the product. Excluded, but not limited to, are

any originally speciﬁed provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements,

accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please

call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still

image elements (such as TV channel logos, TV shows or movies

in panorama or 4:3 format, stock or news scroll bars, etc.) on the

screen. The constant display of still pictures can cause ghosting or

image burn-in (image retention) on the LED screen, which will affect

image quality. To reduce the risk of this effect, please follow the

recommendations below:

•Avoid displaying the same TV channel for long periods.

•Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

•Reduce brightness and contrast values to the minimum required

to achieve the desired picture quality. Values that exceed the

minimum may speed up the burn-in process.

•Frequently use all TV features designed to reduce image retention

and screen burn-in. Refer to proper user manual section for

details.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Country CANADA U.S.A.

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish Court

Mississauga, Ontario L5R

4B2 Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgeﬁeld Park, NJ 07660

Customer Care Center



1-800-SAMSUNG(726-7864)

Web Site

www.samsung.com/ca

(English)

www.samsung.com/ca_fr

(French)

www.samsung.com

LED TV

user manual

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04643A-00

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎Digital Caption Options are available only when you can

select and in .Default Service1 ~ Service6 Caption Mode

✎The Foreground and Background cannot be set to the

same color.

Melody

Lets you control whether a melody plays when the TV is turned on

or off.

✎The Melody does not play:

xWhen no sound is output from the TV because the MUTE

button has been pressed.

xWhen no sound is output from the TV because the volume

has been reduced to minimum with the VOL – button.

xWhen the TV is turned off by the Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour):

If the screen remains idle with a still image for a certain period

of time you deﬁne, the screen saver is activated to prevent the

formation of ghost images on the screen.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor (Off / On): To enhance your power savings; the

picture settings will automatically adapt to the light in the room.

✎If you adjust the , the will be set to Backlight Eco Sensor

Off.

Min. Backlight Eco Sensor On: When is , the minimum screen

brightness can be adjusted manually.

✎If is Eco Sensor On, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

appears in the test picture, select Yes and follow the directions

on the screen.

■

Sound Test: Use the built-in melody sound to check for sound

problems. If the problem occurs during the test, select Yes and

follow the directions on the screen.

■

Signal Strength: (Digital channels only) An HD channel’s

reception quality is either perfect or the channels are unavailable.

Adjust your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can ﬁnd information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a

USB Mass Storage Class (MSC) device.

MEDIA.P

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie

ﬁles to the jack on the back of the TV. A pop up window USB

appears.

3. Press the MEDIA.P button on your remote. The Media Play

menu appears.

Using the Media Play Menu

SUM

■

Change Device

Enter

Return

Media Play

Videos

To open Media Play in the Menu, follow these steps:

1. Press the MENU button. Then, press the or button to ▲ ▼

select on the left, and then press the Application ENTER

button.

2. Media Play (USB)Press the or button to select ▲ ▼ , and then

press the ENTER

button.

3. Videos, Music, Press the or button to select an icon (◄ ►

Photos, Settings), and then press the ENTER

button.

✎Media Play might not work properly with unlicensed

multimedia files.

✎Need-to-Know List before using Media Play (USB)

xThe file system supports FAT16, FAT32 and NTFS.

xCertain types of USB Digital camera and audio devices may not

be compatible with this TV.

xMedia Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9 Zoom1 Zoom2 ,,,

4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9 Wide Fit 4:3 , , ,

Screen Fit

■

Digital Noise Filter (Off / Low / Medium / High / Auto) : If the

broadcast signal received by your TV is weak, you can activate

the feature to reduce any static and ghosting Digital Noise Filter

that may appear on the screen.

✎When the signal is weak, try all the Digital Noise Filter

options until the TV displays the best picture.

■

HDMI Black Level (Normal / Low) : For HDMI signals, select

the black level to adjust the screen depth. Low make blacks look

darker.

✎Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto) : Sets the TV to automatically sense and

process ﬁlm signals from all sources and adjusts the picture for

optimum quality.

✎Available in ATV, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo): Enhances motion in fast moving scenes.

✎The info screen on your TV displays the resolution and

frequency of the incoming video signal (60Hz). This

displayed frequency is not what the TV is displaying by

using the function.Auto Motion Plus

■

LED Motion Plus (Off / On): Removes drag from fast scenes

with a lot of movement to provide a clear picture.

Picture Reset

■

Picture Reset (Reset Picture Mode/Cancel): Resets the

picture settings to their factory defaults.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow

a better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the loudness of speciﬁc bandwidth

frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

Available in Standard sound mode only.

SRS TruSurround HD is a patented SRS technology that solves

the problem of playing 5.1 multichannel content through two

speakers. TruSurround delivers a compelling, virtual surround

sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all

multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

✎You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

■

Mono: Select for channels that are broadcasting in mono or if

you are having difﬁculty receiving a stereo signal.

■

Stereo: Select for channels that are broadcasting in stereo.

■

SAP: Select to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Because each station has its own broadcasting conditions, the

volume may ﬂuctuate each time you change the channel. This

feature automatically adjusts the volume of a channel by lowering

the sound output when the modulation signal is high or by raising

the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an

uncompressed digital audio signal when you connect the digital

audio jack on the back of the TV to a digital audio in jack on a

receiver or home theater.

■

Audio Format (PCM/Dolby Digital): You can select the Digital

Audio output (SPDIF) format. The available Digital Audio output

format may differ depending on the input source.

✎By connecting the TV to a receiver or home theater with

Dolby Digital and 5.1ch speakers and selecting Dolby

Digital, you can maximize your interactive 3D sound

experience.

■

Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select , a Audio Delay

slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER

when done (0ms ~ 250ms).

Speaker Settings

■

Speaker Select (External Speaker / TV Speaker)

If you are listening to the sound track of a broadcast or movie

through an external receiver, you may hear a sound echo caused

by the difference in decoding speed between the TV’s speakers

and the speakers attached to your audio receiver. If this occurs,

set the TV to .External Speaker

✎When you set Speaker Select External Speaker to , the

TV’s speakers are turned off. You will hear sound through

the external speakers only. When you set Speaker Select

to TV Speaker both the TV’s speakers and the external

speakers are on. You will hear sound through both.

✎When Speaker Select is set to External Speaker, the

VOLUME and MUTE buttons will not operate and the

sound settings will be limited.

✎If there is no video signal, both the TV’s speakers and the

external speakers will be mute.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

xBefore connecting your device to the TV, please back up your

files to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data file damage or data loss.

xA USB device that requires high power (more than 0.5A) may not

be supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to

display on the screen.

xIf a ﬁle is corrupted or the TV does not support the ﬁle type, the

“Not Supported File Format” message appears.

xThe TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billing and settlements.

xPTP devices are not supported.

xIf an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

xIf the TV has no input during the time period set in Auto

Protection Time, the Screensaver will run.

xThe power-saving mode of some external hard disk drives may

be released automatically when your connect them to the TV.

xIf you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the ﬁles on the device.

xIf a USB device connected to the TV is not recognized, the list of

ﬁles on the device is corrupted, or a ﬁle in the list is not played,

connect the USB device to a PC, format the device, and check

the connection.

xIf a ﬁle you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the ﬁle.

xPhotos only supports the sequential jpeg format.

xThe option does not support the scene search and Videos

thumbnail functions.

xIf the number of ﬁles and folders saved on a USB storage device is

over approximately 4000, the ﬁles and folders may not appear and

some folders may not open.

xThe maximum displayed number of ﬁles, including sub folders, in

one folder of USB storage device is 2000.

►1/1

Movie 01.avi

Pause

Jump

Tools

Return

1. Media PlayIn the menu, press the or button to select ◄ ►

Videos, and then press the ENTER

button.

2. Press the buttons to select a video in the ﬁle list. ◄/►/▲/▼

3. Press the ENTER

button or



(Play) button.

- The file name is displayed on the top of the screen with the

playing time.

- If video time information is unknown, playing time and the

progress bar are not displayed.

- During video playback, you can search using the

◄

and

►

buttons.

✎In this mode, you can play movie clips contained in a game,

but you cannot play the game itself.

ySupported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub Picture FormatAVI

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

ySupported Video Formats

File

Extension Container ResolutionVideo Codec Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

*.mp4 MP4

DivX

3.11/4.x/5.1

/6.0

1920x1080 6~30 30Mbps

MP3 /

ADPCM /

AAC

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.avi

*.mkv

AVI,

MKV

DivX

3.11/4.x/5.1

/6.0

1920x1080 6~30 30Mbps MP3 /

AC3 /

LPCM /

ADPCM

/ DTS

Core

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.asf

*.wmv ASF

DivX 3.11

/ 4.x /5.1

/ 6.0

1920x1080 6~30 30Mbps

MP3 /

AC3 /

LPCM /

ADPCM

/ WMA

Pro

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps

H.264 1920x1080 6~30 30Mbps

*.ts

*.trp

*.tp

*.m2ts

MPEG2 1920x1080 6~30 30Mbps AC3 /

AAC /

MP3 /

DD+ /

HE-AAC

H. 264 BP

/ MP / HP 1920x1080 6~30 30Mbps

*.dat

*.mpg

*.mpeg

*.vob

MPEG1 1920x1080 24/25/30 30Mbps AC3 /

MPEG /

LPCM /

AAC

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP

/ MP / HP 1920x1080 6~30 30Mbps

*.3gp 3GPP

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps MP3

H.264 1920x1080 6~30 30Mbps

*.ﬂv

*.swf

ﬂash

formats

H.264 1920x1080 6~30 30Mbps

MP3

Sorenson

H.263 1920x1080 6~30 30Mbps

Other Restrictions

yVideo content will not play, or not play correctly, if there is an error

in the content or the container.

ySound or video may not work if the contents have a standard

bit rate/ frame rate above the compatible Frame/sec listed in the

Supported Video Formats table.

yIf the Index Table erroneous, the Seek (Jump) function is not

supported.

yThe menu may take longer to appear if the video’s bit rate

exceeds 10Mbps.

yVideo content can not be played if there are many contents in

one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are

not supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR

mode of WMA Pro is not supported)

WMA Lossless is not supported.

Music

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love uYo

Jhon

1st Album

Pop

2010

4.2MB

01:10 / 04:02

SUM

Pause

Jump

Tools

Return

Playlist

1. Media PlayIn the menu, press the or button to select ◄ ►

Music, and then press the ENTER

button.

2. Press the / / / buttons to select the desired Music in the ◄►▲▼

ﬁle list.

3. Press the ENTER

button or (Play) button.

✎During music playback, you can search using the and ◄

► button.

✎



(REW) and

(FF) buttons do not function during

play.

✎Media Play only displays files with MP3 and PCM file

extension. Other file extensions are not displayed, even if they

are saved on the same USB device.

✎If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

Photos

Image1024.jpg 1024x768 2010/2/1 3/15

Pause

Previous/Next

Tools

Return

Normal

1. Media PlayIn the menu, press the or button to select ◄ ►

Photos, then press the ENTER

button.

2. Press the / / / buttons to select a photo in the ﬁle list.◄►▲▼

3. Press the ENTER

button or



(Play) button.

✎NOTE

xWhile a photo list is displayed, press the



(Play) / ENTER

button on the remote control to start a slide show.

xAll files in the file list section will be displayed in the slide show.

xDuring the slide show, files are displayed in order.

xDuring the slide show, you can adjust the slide show speed

using (π) (REW) or ( ) (FF) button.µ

xYou can move to other files using or ◄ ► button.

✎Media Play can play Music files automatically during a Slide

Show if is set to .Background Music On

✎You cannot change the Mode in Background Music until the

Background Music file has finished loading.

ySupported Photo Formats

Image Photo Resolution

JPEG Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

yCMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo ﬁles

1. On the File List screen, highlight a ﬁle, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple ﬁles.

✎NOTE

mark appears to the left of the selected files.

xTo cancel a selection, press the Yellow button again.

xTo deselect all selected files, press the TOOLS button, select

Deselect All, and then the ENTER

button.

3. Press the button, select and TOOLS Play Selected Contents,

then press the ENTER

button.

■

Playing a video/music/photo folder

1. With the folders on your USB device displayed, use the

◄►▲▼/ / / buttons to highlight a folder.

2. Play Folder,Press the TOOLS button, select and then press the

ENTER

button.

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Flickering and Dimming If your Samsung Television is ﬂickering or dimming sporadically, you may need to disable some of its energy efﬁcient

features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these

features off or on.

yEnergy saving Menu Setup Eco Solution Energy Saving : → → → →Select Settings

yEco Sensor : Menu Setup Eco Solution Eco Sensor → → → →Select Settings

Component Connections /

Screen Color

If you ﬁnd that the color on your Samsung television’s screen is not correct or black and white, ﬁrst run a Self

Diagnosis Test on the TV to make sure there are no device issues.

ySelf Diagnosis User Menu Support Self Diagnosis Picture Test : → → →

yIf the test is ok, try making sure ;

yYour connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

yTry making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

you should check before calling for a repair.

yBacklight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to “Picture” in the Menu, and then try

adjusting these options.

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on

knowing that it will turn off after a certain period of time and not waste energy.

ySleep Timer : User Menu → → → Setup Time Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

yNo Signal Power Off : User Menu → → → Setup Eco Solution No Signal Power

yAuto Power Off : User Menu → → → Setup Eco Solution Auto Power Off

Trouble Powering On Before you turn the TV on, ﬁnd the red light on the right or left bottom of your TV. Press the power on button

on the TV or remote and the light should blink about 5 times before the TV turns on.

If you ﬁnd that you are having trouble powering on your Samsung television, there are a number of things to check it

before making a call to the service department.

yIf you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your

keyboard or move the mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Stand Assembly If you have any trouble assembling the stand, refer to “Install the Stand” in the Start Up or Stand Installation Guide.•

Cannot ﬁnd a channel Re-run Plug & Play or run Auto Program. (go to - • MENU Channel - Auto Program)

Poor Picture Picture TestFirst, perform the and to see if your TV is displaying the test image properly.

Go to - MENU Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as

it did in the store.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

deliver HD (high deﬁnition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after running Auto Program.

✎Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up

scaled SD content is low.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks. •

Incorrect or loose connections may cause color problems or a blank screen.

There is poor color or brightness. Adjust the Picture options in the TV menu. (go to • Picture Mode / Color / Brightness / Sharpness)

• Adjust the option in the TV menu. (go to Energy Saving MENU - Setup - - Eco Solution Energy Saving )

• Try resetting the picture to the default picture settings. (go to - - MENU Picture Picture Reset)

There is a dotted line on the edge of

the screen.

• If the picture size is set to , change it to 16:9.Screen Fit

• Change the cable/satellite box resolution.

The picture is black and white. If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1 •

on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

• If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It

may take up to 20 minutes)

• Set the output resolution of the cable box to 1080i or 720p.

Sound Problems Sound TestPerform the to conﬁrm that your TV audio is properly operating.

(go to - MENU Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may be caused by the source or signal.

There is no sound or the sound is too

low at maximum volume.

• Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

The picture is good, but there is no

sound.

• If you are using an external device, check the device’s audio output option Ex. you may need to change your

cable box’s audio option to HDMI if the box is connected to your TV using an HDMI cable.

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. Make sure the AC power cord is securely plugged into the wall outlet and the TV.•

• Make sure the wall outlet is working.

• Try pressing the button on the TV to make sure the problem is not the remote. POWER

If the TV turns on, refer to ‘Remote control does not work’ below.

The TV turns off automatically. Ensure the is set to in the menu.• Sleep Timer Off Time

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged securely into the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

There is no picture/video. Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).•

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

RF (Cable/Antenna) Connection

The TV is not receiving all channels. Make sure the coaxial cable is connected securely.•

• Run Auto Program to add available channels to the channel list.

go to - then select and make sure the correct Cable TV signal type is set MENU Channel - Auto program Auto

in the menu. There are 3 options. ( and STD HRC, IRC)

• Verify the antenna is positioned correctly.

No Caption on digital channels. Check the Caption Setup menu. Try changing to • Caption Mode Service 1 CC1.

• Some channels may not have caption data.

The picture is distorted: macroblock,

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in

sports and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen. HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.•

• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the

TV.

• Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work. Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .•

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

the SAMSUNG TV code.

A “ ” message Mode Not Supported

appears.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

resolution settings in this manual.

Caption on the TV menu is greyed out. • You cannot select in the TV menu when watching content from a device connected via HDMI or Caption

Component.

• Caption must be activated on the external device.

There is a plastic smell from the TV. This smell is normal and will dissipate in a few days.•

TV Signal Strength is unavailable in the

Self Diagnosis Test menu.

• This function is only available for digital channels received through an Antenna / RF/Coax connection.

TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.•

The Channel menu is grey out

(unavailable).

• The Channel menu is only available when you select the TV source.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• If TV is in the mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo

Store Demo Home Use Plug & Play mode to mode using the procedure. Press the button to select SOURCE

TV Setup mode, go to MENU → →Plug & Play → ENTER

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree

connectors.

You see small particles when you look

closely at the edge of the frame of

the TV.

• This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears

on the screen.

• Select Home Use Plug & Play Plug & Play under mode. For details, refer to (Initial Setup).

✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎Watch these troubleshooting on video at www.samsung.com/spsn.

✎Some functions and pictures shown in this manual are available on specific models only.

✎You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com

→ → Support ). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, Downloads

insert the USB memory stick into the T V's USB slot, and then select Support > Software Upgrade in the TV's menu.

Storage and Maintenance

✎If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching

the TV.

✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using

a soft cloth to prevent scratches.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, ﬁre, or

electric shock.

Clean the product with a soft cloth

dampened with in a small amount of

water. Do not use a ﬂammable liquid

(e.g. benzene, thinners) or a cleaning

agent.

License

TheaterSound, SRS and the symbol are

trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under

licence from SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive

surround sound experience from the TV's built-in

speakers, while maintaining steady volume and

delivering rich bass and clear dialog.

DivX Certiﬁed® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofﬁcial DivX

Certiﬁed® device that plays DivX video. Visit divx. com for more information and software tools to convert your ﬁles into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be registered in order to play purchased DivX Video-on-

Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.

com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673;

7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries

and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and

worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered

Rights Reserved.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License

Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

■

This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation ﬁles (the "Software"), to deal in the Software

without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to

whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the

above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT

HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY

DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software

without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

- 10 -- 9 -

- 14-- 13 -

- 11 -

- 15 -

- 12 -

- 16 -

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device

used to physically ﬁx the system when using it in a public place.

Refer to the manual provided with the Kensington Lock for additional

information on proper use.

✎Please find a “

” icon on the rear of the TV. The Kensington

slot is beside the “

” icon.

✎The position and color may differ depending on the model.

Assembling the Wire Holder stand

Display Modes (HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

Mode Resolution Horizontal

Frequency (KHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

IBM 640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 720 45.000 60.000 74.250 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 65.290 59.954 146.250 -/+

1920 x 1080 67.500 60.000 148.500 +/+

Speciﬁcations

Environmental

Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

Model Name UN40ES6003 UN46ES6003 UN55ES6003 UN60ES6003

Display Resolution 1920 x 1080

Screen Size

(Diagonal)

40" Class

(40.0" measured diagonally)

46" Class

(45.9" measured diagonally)

55" Class

(54.6" measured diagonally)

60" Class

(60.0" measured diagonally)

Sound

Output 10W x 2

Dimensions (W x H x D)

Body

With stand

36.4 x 21.7 x 1.8 inches

(926.8 x 553.4 x 46.9 mm)

36.4 x 24.3 x 9.5 inches

(926.8 x 619.1 x 241.3 mm)

41.8 x 24.7 x 1.8 inches

(1062.2 x 629.8 x 46.9 mm)

41.8 x 27.5 x 10.8 inches

(1062.2 x 700.8 x 276.6 mm)

49.3 x 29.0 x 1.8 inches

(1252.8 x 736.6 x 46.9 mm)

49.3 x 31.7 x 10.8 inches

(1252.8 x 807.6 x 276.6 mm)

54.0 x 31.6 x 1.8 inches

(1372.9 x 804.1 x 46.9 mm)

54.0 x 34.4 x 12.1 inches

(1372.9 x 875.3 x 309.6 mm)

Weight

Without Stand

With Stand

22.7 lbs (10.3 kg)

25.5 lbs (11.6 kg)

28.4 lbs (12.9 kg)

32.4 lbs (14.7 kg)

35.7 lbs (16.2 kg)

39.6 lbs (18.0 kg)

43.4 lbs (19.7 kg)

50.7 lbs (23.0 kg)

✎Design and specifications are subject to change without prior notice.

✎This device is a Class B digital apparatus.

✎For information about power supply, and more about power consumption, refer to the label attached to the

product.

✎Typical power consumption is measured according to Energy Star Program requirements for Televisions.

✎Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our

website: www.samsung.com/recyclingdirect or call, (877) 278-0799.

■

JACK PANEL DETAIL / REAR VIEW

(Unit:

inches

)

Model name 1 2 3 4 5 6

UN40ES6003

7.8 7.8 24.2 2.0 6.5 4.1

UN46ES6003

15.7 15.7 29.9 1.8 8.0 5.6

UN55ES6003

15.7 15.7 36.1 2.7 8.4 9.4

UN60ES6003

15.7 15.7 38.5 5.1 9.7 10.7

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions

prior to performing installation of your TV. Not responsible for typographical or printed errors.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the button.TOOLS

Category Operation Videos Music Photos

Title You can select another video ﬁle

to play directly.

Repeat Mode You can play movie and music

ﬁles repeatedly.

c c

Picture Size You can adjust the picture size to

your preference.

Picture Mode You can adjust the picture setting.

c c

Auto Motion

Plus

You can enhance motion in fast

moving scenes.

Sound Mode You can adjust the sound setting.

ccc

Subtitle

Setting

You can play the video with

Subtitles. This function only works

if the subtitles have the same ﬁle

name as the video.

Audio Format You can select the digital audio

output format.

Audio

Language

You can change the audio

language if the video has more

than one language.

Stop Slide

Show /

Start Slide

Show

You can start or stop a Slide

Show.

Slide Show

Speed

You can select the slide show

speed during the slide show.

Background

Music

You can set and select

background music when

watching a Slide Show.

Zoom You can zoom into images in full

screen mode.

Rotate You can rotate images in full

screen mode.

Information You can see detailed information

about the played ﬁle.

ccc

Settings

Using the Setup Menu

■

DivX® Video On Demand : Shows the registration code

authorized for the TV. If you connect to the DivX web site and

the VOD activation ﬁle. Once you play it using Media Play, the

registration is completed.

✎For more information on DivX® VOD, visit “http://vod.divx.

com”.

■

Information: Select to view information about the connected

USB device.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.

For detailed information about installing the wall mount, see

the instructions provided with the wall mount items. Contact a

technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the wall

mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor.

When attaching to other building materials, please contact your

nearest dealer. If you install the TV on a ceiling or slanted wall, it

may fall and result in severe personal injury.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table

below.

xWhen purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard

screw specifications.

xDo not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

xFor wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ

depending on the wall mount specifications.

xDo not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

xSamsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

xDo not mount the TV at more than a 15 degree tilt.

xAlways have two people mount the TV on a wall.

Product

Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw Quantity

LED-TV

19~22 75 X 75

26 100 X 100

32~40 M6200 X 200

46~60 M8400 X 400

Do not install your Wall Mount Kit while

your TV is turned on. It may result in

personal injury due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause

the TV to fall. In particular, ensure that your children do not

hang over or destabilize the TV; doing so may cause the TV

to tip over, resulting in serious injuries or death. Follow all

safety precautions provided on the included Safety Flyer. For

added stability, install the anti-fall device for safety purposes,

as follows.

To prevent the TV from falling

✎Since the necessary brackets, screws, and string or cable are

not supplied, please purchase these separately.

1. Insert the screws into the wall brackets and ﬁrmly fasten them to

the wall. Make sure the screws are ﬁrmly ﬁxed to the wall.

✎We strongly recommend you drive the screws into a stud.

2. Using screws, insert the screws through the TV brackets, and

then fasten the screws to the top VESA screw holes on the back

of the TV.

3. Connect the brackets on the TV and the brackets on the wall

with a strong string or cable, and then tie the string or cable

tightly to the brackets.

✎Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

professional installer.

✎Install the TV close to the wall so that it does not fall.

✎Connect the string or cable so that the brackets on the wall

are at the same height or lower than the brackets on the T V.

Untie the string or cable before moving the TV.

✎To purcase a TV Holder kit, contact Samsung customer care.

Produktspezifikationen

Marke:	Samsung
Kategorie:	Fernsehen
Modell:	UN55ES6003F

Brauchst du Hilfe?

Wenn Sie Hilfe mit Samsung UN55ES6003F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fernsehen Samsung

Samsung QN85QN800AF Bedienungsanleitung

16 Oktober 2024

Samsung UA70RU7200K Bedienungsanleitung

13 Oktober 2024

Samsung UN55F7100AF Bedienungsanleitung

13 Oktober 2024

Samsung UE65TU7022KXXH Bedienungsanleitung

12 Oktober 2024

Samsung LN22A330 Bedienungsanleitung

11 Oktober 2024

Samsung QN75QN90AAF Bedienungsanleitung

9 Oktober 2024

Samsung SyncMaster 731BA Bedienungsanleitung

8 Oktober 2024

Samsung UN46ES6003F Bedienungsanleitung

4 Oktober 2024

Samsung Crystal UHD 85AU8000 Bedienungsanleitung

4 Oktober 2024

Samsung QE55LST7TCUXXN Bedienungsanleitung

3 Oktober 2024

Bedienungsanleitung Fernsehen

Neueste Bedienungsanleitung für -Kategorien-

Sony KE-65A8 Bedienungsanleitung

16 Oktober 2024

Thomson 24TM2490 Bedienungsanleitung

16 Oktober 2024

Daewoo DSJ-5520 Bedienungsanleitung

15 Oktober 2024

Sharp LC-52D65U Bedienungsanleitung

15 Oktober 2024

Hisense 50A7100FTUK Bedienungsanleitung

15 Oktober 2024

Salora LCD 1941 DVX Bedienungsanleitung

15 Oktober 2024

Grundig 65 CUA 7390 Mailand Bedienungsanleitung

15 Oktober 2024

Grundig 50 GUB 6300 Bedienungsanleitung

15 Oktober 2024

Grundig 40 CFA 6490 Venedig Bedienungsanleitung

15 Oktober 2024

Grundig 55 GOB 9480 Bedienungsanleitung

15 Oktober 2024