Samsung UN32F5000AF Bedienungsanleitung

Samsung Fernsehen UN32F5000AF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung UN32F5000AF (2 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

defaults.

Channel Menu

Memorizing Channels

If you are not using a cable box or satellite box, when you ﬁrst set up

your TV using , the TV memorized the channels that were Plug & Play

available over the air or through your cable system and added them to

the . The and functions described Channel List Antenna Auto program

below let you re-run the channel memorization function without having to

re-run the procedure.Plug & Play

Antenna (Switch to Cable / Switch to Air

)

Before your television can memorize the available channels, you must

select your TV's signal source, (using an antenna) or . Select Air Cable

Menu > > > or . After you have selected the Channel Antenna Air Cable

signal source, go on to the Auto Program function.

✎Selecting the signal source using the function also Antenna

determines the signal source the TV is tuned to. For example, if you

receive your TV signal over the air, and you select , you will Cable

see only snow. You must select to see a picture.Air

Auto Program

The function memorizes all channels that are available Auto Program

over the air or through your cable system and adds them to the Channel

List.

✎If your TV is connected to a cable box or satellite box, you do not

need to run . You will use the tuner in the box, not the Auto Program

tuner in the TV, to select channels.

To start , follow these steps:Auto Program

1. Push MENU

→Channel →Auto Program →ENTER

on your

remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

Air

If your TV is connected to an antenna choose , and then press Air

ENTER

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose , and then Cable

press ENTER

. Go to Step 3.

Auto

If you choose , and then press Auto ENTER

, the TV will

automatically select the correct Antenna source. Go to Step 3.

3. On the Cable Type screen, use the buttons to select the ◄/►/▲/▼

type of digital and analog cable systems you have: , , or STD HRC

IRC STD Start. Most systems are (Standard). When done, select ,

and then press ENTER

. The TV will start memorizing channels.

✎Channel memorization can take up to 45 minutes, depending on

your cable system.

✎Memorized channels are added to the list. These Added Channels

are the channels you will see when you use the Channel buttons on

your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after is Auto Program

completed. This process may take 20~30 minutes.

✎Press the ENTER

button to stop . Clear Scrambled Channel

✎This function is only available in mode. Cable

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've

scheduled for viewing. Add or delete Favorite channels, add or delete

channels from the list, schedule channels or programs Added Channels

for viewing. Select a channel to watch on the , All Channels Added

Channels Favorite, or screen by pressing the buttons, and then ▲/▼

pressing the ENTER

button.

✎If you use a cable box or satellite box, you cannot use the Channel

List functions.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air Zoom Select ''T Tools ► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the buttons to view each list.▲/▼

■

All Channels: Shows all currently available channels including

those you deleted from the list.Added Channels

■

Added Channels: Shows all Added Channels. These are the

channels that appear when you press the button.CH

■*

Favorite: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

scheduled using .Timer Viewing

✎Remote control buttons active on the screen.Channel List

xGreen ( ): Enlarges or shrinks a channel number.Zoom

xYellow ( ): Move the cursor to a channel. Press the Yellow Select

button to select the channel. A

mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

(Tools Channel List): Displays the Tools menu. (The Tools

menus may differ depending on the situation.)

x► ( ): Displays next programs. Next Program

Display Icons Used in the Channel List Screens

Icons Meaning

A selected channel.

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

The Channel List Tools Menu

OChannel List →

The Channel List Tools menu contains most of the functions you can use

on the , , and List screens. To All Channel Added Channels Favorite

view, select a list screen, select a channel, and then press the TOOLS

button.

■

Add / Delete Added : Delete a channel from or add a channel to the

Channels list.

To delete channels from the list, follow these steps:Added Channels

1. Added ChannelsSelect one or more channels in the list using the

▲/▼ buttons and the Yellow ( ) button on your remote.Select

2. Press the TOOLS button on your remote. The Tools menu appears.

3. DeleteSelect in the Tools menu, and then press the ENTER

button.

✎You can adjust and store settings for each external device you have

connected to an input on the TV. Picture Sizes available by Input

Source are listed below:

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1,

Zoom2, 4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9, Wide Fit, 4:3,

Screen Fit

■

Digital Clean View: If the broadcast signal received by your TV is

weak, you can activate the feature to reduce any Digital Clean View

static and ghosting that may appear on the screen.

✎When the signal is weak, try all the options until Digital Clean View

the TV displays the best picture.

■

MPEG Noise Filter: Reduces MPEG noise to provide improved

picture quality.

■

HDMI Black Level: For HDMI signals, select the black level to adjust

the screen depth. Low make blacks look darker.

✎Available only in mode (RGB signals).HDMI

■

Film Mode: Sets the TV to automatically sense and process ﬁlm

signals from all sources and adjusts the picture for optimum quality.

✎Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■

LED Clear Motion: Removes drag from fast scenes with a lot of

movement to provide a clear picture.

Picture Reset

Resets the picture settings to their factory defaults.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■

Balance L/R: Adjusts the balance between the right and left speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the loudness of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

DTS TruSurround

Available in sound mode only.Standard

DTS TruSurround is a patented DTS technology that solves the problem

of playing 5.1 multichannel content through two speakers. TruSurround

delivers a compelling, virtual surround sound experience through any

two-speaker playback system, including internal television speakers. It is

fully compatible with all multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for

example, simultaneous translations of a program into foreign languages).

✎You can only select a language from among the ones being

broadcast.

Multi-Track Sound

Analog channels only.

■

Mono: Select for channels that are broadcasting in mono or if you are

having difﬁculty receiving a stereo signal.

■

Stereo: Select for channels that are broadcasting in stereo.

■

SAP: Select to listen to the Separate Audio Program, which is usually

a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono, Stereo SAP or .

Auto Volume

Because each station has its own broadcasting conditions, the

volume may ﬂuctuate each time you change the channel. This feature

automatically adjusts the volume of a channel by lowering the sound

output when the modulation signal is high or by raising the sound output

when the modulation signal is low.

SPDIF Output for 32" and above models

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the back

of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output format may differ depending

on the input source.

✎By connecting the TV to a receiver or home theater with Dolby

Digital Dolby Digital and 5.1ch speakers and selecting , you can

maximize your interactive 3D sound experience.

■

Audio Delay: Lets you correct timing mismatches between the audio

track and the video when you are watching the TV and listening to

digital audio output from the TV through an external device such as

an AV receiver. When you select , a slider appears. Use Audio Delay

the left and right arrow buttons to adjust the slider. Press ENTER

when done (0ms ~ 250ms).

Speaker Select

If you are listening to the sound track of a broadcast or movie through an

external receiver, you may hear a sound echo caused by the difference in

decoding speed between the TV’s speakers and the speakers attached

to your audio receiver. If this occurs, set the TV to .External Speaker

✎When you set to , the TV’s Speaker Select External Speaker

speakers are turned off. You will hear sound through the external

speakers only. When you set to both Speaker Select TV Speaker

the TV’s speakers and the external speakers are on. You will hear

sound through both.

✎When is set to , the Speaker Select External Speaker VOLUME

and buttons will not operate and the sound settings will be MUTE

limited.

✎If there is no video signal, both the TV’s speakers and the external

speakers will be mute.

Visual Impaired

Digital channels only.

Adds verbal description to the main audio to help the visually impaired.

Sound Reset

Resets all sound settings to the factory

To add channels to the list, follow these steps:Added Channels

1. All ChannelsSelect one or more channels in the list using the ▲/▼

buttons and the Yellow ( ) button on your remote.Select

2. Press the TOOLS button on your remote. The Tools menu appears.

3. AddSelect in the Tools menu, and then press the ENTER

button.

✎All deleted channels are shown on the list. You add All Channels

channels back to the list on the list.Added Channels All Channels

✎A gray-colored channel indicates the channel has been deleted from

the list. Added Channels

✎The menu option only appears for deleted channels.Add

■

Add to Favorite /Delete from Favorite

: Lets you add

channels to and delete channels from your list.Favorites

To add channels to the list, follow these steps:Favorites

1. All ChannelsSelect one or more channels in the list using the ▲/▼

buttons and the Yellow ( ) button on your remote.Select

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Add to FavoriteSelect in the Tools menu, and then press the

ENTER

button.

To delete channels from the list, follow these steps:Favorites

1. FavoriteSelect one or more channels in the Channels list using the

▲/▼ buttons and the Yellow ( ) button on your remote.Select

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Delete from FavoriteSelect in the Tools menu, and then press the

ENTER

button.

■

Timer Viewing: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time ﬁrst in the > Time Clock

function to use .Time Viewing

To schedule a channel, follow these steps:

1. Added ChannelsSelect a channel in the list using the buttons ▲/▼

and the Yellow ( ) button on your remote.Select

2. Press the TOOLS button on your remote. The Tools menu appears.

3. Time ViewingSelect in the Tools menu, and then press the

ENTER

button. The Time Viewing screen appears.

Antenna Channel Repeat

▲

DTV Air 6-1 Once

▼

Move

Adjust

Enter

Return

Timer Viewing

Date Start Time

01-01-2013 12 : 01 am

4. Use the buttons to move from entry ﬁeld to entry ﬁeld and the ◄/►

▲/▼ buttons to change the entries. Where numbers are displayed,

you can also enter numbers directly using the number keypad on

your remote.

✎If you select or , the date you select in the Everyday Every Week

Date field becomes the start date for your scheduled viewing.

For , the TV will turn on every day, at the time you Everyday

selected, starting from that date. For , the TV will turn Everyweek

on every week, on the same day of the week as the start date

you selected, at the time you selected, from that day on. If you

select , the TV will turn on once, on the date and time you Once

selected.

5. Press the ENTER

button on your remote when done.

✎Only can be scheduled.Added Channels

✎Scheduled programs and channels are displayed in the

Programmed List.

✎When you select a digital channel, press the button to view the ►

digital program list. If you highlight a program in the list, and then

press the ENTER

( ) button, you set for Schedule Timer Viewing

that program directly.

■

Channel Name Edit: Analog channels only. Lets you assign a name

of up to ﬁve characters to an analog channel. For example, Hist,

Food, Golf, etc. This makes it easier to ﬁnd and select a channel.

■

Deselect All: Deselect all the selected displayed channels.

✎You can only select when one or more channels are Deselect All

selected.

■

Select All: Select all the channels in the displayed channel list.

■

Auto Program Auto Program: See under Memorizing Channels.

Programmed List (on the Channel List Screen)

The list displays the channels and programs you have Programmed

scheduled for viewing using the function. You can view, Time Viewing

modify, or delete a show you have scheduled using the functions on the

Programmed List screen Tools menu.

Programmed List Screen Tools Menu

OChannel List Programmed → →

■

Change Info: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1. Programmed Channel ListSelect the List icon on the left side of the

screen, and then press the ENTER

button.

2. ProgrammedOn the List screen, select the show or channel entry

you want to change, and then press the button. The Tools TOOLS

Menu appears.

3. Change InfoSelect , and then press the ENTER

button. The

Time Viewing screen appears.

4. Use the buttons to move from entry ﬁeld to entry ﬁeld and the ◄/►

▲/▼ buttons to change the entries. Where numbers are displayed,

you can also enter numbers directly using the number keypad on

your remote.

Press the ENTER

button when done.

■

Cancel Schedules: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Programmed Channel ListSelect the List icon on the left side of the

screen, and then press the ENTER

button.

2. ProgrammedOn the List screen, select the show or channel entry

you want to cancel, and then press the button. The Tools TOOLS

Menu appears.

3. Cancel SchedulesSelect , and then press the ENTER

button.

The screen appears.Cancel Schedule

4. OKSelect , and then press the ENTER

button.

■

Information: Display the information for a show or channel you have

scheduled. You can also change the schedule Information.

1. Programmed Channel Select the List icon on the left side of the

List screen, and then press the ENTER

button.

2. ProgrammedOn the List screen, select the show or channel entry

you want information for, and then press the button. The TOOLS

Tools Menu appears.

3. Select Information, and then press the ENTER

button. The

Timer Viewing Info screen appears.

4. Change InfoSelect and press the ENTER

button to change

information, or select Close and press the ENTER

button to

close the Information screen.

■

Select All / Deselect All: You can select or deselect all channels in

the channel list.

Other Channel Menu Functions

Channel Mode

Lets you select the channel list displayed when you press the

(Channel) button on your remote. For example, if you select Favorite

Channels, you will only see Favorite channels when you press the

button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel, as

this is done automatically during the search and store operation. If the

signal is weak or distorted, ﬁne tune the channel manually.

✎Select the channel, and then select Fine Tune.

✎Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎To reset fine-tuning, select the channel, select Fine Tune, and then

select on the Reset Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the initial setup procedure. Plug & Play

Language

Set the menu language.

✎Choose between , and .English Español, Français

Setting the Time

Time

✎The time you set will appear when you press the button.INFO

■

Clock: Set the clock so you can use the various timer features of

the TV.

✎If you disconnect the power cord, you have to set the clock again.

To set the clock, follow these steps:

1. Setup Time ClockSelect > > .

2. Press ENTER

and select or , and then press Auto Manual

ENTER

again.

If you selected Auto:

The TV will automatically download the correct time from a digital

channel.

ySelect , and then press the Time Zone ENTER

button. Use

the buttons to select your , and then press ▲/▼ Time Zone

ENTER

ySelect DST (Daylight Savings Time), and then press ENTER

Select if you want to turn the adjustment on and off On DST

manually. Select to turn off the adjustment. Select if Off DST Auto

you want the TV to adjust to automatically. Press DST ENTER

when done.

✎DST Time Zone Clock and function are only available when the

Mode Auto is set to .

If you selected Manual:

The screen appears. Use the buttons to change the Clock Set ▲/▼

values in each ﬁeld or use the number buttons to enter the values

directly. Use the buttons to move from ﬁeld to ﬁeld. When done ◄/►

with all the ﬁelds, press ENTER

✎Available only when is set to .Clock Mode Manual

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60,

90, 120, 150 and 180 minutes).

✎To cancel the , select .Sleep Timer Off

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You

can set three different on/off timer settings.

✎You must set the clock first.

■

On Time / Off Time: Set the hour, minute, am/pm, and Activate/

Inactivate ﬁelds for and . Use the buttons to On Time Off Time ◄/►

move from ﬁeld to ﬁeld. Use the buttons to change the values ▲/▼

in each ﬁeld. To activate the timer with the setting you have chosen,

set the Activate/Inactivate ﬁeld to .Activate

■

Volume: Set the desired loudness.

■

Contents: To select what will be turned on when the timer setting is

activated. You can set the TV to turn on a speciﬁc channel or play

back contents such as photo or audio ﬁles. Use the buttons to ◄/►

move to the Contents ﬁeld, and then press the ENTER

button.

The Contents screen appears. Use the buttons to move from ◄/►

ﬁeld to ﬁeld. Use the buttons to change the values in each ﬁeld.▲/▼

- TV/USB: Select or . The USB device must be connected TV USB

to your TV before you can select USB.

- Antenna Air Cable: Displays the current antenna source, or .

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on the

USB device:

✎The maximum number of files the TV can display, including sub

folders, in one folder of a USB storage device is 2000.

✎The media may not play smoothly if you use a USB device rated

lower than USB 2.0.

1. MusicUse the buttons to move to the ﬁeld under ◄/► or the

ﬁeld under , and then press the Photo ENTER

button. The TV

displays a single folder (the Root folder) and the type or name of the

device.

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various Tools

menus. The Main menu gives you access to most or all of the menu

options available on your TV. The Tools menus display a selected number

of frequently used menu options that change depending on the screen

you are viewing. A Tools menu symbol (

) in the lower right side of the

screen indicates that a Tools menu is available.

The Main menu has seven primary categories:

yPicture ySound yChannel ySetup

yInput yApplication ySupport

To view the Main menu, press the button on your remote. To view MENU

a Tools menu, press the button on your remote.TOOLS

✎The menu options that appear in the Main menu depend on the

Source you have selected. For example, if you have selected the

HDMI source, the Channel category will not appear. To see the

Channel category, you must first select TV in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol (

) next to an option name

indicates the option is also available in one of the Tools menus.

Picture Menu

Mode

Select your preferred picture mode.

✎When your TV is connected to a PC, you can only select Entertain

and .Standard

■

Dynamic: Brightens the screen. Suitable for a bright room.

■

Standard: Suitable for a normal room brightness.

■

Movie: Darkens the screen, making it less glary. Suitable for watching

movies in a darkened room.

■

Entertain: Sharpens the picture. Suitable for games.

✎Only available when the is connected to a .TV PC

Samsung MagicAngle for 19", 22" models

Adjust screen viewing Angle to optimize screen quality according to your

viewing position.

■

Samsung MagicAngle: When viewing the screen at an angle from

below or above by setting the appropriate mode for each position you

can obtain a similar picture quality as viewing the screen directly from

the front.

Off: Select when viewing from the front position.

Lean Back Mode: Select when viewing from a slightly lower position.

Standing Mode: Select when viewing from the upper position.

■

Mode: Adjust screen viewing angle.

✎When is set to or Samsung MagicAngle Lean Back Mode

Standing Mode Gamma, is not available.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast: Increases or decreases the contrast between dark and light

areas of the picture.

■

Brightness: Adjusts the brightness of the screen. Not as effective as

Backlight.

■

Sharpness: Sharpens or dulls the edges of objects.

■

Color: Adjusts the color saturation. The higher the Color setting, the

more intense the color. Low settings remove color and the picture

becomes black, white, and gray.

■

Tint: Adjusts the amount of green and red in the picture. As you

increase the amount of green, the amount of red decreases and vice

versa.

✎When the TV is connected to a PC, you can only make changes to

Backlight, Contrast, Brightness, Sharpness.and

Advanced Settings

Available in and mode only.Standard Movie

Compared to previous models, new Samsung TVs offer a more precise

picture with more precise controls.

✎When your TV is connected to a PC, you can only make changes to

Gamma White Balance and .

■

Dynamic Contrast: Adjusts the screen contrast.

■

Black Tone: Selects the black level to adjust the screen depth. Darker

settings make blacks look darker.

■

Flesh Tone: Adjusts the amount of red in skin tones.

■

Color Space: Auto automatically matches the range of colors (the

variety and number of colors) available to create pictures with the

color range of the video source. Native provides a color range wider

than the color range of the video source.

■

White Balance: Adjusts the color temperature of the picture so that

white objects look white (instead of, for example, slightly pink or

slightly yellow) and the overall color of the picture looks natural.

R-Offset / G-Offset / B-Offset: Adjusts how dark each color (red,

green, blue) is.

R-Gain / G-Gain / B-Gain: Adjusts how bright each color (red, green,

blue) is.

Reset White Balance: Resets the to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Motion Lighting: When on, the TV automatically adjusts the

brightness of the screen in response to the brightness of the room. In

bright light, the screen brightens. In dim light, the screen dims.

✎Available in mode only.Standard

Picture Options

✎When the TV is connected to a PC, you can only make changes to

the Color Tone Size HDMI Black Level, , and .

■

Color Tone: Cool makes the picture bluer (cooler). Warm 1 and Warm

2 make the picture redder (warmer).

✎Warm1 Warm2 and are deactivated when the picture mode is set

to .Dynamic

■

Size: Set the size and aspect ratio of the picture on the screen. Your

cable box or satellite receiver may have its own set of screen sizes

as well. However, we highly recommend you use the TVs 16:9 mode

most of the time.

16:9: Sets the picture to the 16:9 wide screen format.

Zoom1: Provides moderate magniﬁcation of the picture. Sides, top,

and bottom are cut off.

Zoom2: Provides larger magniﬁcation of the picture. Sides, top, and

bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture ﬁts

the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎Do not watch your TV in the 4:3 format for a long time. Traces of

borders displayed on the left, right and center of the screen may

cause image retention (screen burn) which is not covered by the

warranty.

Screen Fit: Displays the full image without any cut-off when your TV is

inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

HD signals.

✎HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

2. Press the ENTER

button. A list of folders on the device appears.

✎If there are no folders on your device, press the Yellow ( ) Select

button to select the Root folder, and then press the RETURN

button. The Timer screen re-appears.

3. Use the buttons to highlight a folder that contains music or ▲/▼

photos, and then press the Yellow ( ) button to select the folder.Select

4. Press the RETURN button. The Timer screen re-appears.

■

Repeat Once Everyday Mon~Fri Mon~Sat Sat~Sun: Select , , , , or

Manual Manual. If you select , you can select the days you want to

activate the timer by using the buttons to highlight the day, and ◄/►

then pressing the ENTER

button. To unselect a day, highlight it,

and then press the ENTER

button.

When you are ﬁnished making all your selections on the Timer screen,

press either the ENTER

or button.RETURN

Other Features

Game Mode

When you connect a game console such as a PlayStation™ or Xbox™

to your TV, you can enjoy a more realistic gaming experience by turning

on the function.Game Mode

✎Precautions and limitations for game mode:

xBefore you disconnect the game console and connect another

external device, set to in the setup menu.Game Mode Off

xIf you display the TV menu in , the screen shakes Game Mode

slightly.

xGame Mode TV is not available when the input source is set to .

xAfter connecting the game console, set to . You Game Mode On

may notice slightly reduced picture quality.

Program Rating Lock

The feature lets you block programs you've Program Rating Lock

determined are inappropriate for your children based on the program's

ratings. To access the feature and make any Program Rating Lock

changes, you must enter a PIN (personal identiﬁcation number). To

watch a blocked program, you must also enter the same PIN.

✎Program Rating Lock HDMI Component is not available in or

mode.

✎The default PIN number of a new TV set is “0-0-0-0”. You can set

your own PIN using the function.Change PIN

How It Works

When you access the Menu functions for the Program Rating Lock

ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen

closes and the Menu appears. Every time you Program Rating Lock

access the functions, the PIN screen will appear Program Rating Lock

and you must enter a PIN.

When the screen appears, select Program Rating Lock Program

Rating Lock, and then press ENTER

. Select , and then press the On

ENTER

key again. Depending on what type of programs or movies

you want to block, select one of the options on the screen, and then

press the ENTER

button. The options are listed below:

■

TV Parental Guidelines: You can block TV programs based on their

ratings. This function allows you to control what your children are

watching.

■

MPAA Rating: You can block movies based on their MPAA ratings.

The Motion Picture Association of America (MPAA) has implemented

a rating system that provides parents or guardians with advanced

information on which ﬁlms are appropriate for children.

■

Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French: You can block TV programs based on their French

Canadian ratings.

■

Downloadable U.S. Rating: You can use parental restriction

information while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way

for each option. Each option displays a grid or table. All the tables have

ratings listed on the left. The TV Parental Guidelines option also has

kinds of content listed across the top: : Lock all TV ratings. / : ALL FV

Fantasy violence / : Violence / : Sexual situation / : Adult Language / V S L

D: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display locks.

You can also Allow All or Lock All. When done, press the RETURN

button on your remote.

■

Change PIN: The Change PIN screen will appear. Choose any 4

digits for your PIN and enter them in ﬁelds. Re-enter Enter New PIN

the same 4 digits in ﬁelds. When the Change PIN Conﬁrm New PIN

screen disappears, press the button. The TV has memorized your OK

new PIN.

✎If you forget the PIN, press the remote-control buttons in the

following sequence, which resets the pin to “0-0-0-0” : (off) POWER

→ →→→→ MUTE 8 2 4 (on)POWER

Caption

(On-Screen Text Dialogue)

■

Caption: You can switch the caption function on or off. If captions are

not available, they will not be displayed on the screen.

✎The feature does not work in or mode.Caption Component HDMI

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel mode

or when a signal is supplied from an external device to the TV.

(Depending on the broadcasting signal, the Analog Caption function

may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital

channels only) The Digital Captions function works with digital

channels.

✎Service1~6 may not be available in digital caption mode depending

on the broadcast.

■

Digital Caption Options: (Digital channels only)

Size: Options include Default, Small, Standard and Large. The default

is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is

Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of

the letters. The default is White.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include

Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent, Solid

and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground

Color, Background Color, Foreground Opacity and Background

Opacity to its default.

✎Digital Caption Options are available only when you can select

Default Service1 ~ Service6 Caption Mode and in .

✎The Foreground and Background cannot be set to the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎The does not play:Melody

xWhen no sound is output from the TV because the button MUTE

has been pressed.

xWhen no sound is output from the TV because the volume has

been reduced to minimum with the button.VOL –

xWhen the TV is turned off by function.Sleep Timer

Eco Solution

■

Energy Saving : Lets you adjust the brightness of the TV to reduce

power consumption. If you select , the screen is turned off, Picture Off

but the sound remains on. Press any button except the volume button

to turn on the screen.

■

Eco Sensor for 5 series : To enhance your power savings, the

picture settings automatically adapt to the light in the room.

✎If you adjust the , the will be set to .Backlight Eco Sensor Off

Min. Backlight Eco Sensor On: When is , the minimum screen

brightness can be adjusted manually.

✎If is , the display brightness may change (become Eco Sensor On

slightly darker in most cases) depending on the surrounding light

intensity.

■

No Signal Power Off: Sets how quickly the TV switches to standby

mode if no picture is being received.

✎Disabled when an attached PC is in power saving mode.

■

Auto Power Off: The TV will automatically turn off when no user

operation is detected for 4 hours.

Auto Protection Time

If a still image remains on the screen for an amount of time you deﬁne,

the screen saver is activated to prevent the formation of ghost images

on the screen.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

appears in the test picture, select and follow the directions on Yes

the screen.

■

Sound Test: Use the built-in melody to check for sound problems.

If the problem occurs during the test, select and follow the Yes

directions on the screen.

■

Signal Strength: (Digital channels only) An HD channel’s reception

quality is either perfect or the channels are unavailable. Adjust your

antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

ﬁrmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can ﬁnd information regarding our call

centers and how to download products and software.

Media Play

Enjoy photos, music and/or movie ﬁles saved on a

USB Mass Storage Class (MSC) device.

MEDIA.P

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie ﬁles to

the jack on the back of the TV. A pop up window appears.USB

3. Press the MEDIA.P button on your remote. The menu Media Play

appears.

Using the Media Play Menu

To open in the Menu, follow these steps:Media Play

1. Application on the left, and then press the ENTER

button.

2. Media Play (USB)Press the or button to select ▲ ▼ , and then

press the ENTER

button.

3. Videos, Music, Photos, Press the or button to select an icon (◄ ►

Settings), and then press the ENTER

button.

✎Media Play might not work properly with unlicensed multimedia

files.

✎Need-to-Know List before using Media Play (USB)

xSupported file systems are FAT and NTFS.

xCertain types of USB Digital camera and audio devices may not

be compatible with this TV.

xMedia Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

xBefore connecting your device to the TV, please back up your files

to protect them from damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

xA USB device that requires high power (more than 0.5A) may not

be supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to

display on the screen.

xIf a file is corrupted or the TV does not support the file type, the

“Not Supported File Format” message appears.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎See the warranty card for more information on warranty terms.

Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of

the screen width to screen height) are primarily designed to display wide

screen format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the

screen if your model offers this feature and the images are constantly

moving. Displaying stationary graphics and images on screen, such as

the dark sidebars on non- expanded standard format television video

and programming, should be limited to no more than 5% of the total

television viewing per week. Additionally, viewing other stationary images

and text such as stock market crawls, video game displays, station

logos, web sites or computer graphics and patterns, should be limited

as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LED Displays

that leave subtle, but permanent burned-in ghost images in the LED

picture. To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark bars.

On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture. Be careful in the selection

and duration of television formats you use for viewing. Uneven LED aging

as a result of format selection and use, as well as burned-in images, are

not covered by your Samsung limited warranty.

ySAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY

STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and

limitations contained herein, SAMSUNG will additionally provide Warranty

Repair Service in the United States on SAMSUNG products purchased

in Canada, and in Canada on SAMSUNG products purchased in the

United States, for the warranty period originally speciﬁed, and to the

Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement and

the Original Limited Warranty Statement, a dated Bill of Sale as Proof

of Purchase must be presented to the Service Center. Transportation

to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material

or workmanship, and only those encountered in normal use of the

product. Exclusions include, but are not limited to, any originally speciﬁed

provisions for in-home or on-site services, minimum or maximum repair

times, exchanges or replacements, accessories, options, upgrades, or

consumables.

For the location of a SAMSUNG Authorized Service Center, please call

toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image

elements (such as TV channel logos, TV shows or movies in panorama

or 4:3 format, stock or news scroll bars, etc.) on the screen. The

constant display of still pictures can cause ghosting or image burn-in

(image retention) on the LED screen, which will affect image quality. To

reduce the risk of this effect, please follow the recommendations below:

yAvoid displaying the same TV channel for long periods.

yAlways try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

yReduce brightness and contrast values to the minimum required to

achieve the desired picture quality. Values that exceed the minimum

may speed up the burn-in process.

yFrequently use all TV features designed to reduce image retention and

screen burn-in. Refer to proper user manual section for details.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please

contact the SAMSUNG customer care center.

Country CANADA U.S.A

Address

Samsung Electronics

Canada Inc.,

Customer Service

55 Standish Court

Mississauga

Ontario L5R 4B2 Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgeﬁeld Park, NJ 07660

Customer Care

Center 1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca

(English)

www.samsung.com/ca_fr

(French)

www.samsung.com

LED TV

user manual

BN68-04801A-01

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

UF4000_5000_ZA_BN68-04801A-ENG_ENG-US.indd 1 2013-01-22  6:49:15

xThe TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billing and settlements.

xPTP devices are not supported.

xIf an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

xIf the TV has no input during the time period set in Auto

Protection Time, the Screensaver will run.

xThe power-saving mode of some external hard disk drives may be

released automatically when you connect them to the TV.

xIf you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the files on the device.

xIf a USB device connected to the TV is not recognized, the list of

files on the device is corrupted, or a file in the list is not played,

connect the USB device to a PC, format the device, and check

the connection.

xIf a file you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the file.

xPhotos only supports the sequential jpeg format.

xThe Videos option does not support the scene search and

thumbnail functions.

xIf the number of files and folders saved on a USB storage device is

over approximately 4000, the files and folders may not appear and

some folders may not open.

xThe maximum number of files the TV can display, including sub

folders, in one folder of a USB storage device is 2000.

xThe media may not play smoothly if you use a USB device rated

lower than USB 2.0.

Videos

1. Media Play VideosIn the menu, press the or button to select ◄ ► ,

and then press the ENTER

button.

2. Press the buttons to select a video in the ﬁle list.◄/►/▲/▼

3. Press the ENTER

button or



(Play) button.

- The file name is displayed on the top of the screen with the playing

time.

- If video time information is unknown, playing time and the progress

bar are not displayed.

- During video playback, you can search using the and ◄ ►

buttons.

✎In this mode, you can play movie clips contained in a game, but you

cannot play the game itself.

ySupported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub Picture FormatAVI

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

ySupported Video Formats

File

Extension Container ResolutionVideo Codec Frame

rate (fps)

Bit rate

(Mbps)

Audio

Codec

*.mp4 MP4

Divx3.11/4.x/

5.1/6.0 1920x1080 6~30 30Mbps

MP3 /

ADPCM /

AAC

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

"*.avi

*.mkv"

"AVI

MKV"

Divx3.11/4.x/

5.1/6.0 1920x1080 6~30 30Mbps "MP3 /

AC3 /

LPCM /

ADPCM

/ DTS

Core"

MPEG4 SP/

ASP 1920x1080 6~30 30Mbps

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

"*.asf

*.wmv" ASF

Divx

3.11/4.x/

5.1/6.0

1920x1080 6~30 30Mbps

"MP3 /

AC3 /

LPCM /

ADPCM

/ WMA

Pro"

MPEG4 SP/

ASP 1920x1080 6~30 30Mbps

H.264 1920x1080 6~30 30Mbps

"*.ts

*.trp

*.tp

*.m2ts"

MPEG2 1920x1080 6~30 30Mbps AC3 /

AAC /

MP3 /

DD+ /

HE-AAC

H. 264 BP/

MP/HP 1920x1080 6~30 30Mbps

"*.dat

*.mpg

*.mpeg

*.vob"

MPEG1 1920x1080 24/25/30 30Mbps AC3 /

MPEG /

LPCM /

AAC

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP/

MP/HP 1920x1080 6~30 30Mbps

*.3gp 3GPP

MPEG4 SP/

ASP 1920x1080 6~30 30Mbps MP3

H.264 1920x1080 6~30 30Mbps

*.ﬂv ﬂash

formats

H.264 1920x1080 6~30 30Mbps

MP3

Sorenson

H.263 1920x1080 6~30 30Mbps

Other Restrictions

yVideo content will not play, or not play correctly, if there is an error in

the content or the container.

ySound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the Supported

Video Formats table.

yIf the Index Table contains an error, the Seek (Jump) function will not

work.

yThe menu may take longer to appear if the video’s bit rate exceeds

10Mbps.

yVideo content may not be play if there is too much content in one ﬁle.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not

supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, and 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel.

(LBR mode of WMA Pro is not supported.)

WMA Lossless is not supported.

Music

1. Media Play MusicIn the menu, press the buttons to select ◄/► ,

and then press the ENTER

button.

2. Press the buttons to select the desired Music in the ﬁle ◄/►/▲/▼

list.

3. Press the ENTER

button or



(Play) button.

✎During music playback, you can search using the buttons.◄/►

✎



(REW) and

(FF) buttons do not function during play.

✎Media Play only displays files with MP3 file extensions. Other file

extensions are not displayed, even if they are saved on the same

USB device.

✎If the sound is abnormal when playing MP3 files, adjust the

Equalizer Sound in the menu. (An over-modulated MP3 file may

cause a sound problem.)

Photos

1. Media Play PhotosIn the menu,, press the or button to select ◄ ► ,

then press the ENTER

button.

2. Press the / / / buttons to select a photo in the ﬁle list.◄►▲▼

3. Press the ENTER

button or



(Play) button.

✎NOTE

xWhile a photo list is displayed, press the



(Play) / ENTER

button on the remote control to start a slide show.

xAll files in the file list section will be displayed in the slide show.

xDuring the slide show, files are displayed in order.

xDuring the slide show, you can adjust the slide show speed using

( ) (REW) or ( ) (FF) button.µ

xYou can move to other files using the or button.◄ ►

xMedia Play can play Music files automatically during a Slide Show

if is set to .Background Music On

xYou cannot change the in until the Mode Background Music

Background Music file has finished loading.

ySupported Photo Formats

Image Photo Resolution

JPEG Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

yCMYK and YCCK color space JPEGs are not supported.

Playing Multiple Files

■

Playing selected video/music/photo ﬁles

1. On the File List screen, highlight a ﬁle, and then press the Yellow

button on your remote.

2. Repeat Step 1 to select multiple ﬁles.

✎NOTE

mark appears to the left of the selected files.

xTo cancel a selection, press the Yellow button again.

xTo deselect all selected files, press the button, select TOOLS

Deselect All, and then the ENTER

button.

3. Play Selected ContentsPress the TOOLS button, select , and then

press the ENTER

button.

■

Playing a video/music/photo folder

1. With the folders on your USB device displayed, use the ◄/►/▲/▼

buttons to highlight a folder.

2. Play FolderPress the TOOLS button, select , and then press the

ENTER

button.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a ﬁle, press the button.TOOLS

Category Operation Videos Music Photos

Title You can select another video ﬁle

to play directly.

Repeat Mode You can play movie and music

ﬁles repeatedly.

c c

Picture Size You can adjust the picture size to

your preference.

Picture Mode You can adjust the picture

setting.

c c

Sound Mode You can adjust the sound setting.

c c c

Subtitle Setting

You can play the video with

Subtitles. This function only

works if the subtitles have the

same ﬁle name as the video.

Audio Format You can select the digital audio

output format.

Audio Language

You can change the audio

language if the video has more

than one language.

Stop Slide Show /

Start Slide Show

You can start or stop a Slide

Show.

Slide Show Speed You can select the slide show

speed during the slide show.

Background Music

You can set and select

background music when

watching a Slide Show.

Zoom You can zoom into images in full

screen mode.

Rotate You can rotate images in full

screen mode.

Information You can see detailed information

about the played ﬁle.

c c c

Settings

Using the Setup Menu

■

DivX® Video On Demand : Shows the registration code authorized

for the TV. If you connect to the DivX web site and register with the

10-digit registration code, you can download the VOD activation ﬁle.

Once you run the ﬁle using Media Play, the registration is completed.

✎For more information on DivX® VOD, visit “http://vod.divx.com”.

■

Information: Select to view information about the connected USB

device.

Other Information

Preparing before installing Wall-Mount

for 46", 50" models

To install a wall-mount from another manufacturer, use the Holder-Ring.

✎The product shape may differ

depending on the model.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the

wall.

For detailed information about installing the wall mount, see the

instructions provided with the wall mount kit. Contact a technician for

assistance when installing the wall mount bracket. Samsung Electronics

is not responsible for any damage to the product or injury to yourself or

others if you elect to install the wall mount on your own.

Sound Problem Sound TestPerform the to conﬁrm your TV's audio is working properly.

(Go to - MENU Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too low at

maximum volume.

Check the volume control of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

The picture is good but there is no sound. yIf you are using an external device, check the device’s audio output option. Ex. You may need to change your cable box's

audio option if you have the cable box's audio output connected to your TV using an HDMI cable.

yReboot the connected device by unplugging and then reconnecting the device's power cable.

The speakers are making an inappropriate

noise.

yCheck the cable connections. Make sure a video cable is not connected to an audio input.

yFor Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

yPerform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. yMake sure the AC power cord is securely plugged into the wall outlet and the TV.

yMake sure the wall outlet is working.

yTry pressing the button on the TV to make sure the problem is not caused by the remote. POWER

If the TV turns on, refer to ‘Remote control does not work’ below.

The TV turns off automatically. yEnsure the is set to in the menu.Sleep Timer Off Time

yIf your PC is connected to the TV, check your PC power settings.

yMake sure the AC power cord is plugged into the wall outlet and TV securely.

yWhen you are watching a TV connected to an antenna or to a cable connection, the TV will turn off after 10 - 15 minutes if

there is no signal.

There is no picture/video. yCheck the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

ySet your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For

example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

yMake sure your connected devices are powered on.

yBe sure that the TV is set to the correct source by pressing the button on the remote control.SOURCE

yReboot the connected device by unplugging and then reconnecting the device's power cable.

RF(Cable/Antenna) Connection

The TV is not receiving all channels. yMake sure the coaxial cable is connected securely.

yRun to add available channels to the channel list. Auto Program

Go to - - then select and make sure the correct Cable TV signal type is set in the MENU Channel Auto Program Auto

menu. There are 3 options. ( , , and )STD HRC IRC

yVerify the antenna is positioned correctly.

No Caption on digital channels. yCheck the Caption Setup menu. Try changing to .Caption Mode Service1 CC1

ySome channels may not have caption data.

The picture is distorted: macroblock, error,

small block, dots, pixelization.

yCompression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

movies.

yA weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

yRemove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box

has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen. yHD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

yBlack bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

yAdjust the picture size option on your external device or change the TV to full screen.

The remote control does not work. yReplace the remote control batteries. Make sure you install the new batteries with their polarity (+/-) correct.

yClean the transmission window located on the top of the remote control.

yTry pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

SAMSUNG TV code.

A “ ” message Mode Not Supported

appears.

Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution

settings in this manual.

Caption on the TV menu is greyed out. yYou cannot select in the TV menu when watching content from a device connected via HDMI or Component.Caption

yCaption must be activated on the external device.

There is a plastic smell from the TV. This smell is normal and will dissipate over time.

TV is unavailable in the Signal Strength

Self Diagnosis Test menu.

This function is only available for digital channels received through an Antenna/RF/Coax connection.

TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.

The menu is greyed out Channel

(unavailable).

The menu is only available when you select the TV source. Channel

Your settings are lost after 30 minutes or

every time the TV is turned off.

If TV is in the mode, it will reset audio and picture settings every 30 minutes. Please change from mode Store Demo Store Demo

to mode using the procedure. Press the button to select TV mode, go to Home Use Plug & Play SOURCE MENU →Setup →

Plug & Play →ENTER

You have intermittent loss of audio or video. Check the cable connections and reconnect them.

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible enough for long term

use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

closely at the edge of the frame of the TV.

This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears on

the screen.

Select under mode. For details, refer to (Initial Setup).Home Use Plug & Play Plug & Play

✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or

dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎You can watch detailed troubleshooting videos at www.samsung.com/spsn.

✎Some functions and pictures shown in this manual are available on specific models only.

✎You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com Support). To →

upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB

slot, and then select Support > Software Upgrade in the TV's menu.

Storage and Maintenance

✎If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.

✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, ﬁre, or electric

shock.

Clean the product with a soft cloth

dampened with in a small amount of water.

Do not use a ﬂammable liquid (e.g. benzene,

thinners) or a cleaning agent.

License

DivX Certiﬁed® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofﬁcial DivX Certiﬁed® device that plays DivX video. Visit

divx. com for more information and software tools to convert your ﬁles into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be registered in

order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com

for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX

Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467,

7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered

trademarks & DTS Premium Sound is a trademark of DTS, Inc.

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152,

5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol

together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).



This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation ﬁles (the "Software"), to deal in the Software

without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the

Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright

notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR

HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software

without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

Speciﬁcations

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

Model Name UN19F4000 UN22F5000

Display Resolution 1366 x 768 1920 x 1080

Screen Size

(Diagonal)

19" Class

(18.5" measured diagonally)

22" Class

(21.5" measured diagonally)

Sound

Output 3W x 2

Dimensions (W x H x D)

Body

With stand

17.8 X 11.0 X 1.9 inches

(453.7 X 281.3 X 49.5 (mm))

17.8 X 12.3 X 4.9 inches

(453.7 X 314.2 X 124.9 (mm))

20.2 X 12.6 X 1.7 inches

(513.1 X 321.5 X 43.8 (mm))

20.2 X 14.4 X 6.6 inches

(513.1 X 366.5 X 169.6 (mm))

Weight

Without Stand

With Stand

5.5 lbs (2.5 kg)

5.7 lbs (2.6 kg)

6.3 lbs (2.9 kg)

Model Name UN32F4000 UN32F4050 UN32F5000 / UN32F5050

Display Resolution 1366 x 768 1920 x 1080

Screen Size

(Diagonal)

32" Class

(31.5" measured diagonally)

32" Class

(31.5" measured diagonally)

Sound

Output 10W x 2

Dimensions (W x H x D)

Body

With stand

29.0 X 17.1 X 1.9 inches

(737.9 X 435.8 X 49.5 (mm))

29.0 X 20.0 X 7.5 inches

(737.9 X 509.1 X 191.7 (mm))

29.0 X 17.1 X 1.9 inches

(737.9 X 435.8 X 49.5 (mm))

29.0 X 19.1 X 9.9 inches

(737.9 X 487.0 X 252.6 (mm))

29.0 X 17.5 X 1.9 inches

(738.0 X 445.4 X 49.0 (mm))

29.0 X 19.9 X 7.5 inches

(738.0 X 505.8 X 191.7 (mm))

Weight

Without Stand

With Stand

11.4 lbs (5.2 kg)

12.5 lbs (5.7 kg)

11.4 lbs (5.2 kg)

12.3 lbs (5.6 kg)

11.0 Ibs (5.0 kg)

12.3 Ibs (5.6 kg)

Model Name UN40F5000 / UN40F5050 UN46F5000 / UN46F5050 UN50F5000 / UN50F5050

Display Resolution 1920 x 1080

Screen Size

(Diagonal)

40” Class

(40.0" measured diagonally)

46" Class

(45.9" measured diagonally)

50" Class

(49.5" measured diagonally)

Sound

Output 10W x 2

Dimensions (W x H x D)

Body

With stand

36.5 X 21.7 X 1.9 inches

(928.2 X 552.3 X 49.4 (mm))

36.5 X 24.1 X 9.2 inches

(928.2 X 612.2 X 235.0 (mm))

41.7 X 24.6 X 1.9 inches

(1059.6 X 626.2 X 49.4 (mm))

41.7 X 27.0 X 9.2 inches

(1059.6 X 686.1 X 235.0 (mm))

44.7 X 26.2 X 1.9 inches

(1135.4 X 668.0 X 49.8 (mm))

44.7 X 28.6 X 9.2 inches

(1135.4 X 727.9 X 235.0 (mm))

Weight

Without Stand

With Stand

17.6 Ibs (8.0 kg)

20.9 Ibs (9.5 kg)

23.8 Ibs (10.8 kg)

27.1 Ibs (12.3 kg)

28.6 Ibs (13.0 kg)

31.9 Ibs (14.5 kg)

✎Design and specifications are subject to change without prior notice.

✎This device is a Class B digital apparatus.

✎For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.

✎Typical power consumption is measured according to Energy Star Program requirements for televisions.

✎Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/

recyclingdirect or call, (877) 278-0799.

Wall Mount Kit Speciﬁcations (VESA)

✎The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. If you

are attaching the wall mount to a wall made of building materials other

than drywall, please contact your nearest dealer for information about

the appropriate mounting hardware. If you install the TV on a ceiling or

slanted wall, it may fall and result in severe personal injury.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table

below.

xWhen purchasing our wall mount kit, a detailed installation manual

and all parts necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard

screw specifications.

xDo not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

xFor wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on

the wall mount specifications.

xDo not fasten the screws too firmly. This may damage the product

or cause the product to fall, leading to personal injury. Samsung is

not liable for these kinds of accidents.

xSamsung is not liable for product damage or personal injury when

a non-VESA or non-specified wall mount is used or the consumer

fails to follow the product installation instructions.

xDo not mount the TV at more than a 15 degree tilt.

xAlways have two people mount the TV on a wall.

Product

Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw Quantity

LED-TV

19~22 75 X 75

26-28 100 X 100

32-42 200 X 200

46~60 400 X 400

Do not install your Wall Mount Kit while your

TV is turned on. It may result in personal

injury due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may

cause the TV to fall. In particular, ensure that your children

do not hang over or destabilize the TV. Doing so may cause

the TV to tip over, resulting in serious injuries or death.

Follow all safety precautions provided on the included

Safety Flyer. For added stability, install the anti-fall device for

safety purposes, as described below.

To prevent the TV from falling

✎TV Holder kits are sold separately. To purchase a TV Holder kit,

contact Samsung Customer Care.

1. Insert the screws into the wall brackets and ﬁrmly fasten them to the

wall. Make sure the screws are ﬁrmly ﬁxed to the wall.

✎We strongly recommend you drive the screws into a stud.

2. Insert the screws through the TV brackets, and then fasten the

screws to the top VESA screw holes on the back of the TV.

3. Connect the brackets on the TV and the brackets on the wall with a

strong string or cable, and then tie the string or cable tightly to the

brackets.

✎Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

✎Install the TV close to the wall so that it does not fall.

✎Connect the string or cable so that the brackets on the wall are at

the same height or lower than the brackets on the TV. Untie the

string or cable before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically ﬁx the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

✎Please find a “

” icon on the rear of the TV. The Kensington slot is

beside the “

” icon.

✎The position and color may differ depending on the model.

Assembling the Stand Wire Holder

for 32" and above models

Display Modes (HDMI/DVI Input)

Optimal resolution

4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz

Mode Resolution

Horizontal

Frequency

(KHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync

Polarity

(H / V)

1366 x

768

1920 x

1080

IBM 720 x 400 31.469 70.087 28.322 -/+

c c

MAC

640 x 480 35.000 66.667 30.240 -/-

c c

832 x 624 49.726 74.551 57.284 -/-

c c

1152 x 870 68.681 75.062 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

c c

640 x 480 37.861 72.809 31.500 -/-

c c

640 x 480 37.500 75.000 31.500 -/-

c c

800 x 600 37.879 60.317 40.000 +/+

c c

800 x 600 48.077 72.188 50.000 +/+

c c

800 x 600 46.875 75.000 49.500 +/+

c c

1024 x 768 48.363 60.004 65.000 -/-

c c

1024 x 768 56.476 70.069 75.000 -/-

c c

1024 x 768 60.023 75.029 78.750 +/+

c c

1152 x 864 67.500 75.000 108.000 +/+

1280 x 720 45.000 60.000 74.250 +/+

c c

1280 x 800 49.702 59.810 83.500 -/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+

c c

1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 65.290 59.954 146.250 -/+

1920 x 1080 67.500 60.000 148.500 +/+

Caution of the cover-jack

CAUTION: These servicing instructions are for use by

qualiﬁed service personnel only. To reduce the risk of

electric shock or ﬁre hazard, do not perform any servicing

other than that contained in the operating instructions

unless you are qualiﬁed to do so.

Cover-jack

TV Rear Panel

✎The product shape may differ depending on the model.

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.

com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Flickering and Dimming If your Samsung television is ﬂickering or dimming sporadically, you may need to disable some of its energy efﬁcient features

like the or the feature. Using your remote, follow the steps below to turn these features off or Eco Sensor Energy Saving

on.

yEnergy Saving Setup Eco Solution Energy Saving : MENU → → →

yEco Sensor Setup Eco Solution Eco Sensor : MENU → → → for 5 series

Component Connections /

Screen Color

If you ﬁnd that the color on your Samsung television’s screen is not correct or black and white, ﬁrst run a test Self Diagnosis

on the TV to make sure there are no device issues.

ySelf Diagnosis Support Self Diagnosis Picture Test : MENU → → →

If the test is ok, try making sure:

yYour connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have used the

AV Out jack on your video source.

yTry making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,

and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the

blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.

Screen Brightness If you ﬁnd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you

should check before calling for a repair.

yBacklight Contrast Brightness Sharpness Color Tint (G/R) Picture, , , , , and so on. Go to “ ” on the User Menu, and then

try adjusting these options.

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No

Signal Power Off feature.

First make sure your is not accidentally set. The Sleep Time allows you the comfort of falling asleep with the TV Sleep Timer

still on but, turns it off after a certain period of time so as not to waste energy.

ySleep Timer Setup Time Sleep Timer : MENU → → →

If the Sleep Timer is not activated, you may have engaged the or feature.No Signal Power Off Auto Power Off

yNo Signal Power Off Setup Eco Solution No Signal Power Off : MENU → → →

yAuto Power Off Setup Eco Solution Auto Power Off : MENU → → →

Trouble Powering On Before you turn the TV on, ﬁnd the red light on the right or left bottom of your TV. Press the power on button on the

TV or remote and the light should blink about 5 times before the TV turns on.

If you ﬁnd that you are having trouble powering on your Samsung television, there are a number of things to check before

making a call to the service department.

yIf you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the

power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the

mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have

a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the

signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the

screen displays the guide or info data, the problem is caused by the box.

Stand Assembly If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.

Cannot ﬁnd channel Re-run plug and play.

Poor picture Picture TestFirst, perform the and to see if your TV is properly displaying the test image.

Go to - - - MENU Support Self Diagnosis Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as it

did in the store.

If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high

deﬁnition) picture quality.

Cable/Satellite subscribers: Try HD channels from the channel line up.

Air/Cable Antenna connection: Try HD channels after running Auto program.

✎Many HD channels broadcast SD contents upscaled to HD. The picture quality of upscaled SD content is low.

yAdjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock error,

small block, dots, pixelization.

yCompression of video contents may cause picture distortion, especially on fast moving pictures such as pictures from

sports and action movies.

yA weak signal can cause picture distortion. This is not a TV problem.

yMobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause color problems or a blank screen.

There is poor color or brightness. yAdjust the Picture options in the TV menu. (Go to )Picture Mode / Color / Brightness / Sharpness

yAdjust the option in the TV menu. (Go to - - - )Energy Saving MENU Setup Eco Solution Energy Saving

yTry resetting the picture to view the default picture setting. (Go to - )MENU Picture - Picture Reset

There is a dotted line on the edge of the

screen.

yIf the picture size is set to , change it to 16:9.Screen Fit

yChange the cable/satellite box resolution.

The picture is black and white. yIf you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component input 1 on the

TV.

When changing channels, the picture

freezes or is distorted or delayed.

yIf the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord and wait until

the cable box reboots. It may take up to 20 minutes.)

ySet the output resolution of the cable box to 1080i or 720p.

JACK PANEL DETAIL / REAR VIEW

■

UN19F4000 / UN22F5000

(Unit:

inches

)