Samsung PA43H4000AR Bedienungsanleitung

Samsung Fernsehen PA43H4000AR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung PA43H4000AR (2 Seiten) in der Kategorie Fernsehen. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Figures and illustrations in this User Manual are provided for reference only and

may differ from actual product appearance. Product design and speciﬁcations

may be changed without notice.

User Instructions

yScreen Image retention

Do not display a still image (such as on a video game) on the plasma display panel

for more than several minutes as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the

degree of brightness and contrast of the screen when displaying a still image.

yHeat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates

from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

yThe product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a

change in the surrounding environment such as temperature or humidity. This is

normal and not a defect of the unit.

yCell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level)

pixels which require sophisticated technology to produce. However, there may be

a few bright or dark pixels on the screen. These pixels will have no impact on the

performance of the product.

yAvoid operating the TV at temperatures below 41°F (5°C)

yA still image displayed too long may cause permanent damage to the PDP

Panel.

Watching the Plasma TV in 4:3 format for a long period of time

may leave traces of borders displayed on the left, right and

centre of the screen caused by the difference of light emission

on the screen. Playing a DVD or a game console may cause

similar effects to the screen.

Damages caused by the above effect are not covered by the

Warranty.

yAfter-images on the Screen.

Displaying still images from Video games for longer than a certain period of time may

produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still

images for a long time.

yWarranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Contact SAMSU D WIDENG WORL

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

Country Customer Care Centre Web Site

AUSTRALIA 1300 362 603 www.samsung.com/au

NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz

CHINA 400-810-5858 www.samsung.com

HONG KONG (852) 3698 4698 www.samsung.com/hk

(Chinese)

www.samsung.com/hk_en

(English)

INDIA 1800 3000 8282

1800 266 8282

www.samsung.com/in

INDONESIA 0800-112-8888 (Toll Free)

(021) 56997777

www.samsung.com/id

JAPAN 0120-327-527 www.samsung.com

MALAYSIA 1800-88-9999 www.samsung.com/my

PHILIPPINES 1-800-10-7267864 [PLDT]

1-800-8-7267864 [Globe landline

and Mobile]

02-4222111 [Other landline]

www.samsung.com/ph

SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg

THAILAND 0-2689-3232,

1800-29-3232

www.samsung.com/th

TAIWAN 0800-32-9999 www.samsung.com/tw

VIETNAM 1 800 588 889 www.samsung.com

GEORGIA 0-800-555-555 www.samsung.com

ARMENIA 0-800-05-555 www.samsung.com

AZERBAIJAN 088-55-55-555 www.samsung.com

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com

KYRGYZSTAN 00-800-500-55-500 www.samsung.com

TADJIKISTAN 8-10-800-500-55-500 www.samsung.com

MONGOLIA +7-800-555-55-55 www.samsung.com

BELARUS 810-800-500-55-500 www.samsung.com

MOLDOVA 0-800-614-40 www.samsung.com

ALGERIA 0800 100 100 www.samsung.com/n_

africa

PAKISTAN 0800-Samsung (72678) www.samsung.com/pk/

TUNISIA 80-1000-12 www.samsung.com/n_

africa

For personal and non-commercial use only.

Usage is subject to following the guidelines in the User Manual and

may not be available in all regions.

Plasma TV

user manual

BN68-05775A-01

Important Safety Instructions Getting Started

Accessories

yRemote Control & Batteries (AAA x 2)

yOwner’s Instructions

yWarranty Card / Regulatory Guide (Not available in some locations)

yPower Cord

yCable Holder Assembling the Cable Holder

Input Cables (Sold Separately)

yComposite (AV)

yComponent

yCoaxial (RF)

yHDMI

TV Controller (Panel Key)

The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.

Remote control sensor

TV Controller

The image is drawn by

facing the front side of

the TV.

Function menu

Return

Selecting the Media Play

Selecting a Source

Selecting the Menu

Power off

✎Exits the menu when pressing the controller more than 1 second.

✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you

cannot operate it to move the up/down/left/right directions.

Setup (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the button. Set the POWER

initial setup following instructions that the TV guides.

✎Connecting the power cord and aerial. (refer to ‘Connections’)

Connections

yFor better picture and audio quality, connect to a digital device using an HDMI

cable.

yThe picture may not display normally (if at all) or the audio may not work if an

external device that uses an older version of HDMI mode is connected to the TV. If

such a problem occurs, ask the manufacturer of the external device about the HDMI

version and, if out of date, request an upgrade.

yBe sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display

or a connection error may occur.

yFor set-top box connection using HDMI cable, we highly recommend you to

connect the port.HDMI IN 1(STB)

yThe TV model is not allowed for PC connection (distortion or incorrect picture

displaying can appear).

Changing the Input Source

Source List

Use to select TV or other external input sources such as DVD / Blu-ray

players / cable box / STB satellite receiver connected to the TV.

1. Press the SOURCE button.

2. Select a desired external input source.

■

TV / HDMI1 / HDMI2 / AV / Component

✎You can only choose external devices that are connected to the TV.

In the , connected inputs are highlighted.Source

How to use Edit Name

Edit Name lets you associate a device name to an input source. To

access , press the button in . Name the Edit Name TOOLS Source List

device connected to the input jacks to make your input source selection

easier.

Information

You can see detailed information about the selected external device.

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Installing batteries (Battery size: AAA)

✎NOTE

• Use the remote control within 23 feet from TV.

• Bright light may affect the performance of the remote control. Avoid using nearby special ﬂuorescent light or neon signs.

• The Colour and shape may vary depending on the model.

Alternately select Teletext ON, Double, Mix or OFF. Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Use these buttons in a speciﬁc feature.

E-MANUAL : Not available.

: Display the mode. Screen&Sound Capture

SLEEP : Automatically shuts off the TV at a preset time.

Cuts off the sound temporarily.

: Turns the Sports Mode / Soccer Mode

on or off.

: Turns the on or off. Cricket Mode

(Depending on the Country)

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Displays and selects the available video

sources.

Use these buttons according to the direction

on screen.

Changes channels.

Displays the main on-screen menu.

Views the .Media Play

Adjusts the volume.

A B C D

E-MANUAL

SLEEP

Broadcasting Menu

Memorizing channels

Auto Tuning

(depending on the country)

✎Automatically allocated programme numbers may not correspond to

actual or desired programme numbers. If a channel is locked, the PIN

input window appears.

Using the Channel menu

Channel List

The contains the channels your TV displays when you press Channel List

the channel button. You can view channel information, or All Favourites

1-5 Mode. Press (►) button to change the channel mode.

✎When you press the button on the remote control, CH LIST Channel

List screen will be displayed at once.

Channel Mode

■

Edit Favourites: Set channels you watch frequently as favourites.

✎For detailed information about using , refer to “Edit Favourites Edit

Favourites”.

■

Favourites 1-5: Shows all favourite channels, arranged in up to ﬁve

groups. Each group has a separate screen.

✎The TV displays only if you have added favourites Favourites 1-5

using .Edit Favourites

■

All: Shows all currently available channels.

Schedule Manager

You can set a desired channel to be displayed automatically at the

intended time. In addition, you can view, modify or delete a channel you

have reserved to watch.

✎You must set the current time first using the Time →Clock Set

function in the menu to use this function.System

1. Schedule Schedule ManagerPress the on the screen. The Schedule

Viewing menu appears.

2. Press the / / / buttons to set each option menu.▲▼◄►

■

Channel: Select the desired channel.

■

Repeat Once Manual Sat~Sun Mon~Fri Everyday: Select , , , or to

set at your convenience. If you select , you can set the day you Manual

want.

✎The (

) mark indicates the day you’ve selected.

■

Date: You can set the desired date.

✎It is available when you select in .Once Repeat

■

Start Time: You can set the start time you want.

✎If you want to edit or cancel a reserved schedule, select the reserved

schedule on . Then press the Schedule Manager ENTER

button

and select the or .Edit Delete

Edit Channel

You can edit or delete channels.

1. Edit ChannelGo to screen.

2. Press the buttons to select the desired channel, then press ▲/▼

the ENTER

button. The (

) mark indicates the channel you’ve

selected.

✎You can select more than one channel.

✎Press the ENTER

again to deselect the channel.

Using the coloured and function buttons with the Edit Channel

■a

Red (Change Number): Changes channel order on the channel list.

−

(Done): Completes changing the channel order.

■b

Green (Delete): Deletes a channel from the channel list.

■{

Yellow (Lock / Unlock): Lock a channel so that the channel cannot

be selected and viewed. / Unlock the channel that you locked.

✎This function is available only when the is set to .Channel Lock On

✎The PIN input screen appears. Enter your 4-digit PIN. Change the PIN

using the option.Change PIN

■}

Blue (Select All / Deselect All): Selects or deselects all channels

at once.

■

(Go To): Goes to channel directly by pressing numbers (0~9).

■k

(Page): Move to previous or next page.

■T

(Tools): Displays the option menu. The option menu items that

appear may differ depending on the channel status and type.

−Category All, Recently Viewed, : Changes the channel mode to

Most Viewed. The selected channel mode is displayed.

−Edit Favourites Edit Favourites: Go to screen directly.

−Rename channel: Assign a name of up to ﬁve characters to a

channel. For example, Food, Golf, etc. This makes it easier to ﬁnd and

select the channel.

−Channel Info: Display details of the selected channel.

−Information: Display details of the selected programme.

Edit Favourites

You can add, edit or delete favourite channels.

1. Edit FavouritesGo to screen.

2. Press the buttons to select the desired channel, and then press ▲/▼

ENTER

button.

3. Favourites 1-5Choose a speciﬁc favourite list among using

(Change Fav.) button, and then press the

}

( ) button. The Add

selected channel has been added in .Favourites 1-5

✎One favourite channel can be added in several of favourites among

Favourites 1-5.

Using the coloured and function buttons with the Edit Favourites

■a

Red (Category / Change order)

−Category All, Recently Viewed: Changes the channel mode to ,

Most Viewed. The selected channel mode is displayed.

−Change order: Changes the favourite channel order.

( ): Completes changing the channel order.Done

■b

Green (Change Fav.) Favourites 1-5: Changes favourite list among .

■{

Yellow (Select All / Deselect All) : Selects or deselects all channels

at once.

■}

Blue (Add / Delete)

−Add Favourites 1-5: Adds selected channels to .

−Delete Favourites 1-5: Deletes the favourite channel from .

■

(Go To): Goes to channel directly by pressing numbers (0~9).

■k

(Page): Move to previous or next page.

■T

(Tools): Displays the option menu. The option menu items that

appear may differ depending on the channel status and type.

−Copy to favourites: Copy the selected favourite channel in

Favourites 1-5. You can add from other favourite list.

−Rename Favourites: Assign your own favourite channel name.

−Edit Channel Edit Channel: Go to screen directly.

−Information: Display details of the selected programme.

Other Features

Channel Settings

■

Area

(depending on the country)

You can change the desired area.

■

Manual Tuning

Scans for a channel manually and stores in the TV.

✎If a channel is locked, the PIN input window appears.

✎According to the channel source, Manual Tuning may be supported.

1. NewPress the button.

2. Programme, Colour System, Sound System, ChannelSet the and

Search.

3. StorePress the button. When scanning has ﬁnished, a channel is

updated in the channel list.

✎Channel mode

−P (programme mode): When tuning is complete, the broadcasting

stations in your area have been assigned to the position numbers

from P0 to P99. You can select a channel by entering the position

number in this mode.

−C S Z (aerial channel mode) / or (cable channel mode) (depending

on the country): These two modes allow you to select a channel

by entering the assigned number for each aerial broadcasting

station or cable channel.

■

Fine Tune

If the signal is weak or distorted, ﬁne tune the channel manually.

✎Fine tuned channels are marked with an asterisk “*”.

✎To reset the fine-tuning, select .Reset

■

Transfer Channel List

(depending on the country)

Imports or exports the channel map. You should connect a USB storage to

use this function.

✎The PIN number input screen appears. Enter your 4 digit PIN number.

✎Supported file systems are FAT and exFAT.

Channel Lock

Lock channels in Channel menu to prevent unauthorized users, such as

children, from watching unsuitable programme.

✎Available only when the is set to .Source TV

Picture Menu

Changing the Preset Picture Mode

Picture Mode

Select your preferred picture type.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

Adjusting Picture Settings

Cell Light / Contrast / Brightness / Sharpness /

Colour / Tint (G/R)

Your television has several setting options for picture quality control.

✎In analogue TV, AV modes of the PAL system, the function Tint (G/R)

is not available.

✎Settings can be adjusted and stored for each external device

connected to the TV.

✎Lowering picture brightness reduces power consumption.

Picture Size

Set the various picture options such as picture size and aspect ratio.

✎The available items may differ depending on the selected mode.

✎Depending on the input source, the picture size options may vary.

■

Picture Size

: Your cable box/satellite receiver may have its

own set of screen sizes as well. However, we highly recommend you

use 16:9 mode most of the time.

−16:9: Sets the picture to 16:9 wide mode.

−Wide Zoom: Magniﬁes the picture size more than 4:3.

✎Adjusts the by using , buttons.Position ▲ ▼

−Zoom: Magniﬁes the 16:9 wide pictures vertically to ﬁt the screen size.

✎Adjusts the or by using , button.Zoom Position ▲ ▼

−4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and centre of the screen may cause

image retention (screen burn) which are not covered by the

warranty.

−Screen Fit: Displays the full image without any cut-off when HDMI

(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are

inputted.

■

Zoom/Position: Adjust the picture size and position. It is only available

in .Zoom

■

Position Screen Fit: Adjust the picture position. It is only available in or

Wide Zoom.

✎The available items may differ depending on the selected mode.

✎Settings can be adjusted and stored for each external device

connected to an input on the TV.

✎If you use the function with HDMI 720p input, 1 line will be Screen Fit

cut at the top, bottom, left and right as in the overscan function.

Input Source Picture Size

ATV/AV 16:9, Wide Zoom, Zoom, 4:3

Component(480i, 480p, 576i,

576p, 720p) 16:9, Wide Zoom, Zoom, 4:3

Component(1080i, 1080p) 16:9, Wide Zoom, Zoom, 4:3, Screen Fit

HDMI(720p, 1080i, 1080p) 16:9, Wide Zoom, Zoom, 4:3, Screen Fit

PIP

You can watch the TV tuner and one external video source

simultaneously. (Picture-in-Picture) does not function in the same PIP

mode.

✎If you turn the TV off while watching in PIP mode, the PIP window

will disappear.

✎You may notice that the picture in the PIP window becomes slightly

unnatural when you use the main screen to view a game or karaoke.

PIP Settings

Main picture Sub picture

Component, HDMI TV / AV

■

PIP: Activate or deactivate the PIP function.

■

Source: Select the source for the sub-screen.

■

Channel: Select the channel for the sub-screen.

■

Size: Select a size for the sub-picture.

■

Position: Select a position for the sub-picture.

■

Sound Select: You can choose the desired sound ( / ) in Main Sub

PIP mode.

Changing the Picture Options

Advanced Settings

(available in mode)Standard / Movie

You can adjust the detailed setting for the screen including colour and

contrast.

■

Dynamic Contrast: Adjust the screen contrast.

■

Black Tone: Select the black level to adjust the screen depth.

■

Flesh Tone: Adjust the ﬂesh tone colour.

■

RGB Only Mode: Displays the Red, Green and Blue colour for

making ﬁne adjustments to the hue and saturation.

■

Colour Space: Adjust the range of colours available to create the

image.

■

White Balance: Adjust the colour temperature for a more natural

picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red,

green, blue) darkness.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green,

blue) brightness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)

brightness.

Reset White Balance: Resets the to its default settings.

■

Gamma: Adjust the primary colour intensity.

■

Motion Lighting: Reduce power consumption by brightness control

adapted motion.

✎Only available in mode.Standard

✎When changing a setting value of , or Cell Light Brightness

Contrast Motion Lighting, will be set to Off.

Picture Options

■

Colour Tone

✎Warm1 Warm2 or will be deactivated when the picture mode is

Dynamic.

✎Settings can be adjusted and stored for each external device

connected to an input on the TV.

■

Digital Clean View: If the broadcast signal received by your TV is

weak, you can activate the feature to reduce any Digital Clean View

static and ghosting that may appear on the screen.

✎When the signal is weak, try other options until the best picture

is displayed.

Auto Visualisation: When changing analogue channels, displays

signal strength.

✎Only available for analogue channels.

✎When the button is pressed, the signal strength bar is INFO

displayed.

✎When bar is green, you are receiving the best possible signal.

■

MPEG Noise Filter: Reduces MPEG noise to provide improved

picture quality.

■

HDMI Black Level: Selects the black level on the screen to adjust the

screen depth.

■

Film Mode: Sets the TV to automatically sense and process ﬁlm

signals from all sources and adjust the picture for optimum quality.

✎Available in TV mode and external input mode which supports SD

(480i / 576i) and HD (1080i).

✎If the screen does not seem natural, change its option to / Off

Auto1 Auto2 Film Mode / in .

■

Analog Clean View: Reduces diagonal noise in picture caused by the

crosstalk of signals.

Picture Off

The screen is turned off but the sound remains on. Press any button

except volume button to turn on the screen.

Reset Picture

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Mode

Sound Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sound to allow a

better listening experience for the hearing impaired.

ANT OUT

AUDIO OUT

L-AUDIO-R

VIDEO OUT

AUDIO OUT

L-AUDIO-R

COMPONENT OUT

PRPBY

RBG

GRW

SERVICE

AUDIO IN

L-AUDIO-R

HDMI OUT

Power Input

TV Rear Panel

TV Side Panel

VHF/UHF Aerial

Cable

USB

HDMI connection

Set-top Box / Blu-ray players

Audio connection

Ampliﬁer / Home Theater

Component connection

Blu-ray player / DVD

AV connection

VCR

✎The side panel may differ

depending on the model. ✎The PDP device may interfere with an amateur radio or AM radio.

✎When using two-way radio mobile and portable units or amateur

radio or AM radio near by your TV, this may cause the TV to

malfunction.

PA43H4000 PA43H4100

For India Only

This marking on the product, accessories or literature indicates

that the product and its electronic accessories should not be

disposed of with other household waste at the end of their

working life. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, please

separate these items from other types of waste and recycle

them responsibly to promote the sustainable reuse of material

resources.

For more information on safe disposal and recycling visit our website

www.samsung.com/in or contact our Helpline numbers - 18002668282,

180030008282.

• Theslots and openings in the    cabinet and in the   back or bottom provided for   are  necessary ventilation. ensure reliable operation  To   of this apparatus,  

and to protect it fromoverheating, these slots and openings must never be blocked or covered.

-Do not cover the slots and openings with acloth or other materials.

-Do not block the slots and openings by placing this apparatus on abed, sofa, rug or other similar surface.

-Do not place this apparatus in aconned space, such as abookcase or built-in cabinet, unless proper ventilation is provided.

• Donot place this apparatus near or overa radiator or heat register, or where it   is exposed to direct sunlight. 

• Donot place avessel containing water (vases etc.) on this apparatus, as this can result in  arisk of reor electric shock.

• Do not expose this apparatus to rain or place it near water (near bathtub, washbowl, kitchen sink, or laundry tub, in wet basement, or near            a         a    a

swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• Makesureto pull out the power cord fromthe outlet beforecleaning.

• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the                      

environment.Please contact your  local authorities for disposal or recycling information. 

• Donot overload wall outlets, extension cords, or  adaptors beyond their capacity, since this can result in or re electric shock.

• Power-supply cords should be routed so that they not likely to be walked on or pinched by items placed upon or against them. Pay particular        are                 

attention to cords at the plug end, where connected  to adaptors, and at the point wherethey exit from the apparatus.

• protect this apparatus from lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet andTo    a                      

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local                       

electrical supply. (depending on the model)

• Neverinsert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• avoid electricTo  shock, never touch the inside of this apparatus. Onlya qualied technician should open this apparatus. 

• Make sure to plug the power cord in until it is rmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do not                             

touch the power cord with wet hands.

• If this appratus does not operate normally      - in particular, if there any unusual sounds or smells coming from it unplug it immediately and contact   are        -     

an authorized dealer or service center.

• Besure to pull  the power plug out   of the outlet if   the TV is to   remain unused or if you to leave the   are   house for an extended   period of time  (especially

when children, elderly or   disabled people will be left alone in the house).

-Accumulated dust can  cause an electric shock, an  electric leakage, orare   by causing the power cord to generate sparks and heat,  or cause the

insulation to deteriorate.

• Be sure to contact an authorized service center, when installing your set in location with heavy dust, high or low temperatures, high humidity,            a          

chemical substances or where   it will operate for 24 hours     a     day such as in an airport, traina station, etc. Failure to   do so may cause serious damage     

to your set.

• Useonlyaproperly grounded plug and receptacle.

-An improper groundmay cause electric shock or equipment damage. (Class lEquipment only.)

• turn the apparatus completely, youTo  off    must pull the power   plug out of the   wall socket. Consequently, the   power plug should be   readily accessible 

at all times.

• Donot allow childrento hang onto the product.

• Store the accessories (batteries, etc.) in alocation safely out of the reach of children.

• Donot install the product in  an unstable location such asa shaky self,a slanted oor, or alocation exposed to vibration.

• Donot drop or  imparta shock to the product. If the product is  damaged, disconnect the power cordand contact aservice center.

• clean the product, unplug the power cord from the power outlet and wipe the product using soft, dry cloth. Do not use any chemicals suchTo                a         

as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the                     

product.

• Donot expose the apparatus todripping or splashing.

• Donot dispose of batteries inare.

• Donot short circuit,disassemble, or overheat the batteries.

• notshort circuit, disassemble,  or overheat the batteries.

• There is adanger of explosion if you replace the batteries with the wrongtype of battery. Replace only with the same or equivalent type.

• WARNING- TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES FROM THIS AWAY  PRODUCT ALL AT TIMES.

Warning! Important Safety Instructions

(Please read the safety instructions below before installing and using the product.)

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE          

COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. RE          -

FER ALL SERVICING TO QUALIFIED  PERSONNEL.

RISK OF ELECTRIC SHOCK. DO NOT OPEN

This symbol indicates that high voltage is present inside. It         

is dangerous to make any kind of contact with any internal          

part of this  product.

This symbol indicates that important literature concerning      

operation and maintenance has been included with this       

product

To see Analog channels clearly, prevent the

antenna cables from contacting the rear of the TV.

Connect the antenna cables directly without using

a divider

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

[PH4000-AR]BN68-05775A-01ENG.indb 1 2014-01-27  2:39:38

Adjusting Sound Settings

Sound Effect

(standard sound mode only)

■

DTS TruSurround: This function provides a virtual 5.1 channel

surround sound experience through a pair of speakers using HRTF

(Head Related Transfer Function) technology.

■

DTS TruDialog: This function allows you to increase the intensity of

a voice over background music or sound effects so that dialogue can

be heard more clearly.

■

Equaliser: Use Equaliser to customize sound setting for each

speaker.

−Balance: Adjusts the balance between the right and left speaker.

−100Hz / 300Hz / 1kHz / 3kHz / 10kHz: (Bandwidth Adjustment)

Adjusts the level of speciﬁc bandwidth frequencies.

−Reset: Resets the equaliser to its default settings.

Speaker Settings

■

Speaker Select

: A sound echo may occur due to a

difference in decoding speed between the main speaker and the

audio receiver. In this case, set the TV to .External Speaker

✎When is set to , the volume Speaker Select External Speaker

and buttons will not operate and the sound settings will be MUTE

limited.

✎When is set to .Speaker Select External Speaker

xTV Speaker External Speaker On: Off, :

✎When is set to .Speaker Select TV Speaker

xTV Speaker On External Speaker On: , :

✎If there is no video signal, both speakers will be mute.

■

Auto Volume: To equalize the volume level on each channel, set to

Normal.

Night: This mode provides an improved sound experience compared

to mode, making almost no noise. It is useful at night.Normal

✎To use the volume control on the source device connected to the

TV, set Auto Volume to Off on the TV. Otherwise, a change to the

volume control of the source device may not be applied.

Reset Sound

Reset all sound settings to the factory defaults.

Selecting the Sound Mode

When you set to , the current sound mode is displayed on the Dual I-II

screen.

Audio Type Dual I-II Default

A2 Stereo

Mono Mono Automatic change

Stereo Stereo ↔ Mono

Dual Dual I Dual II↔Dual I

NICAM Stereo

Mono Mono Automatic change

Stereo Stereo ↔ Mono

Dual Mono → Dual I

  Dual II Dual I

✎If the stereo signal is weak and an automatic switching, occurs, then

switch to the mono.

✎Only activated in stereo sound signal.

✎Only available when the is set to .Source TV

System Menu

Executing initial setup

Setup

Conﬁgure the channels and the time when setting up the TV for the ﬁrst

time or when resetting the unit.

✎Execute the initial setup following instructions that the TV guides.

✎Enter your 4-digit PIN, the default of which is 0-0-0-0.

Setting the Time

Time

The current time will appear every time you press the button.INFO

■

Clock Set Date Time: Set the and .

✎You can set the and directly by pressing the number Date Time

buttons on the remote control.

■

Sleep Timer

: Automatically shuts off the TV after a preset

period of time. (30, 60, 90, 120, 150 and 180 minutes)

✎Use the / buttons to select a period of time, and then press ▲ ▼

ENTER

. To cancel the , select .Sleep Timer Off

■

On Timer:

You can set up three separate conﬁgurations. On Timer

( , , )On Timer 1 On Timer 2 On Timer 3

Setup Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun: Select or

Manual Manual to set at your convenience. If you select , you can set

up the day you want to activate the timer.

✎The

mark indicates the day you’ve selected.

Time: Set the hour and minute.

Volume: Set the desired volume level.

Source: To select the source of the content that will play when the TV

turns on. You can:

- Select and have the TV display a specific air or cable channel.TV

- Select and have the TV play back photo or audio files from a USB

USB device.

- Select a source on your TV that you have connected a set-top box

to, and have the TV display a channel from the set-top box.

✎The USB device must be connected to your TV before you can

select .USB

✎If you select a source other than or , you must:TV USB

xHave a cable or satellite set-top box attached to that source.

xSet the set-top box to the channel you want to watch when the

TV goes on.

xLeave the set-top box turned on.

✎When you select a source other than Channel options will TV

disappear.

Channel Source TV: (when the is set to ) Select the desired channel.

Music / Photo Source USB: (when the is set to ) Select a folder in the

USB device containing music or photo ﬁles to be played when the TV

is turned on automatically.

- If there is no music file on the USB device or the folder containing

a music file is not selected, the timer function does not operate

correctly.

- When there is only one photo file in the USB device, the slide show

will not play.

- If a folder name is too long, the folder cannot be selected.

- Each USB you use is assigned its own folder. When using more

than one of the same type of USB, make sure the folders assigned

to each USB have different names.

- It is recommended that you use a USB memory stick and a multi

card reader when using .On Timer

- The On Timer function may not work with USB devices with a built-

in battery, MP3 players, or PMPs made by some manufacturers

because these devices take a long time to be recognised.

■

Off Timer:

You can set up three separate conﬁgurations. Off Timer

( , , Off Timer 1 Off Timer 2 Off Timer 3)

Setup Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun: Select or

Manual Manual to set at your convenience. If you select , you can set

up the day you want to activate the timer.

✎The

mark indicates the day you’ve selected.

Time: Set the hour and minute.

Other Features

Menu Language

Set the menu language.

Eco Solution

■

Energy Saving: This adjusts the brightness of the TV in order to

reduce power consumption.

■

No Signal Power Off: To avoid unnecessary energy consumption, set

how long you want the TV to remain on if it’s not receiving a signal.

■

Auto Power Off: The TV will be automatically turned off when no user

operation is received for 4 hours.

✎If the option is set to , the TV will stay on even Auto Power Off Off

if no operations are performed on the TV.

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped with Pixel

Shift screen burn prevention technology. Pixel Shift moves the picture

slightly on the screen. function setting allows you Auto Protection Time

to programme the time between movement of the picture in minutes.

Your TV also has the following additional screen burn protection

functions:

■

Pixel Shift: Using this function, you can set the TV to move pixels

minutely on the PDP screen in a horizontal or vertical direction to

minimize after images on the screen.

✎Available Pixel Shift Settings and Optimum Settings

Item TV / HDMI

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎The value may differ depending on the monitor size Pixel Shift

(inches) and mode.

✎This function is not available in the mode.Screen Fit

■

Auto Protection Time: If the screen displays a still image for a certain

period of time you deﬁne, the TV activates the screen saver to prevent

the formation of burnt in ghost images on the screen.

■

Scrolling: This function removes after-images on the screen by

illuminating all the pixels on the PDP according to a pattern. Use

this function when there are after images or symbols on the screen,

especially when you displayed a still image on the screen for a long

time.

✎The after-image removal function has to be executed for a long

time (approximately 1 hour) to effectively remove after-images on

the screen. If the after-image is not removed after you apply the

function, repeat the function again.

✎Press any key on the remote control to cancel this feature.

■

Side Grey: When you watch TV with the screen ratio set to 4:3, using

the function can prevent damage to the edges of the Side Grey

screen by adjusting the white balance on the extreme left and right

sides.

General

■

Game Mode: When connecting to a game console such as

PlayStation™ or Xbox™, you can enjoy a more realistic gaming

experience by selecting game mode.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external

device, set to in the setup menu.Game Mode Off

xIf you display the TV menu in , the screen shakes Game Mode

slightly.

✎Game Mode TV is not available in mode.

✎After connecting the game console, set to . Game Mode On

Unfortunately, you may notice reduced picture quality.

✎If is :Game Mode On

xPicture Mode Standard Sound Mode is set to and is set to

Movie.

■

Panel Lock: Lock or unlock all the keys on the panel.

■

Boot Logo: Display Samsung logo when the TV is turned on.

Change PIN

Change your password required to set up the TV.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

DivX® Video On Demand

Shows the registration code authorized for the TV. If you connect to

the DivX web site and register with 10-digit registration code, you can

download the VOD activation ﬁle.

Once you play it using , the registration is completed.Videos

✎For more information on DivX® VOD, visit http://vod.divx.com.

Application Menu

Using the Source List

Source List

✎When you press the button, screen will be SOURCE Source

displayed at once.

✎You can only choose external devices that are connected to the TV.

In , connected inputs are highlighted.Source

✎For the detailed information, refer to “Changing the Input Source”.

Using the Media Play

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and movie ﬁles to the

USB port on the side of the TV.

3. When USB is connected to the TV, popup window appears. You can

select the , or directly.Photos Videos Music

✎It might not work properly with unlicenced multimedia files.

✎Need-to-Know List before using Media Play

xMTP (Media Transfer Protocol) is not supported.

xSupported file systems are FAT and exFAT.

xCertain types of USB Digital camera and audio devices may not be compatible

with this TV.

xMedia Play only supports sequential jpeg format.

xMedia Play only supports USB Mass Storage Class (MSC) devices. MSC is a

Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb

drives, Flash Card Readers (USB HUB are not supported). Devices should be

connected directly to the TV’s USB port.

xBefore connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data

file damage or data loss.

xThe HDD (Hard Disk Drive) connected to USB is not supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to display on the

screen.

xThe maximum supported JPEG resolution is 15360 x 8640 pixels.

xFor unsupported or corrupted files, the “Not Supported File Format” message

is displayed.

xThe scene search and thumbnail functions are not supported in the .Videos

xMP3 files with DRM that have been downloaded from a non-free site cannot

be played. Digital Rights Management (DRM) is a technology that supports

the creation, distribution and management of the content in an integrated and

comprehensive way, including the protection of the rights and interests of the

content providers, the prevention of the illegal copying of contents, as well as

managing billings and settlements.

xPTP connection mode is fully available only with digital cameras. When

connecting a smartphone or tablet to the TV using PTP mode, it may not be

recognised.

xA USB device that requires high power (more than 500mA or 5V) may not be

supported.

xIf the TV has been no input during time set in , the screen Auto Protection Time

saver will run.

xThe power-saving mode of some external hard disk drives may be released

automatically when connected to the TV.

xIf a USB extension cable is used, the USB device may not be recognised or the

files on the device may not be read.

xIf a USB device connected to the TV is not recognised, the list of files on the

device is corrupted or a file in the list is not played, connect the USB device to

the PC, format the device and check the connection.

xIf a file deleted from the PC is still found when Media Play is run, use the “Empty

the Recycle Bin” function on the PC to permanently delete the file.

xIf the number of files and folders saved on a USB storage device is approximately

over 4000, the files and folders may not appear and some folders may not be

opened.

Disconnecting a USB Device

1. Press the SOURCE button.

2. Select a desired USB device, and then press the button. The TOOLS

Tools menu appears.

3. Disconnect USB DeviceSelect , and then wait until the selected USB

device is disconnected. You can remove a USB device from the TV.

✎To remove a USB device from the TV, we recommend use Disconnect

USB Device function.

Using the Media Play

Enjoy photos, music and movie ﬁles saved on a USB Mass Storage Class

(MSC) device.

1. Press the MEDIA.P button.

2. Press / button to select desired menu ( , , ), ◄ ► Photos Videos Music

then press the ENTER

button.

3. Press / button to select desired device, then press the ◄ ► ENTER

button again.

4. Press the / / / button to select the desired ﬁle in the list, then ▲▼◄►

press the ENTER

button or

∂

(Play) button.

Playing the selected ﬁles

1. OptionsPress the button to select ▲ at the top of each main screen

and select .Play Selected

2. Select the desired ﬁles.

✎The check box appears to the left of the selected files.

✎Press ENTER

button again to deselect the file.

3. PlayPress the button to select ▲.

✎You can select or deselect all files pressing the Select All /

Deselect All.

Playing the Photos / Videos / Music

During playing a ﬁle, press the / / / button to select the desired ▲▼◄►

menu.

✎When the option menu is not displayed, press the button or TOOLS

ENTER

button.

✎You can also use

∂

∑

∫

buttons on the remote control

during playback.

✎If you press the button during playback, you can view the INFO

playback information.

Playback menu

Button Operation Photos Videos Music

/ Previous / Next ●

/ Start Slide Show / Stop

Slide Show ●

Play / Pause Mini

Player* ● ●

/ Previous / Next Mini

Player* ● ●

/ Rewind / Fast forward ● ●

* When setting the to in , these Background Music Mini Player Photos

buttons appear.

Setting menu

■

Photos

Button Operation

Slideshow Settings You can set the and during the Speed Effects

slide show.

Zoom You can zoom into images in full screen mode.

Rotate You can rotate images in full screen mode.

Background Music

/ Mini Player

You can set background music when watching

a slide show. / You can control simple playback

menus.

Settings Picture Mode / Sound Mode: You can adjust

the picture or sound setting.

Information: You can see detailed information

about the played ﬁle.

✎During the slide show, all files in the file list will be displayed in order.

✎When you press the

∂

(Play) button (or button ▲ → Options →

Slide Show) in the file list, slide show will be started immediately.

✎During the slide show, you can adjust the slide show speed using

(REW) or

(FF) button.

xSupported Photo Formats

File Extension Type Resolution

*.jpg / *.jpeg JPEG 15360 X 8640

*.bmp BMP 4096 X 4096

*.mpo MPO 15360 X 8640

✎The MPO type file does not support Zoom, Rotate and Slide Show

Effect functions.

■

Videos

Button Operation

Search Search Titles: You can choose the other ﬁle

directly.

Search Time Bar: You can search the video

using and button at one minute interval or ◄ ►

entering the number directly.

✎It may not be supported depending on the

input source.

Repeat Mode You can play movie ﬁles repeatedly.

Picture Size You can adjust the picture size to your

preference.

Settings Subtitle Settings: You can play the video with

subtitles. This function only works if the subtitles

are the same ﬁle name as the video.

Picture Mode / Sound Mode: You can adjust

the picture or sound setting.

Audio Language: You can change the audio

language if the video has more than one

language.

Information: You can see detailed information

about the played ﬁle.

✎If video time information is unknown, play time and progress bar are

not displayed.

✎In this mode, you can enjoy movie clips contained on a Game, but you

cannot play the Game itself.

xSupported Video Formats

File

Extention Container Video Codec Resolution Frame

rate (fps) Bit rate

(Mbps) Audio

Codec

*.avi / *.mkv

*.asf /

*.wmv

*.mp4 /

*.3gp

*.vro /

*.mpg

*.mpeg

/ *.ts

*.tp / *.trp

*.mov / *.ﬂv

*.vob / *.svi

*.divx

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO

VOB

DivX 3.11/4/5/6

1920 x 1080

6~30

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG

(MP3)

DTS (Core)

G.711(A-

Law, μ-Law)

MPEG4 SP/

ASP

H.264 BP/

MP/HP

Motion JPEG 640 x 480 8

Window Media

Video v9

1920 x 1080 30MPEG2

MPEG1

✎Other Restrictions

xVideo content will not play, or not play correctly, if there is an error in the

content or the container.

xSound or video may not work if the contents have a standard bit rate/frame

rate above the compatible Frame/sec listed in the table.

xIf the Index Table is in error, the Seek (Jump) function is not supported.

xSome USB/digital camera devices may not be compatible with the player.

xThe menu can be displayed late if the video is over 10Mbps(bit rate).

Video decoder Audio decoder

ySupports up to H.264, Level 4.1 (FMO/

ASO/RS are not supported.)

yframe rate :

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max

yVC1 AP L4 is not supported.

yGMC 2 or higher is not supported.

yWMA 10 Pro supports up to 5.1

channel and M2 proﬁle.

yWMA lossless audio is not supported.

yVorbis supports up to 2ch.

yDD+ supports up to 5.1 channel.

xSupported Subtitle Formats

External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced

SubStation Alpha .ass

Powerdivx .psb

Internal

Name Container Format

Xsub AVI Picture

Format

SubStation Alpha MKV Text Format

Advanced

SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed

text MP4 Text Format

■

Music

Button Operation

Repeat You can play music ﬁles repeatedly.

Shufﬂe You can play the music randomly.

Sound Mode You can adjust the sound setting.

✎Only displays the files with supported music file extension. Other file

extensions are not displayed, even if they are saved on the same

USB device.

✎If the sound is abnormal when playing music files, adjust the

Equaliser Sound in the menu. (An over-modulated music file may

cause a sound problem.)

xSupported Music Formats

File Extension Type Codec Remark

*.mp3 MPEG MPEG1 Audio

Layer 3

*.m4a / *.mpa /

*.aac MPEG4 AAC

*.ﬂac FLAC FLAC Supports up to 2ch.

*.ogg OGG Vorbis Supports up to 2ch.

*.wma WMA WMA

WMA 10 Pro supports up to 5.1 channel

and M2 proﬁle. (WMA lossless audio is not

supported.)

*.wav wav wav

*.mid / *.midi midi midi type 0 and type 1

Media Play - Additional Functions

Videos/Music/Photos Play Option menus

When playing a ﬁle, select the .Options

Category Operation Videos Music Photos

Copy

for PDP 4100 series

Copy the ﬁles to the other USB

device.

ccc

Encoding

Set the encoding language if the

text you want to view does not

appear correctly.

Device Format

for PDP 4100 series Format the USB device.

ccc

Delete

for PDP 4100 series Delete the ﬁles in the USB device.

ccc

Using the Soccer Mode(Cricket Mode)

Soccer Mode(Cricket Mode)

(depending on the country)

This mode provides optimised condition for watching sports games.

✎When the is on, the picture and Soccer Mode(Cricket Mode)

sound modes are set to automatically.Stadium

✎If you turn the TV off while watching , Soccer Mode(Cricket Mode)

the will be disable.Soccer Mode(Cricket Mode)

Using the Screen&Sound Capture

function

Screen&Sound Capture

This function provides capture screen or record an audio from the TV

screen being viewing. Additionally, you can save the capture image

and record audio on the USB device connected the TV. This function

provides the TV screen you watched capture image and record audio.

■

Screen&Sound Capture

: Turn the Screen&Sound Capture

function on or off.

■

Default Capture Device: You can set the default device for saving

captured image ﬁles and recorded audio ﬁles.

✎This function is only available when the USB device is connected

the TV.

✎If the function is running, this function is Screen&Sound Capture

not available.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the colour pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

Software Update

The menu lets you upgrade your TV’s software to the Software Update

latest version.

Current version: This is the software version already installed in the TV.

✎When software is upgraded, video and audio settings you have

made will return to their default settings. We advise you to write

down your settings so that you can easily reset them after the

upgrade.

■

Update now

By USB: Insert a USB drive containing the ﬁrmware upgrade ﬁle,

downloaded from “www.samsung.com” into the TV.

✎Please be careful not to disconnect the power or remove the USB

drive until upgrades are complete. The TV will be turned off and

on automatically after completing the firmware upgrade.

Use Mode

Select the suitable for your place. We strongly recommend Use Mode

you select .Home Use

■

Home Use Home Use: is the default setting.

■

Store Demo Store Demo: is for retail environments only. If you select

Store Demo, some functions will not work, and the picture settings

will be reset every 30 minutes.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can ﬁnd information regarding our call

centres, and how to download products and software.

Other Information

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the TV on

the wall. For detailed information on installing the wall mount, see the

instructions provided with the wall mount. Contact a technician for

assistance when installing the wall mount bracket. We do not advice you

to do it yourself.

Samsung Electronics is not responsible for any damage to the product

or injury to yourself or others if you select to install the TV on your own.

Wall Mount Kit Speciﬁcations (VESA)

✎Wall mount kit is not supplied but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When

attaching to other building materials, please contact your nearest dealer.

If installed on a ceiling or slanted wall, it may fall and result in severe

personal injury.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table below.

xWhen purchasing our wall mount kit, a detailed installation manual and all

parts necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard screw

specifications.

xDo not use screws longer than the standard dimension, as they may cause

damage to the inside of the TV set.

xFor wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on their

specifications.

xDo not fasten the screws too strongly, this may damage the product or cause

the product to fall, leading to personal injury. Samsung is not liable for these

kinds of accidents.

xSamsung is not liable for product damage or personal injury when a non-VESA

or non-specified wall mount is used or the consumer fails to follow the product

installation instructions.

xDo not exceed 15 degrees tilt when mounting this TV.

Models QuantityVESA Spec. (A * B) Standard Screw

PA43H4000

PA43H4100 400 X 400 M8 4

Do not install your Wall Mount

Kit while your TV is turned on. It

may result in personal injury due

to electric shock.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g.

walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an

increase in the internal temperature of the product.

✎When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

xIf you use parts provided by another manufacturer, it may result in a problem

with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand. Installation with a wall-mount.

10 cm

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the

TV to fall. In particular, ensure that your children do not hang over or

destabilize the TV; doing so may cause the TV to tip over, resulting in

serious injuries or death. Follow all safety precautions provided on the

included Safety Flyer. For added stability, install the anti-fall device for

safety purposes, as follows.

To avoid the TV from falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall.

Conﬁrm that the screws have been ﬁrmly installed onto the wall.

✎You may need additional material such as an anchor depending

on the type of wall.

✎Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

2. Remove the screws from the centre back of the TV, put the screws

into the clamps, and then fasten the screws onto the TV again.

✎Screws may not be supplied with the product. In this case, please

purchase the screws of the following specifications.

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the

wall with a strong string and then tie the string tightly.

✎Install the TV near to the wall so that it does not fall backwards.

✎It is safe to connect the string so that the clamps fixed on the wall

are equal to or lower than the clamps fixed on the TV.

✎Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check

connections for any sign of fatigue for failure. If you have any doubt

about the security of your connections, contact a professional

installer.

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to

physically ﬁx the system when using it in a public place. The appearance

and locking method may differ from the illustration depending on the

manufacturer. Refer to the manual provided with the Kensington Lock for

additional information on proper use.

✎Please find a “

” icon on the rear of the TV. The Kensington slot is

beside the “

” icon.

✎The position and colour may differ depending on the model.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object

such as desk or chair.

2. Slide the end of the cable with the lock attached through the looped

end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product.

4. Lock the lock.

✎These are general instructions. For exact instructions, see the User

manual supplied with the locking device.

✎The locking device has to be purchased separately.

Troubleshooting

If the TV seems to have a problem, ﬁrst try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit “www.samsung.

com”, then click on Support, or call Samsung customer service centre.

Issues Solutions and Explanations

Picture Quality

First of all, please perform the Picture Test and conﬁrm that your TV is properly displaying test image.

(go to - - - MENU Support Self Diagnosis Picture Test)

If the test image is properly displayed, the poor picture may caused by the source or signal.

The TV image does not look as good as it did in

the store.

yIf you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver

SD (Standard deﬁnition) picture quality.

yCable/Satellite subscribers: Try digital stations from the channel line up.

yAerial connection: Try digital stations after performing Auto tuning.

yAdjust the Cable/Set top box video output resolution to 480p.

yMake sure you are watching the TV at the minimum recommended distance based on the size and deﬁnition of the

signal.

The picture is distorted: macroblock error, small

block, dots, pixelization

yCompression of video contents may cause picture distortion especially in fast moving pictures such as sports and action

movies.

yLow signal level or bad quality can cause picture distortion. This is not a TV issue.

yMobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

Colour is wrong or missing. yIf you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect

or loose connections may cause colour problems or a blank screen.

There is poor colour or brightness. yAdjust the options in the TV menu. (go to / / / )Picture Picture Mode Colour Brightness Sharpness

yAdjust option in the TV menu. (go to - - - )Energy Saving MENU System Eco Solution Energy Saving

yTry resetting the picture to view the default picture settings. (go to - - MENU Picture Reset Picture)

There is a dotted line on the edge of the screen. yIf the picture size is set to , change it to .Screen Fit 16:9

yChange cable/satellite box resolution.

The picture is black and white. yIf you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the

TV.

When changing channels, the picture freezes or is

distorted or delayed.

yIf connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box

reboots. It may take up to 20 minutes.

ySet the output resolution of the cable box to 480p.

Sound Quality

First of all, please perform the Sound Test to conﬁrm that your TV audio is properly operating.

(go to - - - MENU Support Self Diagnosis Sound Test)

If the audio is ok, the sound problem may be caused by the source or signal.

There is no sound or the sound is too low at

maximum volume.

yPlease check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.

The picture is good but there is no sound. yIf you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.

yIf you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s

audio option to HDMI when you have a HDMI connected to your TV).

yReboot the connected device by reconnecting the device’s power cable.

The speakers are making an inappropriate noise. yCheck the cable connections. Make sure a video cable is not connected to an audio input.

yFor aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.

No Picture, No Video

The TV will not turn on. yMake sure the AC power cord is securely plugged in to the wall outlet and the TV.

yMake sure the wall outlet is working.

yTry pressing the button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The POWER

remote control does not work” below.

The TV turns off automatically. yEnsure the is set to in the menu.Sleep Timer Off Time

yMake sure the AC power cord is plugged in securely to the wall outlet and the TV.

yWhen watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.

You can not play 3D videos in some of the BD

players.

yTake out the disk from player and put it again, or restart the BD player.

There is no picture/video. yCheck cable connections (remove and reconnect all cables connected to the TV and external devices).

ySet your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.

For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

yMake sure your connected devices are powered on.

yBe sure to select the TV’s correct source by pressing the button on the remote control.SOURCE

yReboot the connected device by reconnecting the device’s power cable.

Issues Solutions and Explanations

Aerial (Air/Cable) Connection

The TV is not receiving all channels. yMake sure the Aerial cable is connected securely.

yPlease try (Initial setup) to add available channels to the channel list. Go to - - (Initial setup) Setup MENU System Setup

and wait for all available channels to be stored.

yVerify the Aerial is positioned correctly.

The picture is distorted: macro block error small

block, dots, pixelization

yCompression of video contents may cause picture distortion, especially on fast moving pictures such as sports and

action movies.

yA low signal can cause picture distortion. This is not a TV issue.

Others

The picture will not display in full screen. yHD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

yBlack bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

yAdjust the picture size options on your external device or TV to full screen.

Plasma TV is making humming noise. yPlasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to

create the images on the screen.

yIf the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.

yYou can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try

rerouting your connection cables.

yImproper installation of wall mount can create excessive noise.

Image Retention (Burn In) Issue. yTo minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel

Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The

regular, slight movement of the picture reduces screen burn in.

The remote control does not work. yReplace the remote control batteries with the poles (+/–) in the right direction.

yClean the sensor’s transmission window on the remote.

yTry pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control doesn’t turn

the TV on or off, or adjust the volume.

yProgramme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

SAMSUNG TV code.

A “ ” message appears. Mode Not Supported yCheck the supported resolution of the TV, and adjust the external device’s output resolution accordingly.

There is a plastic smell from the TV. yThis smell is normal and will dissipate over time.

TV is tilted to the right or left side. yRemove the stand base from the TV and reassemble it.

There are difﬁculties assembling the stand base. yMake sure the TV is placed on a ﬂat surface. If you can not remove the screws from the TV, please use a magnetized

screw driver.

The menu is grey out (unavailable). Broadcasting yThe menu is only available when the TV source is selected.Broadcasting

Your settings are lost after 30 minutes or every

time the TV is turned off.

yIf the TV is in the mode, it will reset audio and picture settings every 30 minutes. If you want to change the Store Demo

settings from mode to , press the button to select TV mode, and go to Store Demo Home Use SOURCE MENU →

Support Use Mode →.

You have intermittent loss of audio or video. yCheck the cable connections and reconnect them.

yLoss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible enough for

long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look closely at

the edge of the frame of the TV.

yThis is part of the product’s design and is not a defect.

The menu is not available. PIP yPIP functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 minutes ago, and it

turned on again.

yIt is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade ﬁrmware downloaded whilst your

watching TV.

There are recurrent picture/sound issues. yCheck and change the signal/source.

A reaction may occur between the rubber cushion

pads on the base stand and the top ﬁnish of

some furniture.

yTo prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

The message “This ﬁle may not be playable

properly.” appears.

yThis may appear because of high bit rate of content. Content generally will play but could experience some playability

issue.

✎You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com Support) by USB.→

Storage and Maintenance

✎If you remove the attached sticker on the TV screen, clean the residues and then watch TV.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, ﬁre, or electric

shock.

Clean the product with a soft cloth

dampened with in a small amount of

water. Do not use a ﬂammable liquid

(e.g. benzene, thinners) or a cleaning

agent.

Speciﬁcations

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10 to 40 (50 to 104 )

10% to 80%, non-condensing

-20 to 45 (-4 to 113 )

5% to 95%, non-condensing

Model Name PA43H4000

PA43H4100

Display Resolution 852 X 480

Screen Size 109 cm

Sound

Output 10W X 2

Dimensions (W x H x D)

Body

With stand

100.74 X 61.62 X 5.57 cm

100.74 X 67.05 X 26.19 cm

Weight

Without Stand

With Stand

13.6 kg

14.8 kg

✎Design and specifications are subject to change without prior notice.

✎For information about the power required and more about power consumption, refer to the label attached to the product.

Licence

DivX Certiﬁed® to play DivX® video up to HD 1080p,

including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofﬁcial DivX Certiﬁed® device that has

passed rigorous testing to verify that it plays DivX video. Visit divx.com for more

information and software tools to convert your ﬁles into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to

vod.divx.com for more information on how to complete your registration.

DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or

its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;

7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together are

registered trademarks, and DTS Premium Sound is a

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together

are registered trademarks and DTS Studio Sound is a

The terms HDMI and HDMI High-Deﬁnition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the

United States and other countries.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on

the product menu. Open Source License Notice is written only English.

- 10 -- 9 -

- 14-- 13 -

- 11 -

- 15 -

- 12 -

- 16 -

[PH4000-AR]BN68-05775A-01ENG.indb 2 2014-01-27  2:39:47

Produktspezifikationen

Marke:	Samsung
Kategorie:	Fernsehen
Modell:	PA43H4000AR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Samsung PA43H4000AR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fernsehen Samsung

Samsung QN85QN800AF Bedienungsanleitung

16 Oktober 2024

Samsung UA70RU7200K Bedienungsanleitung

13 Oktober 2024

Samsung UN55F7100AF Bedienungsanleitung

13 Oktober 2024

Samsung UE65TU7022KXXH Bedienungsanleitung

12 Oktober 2024

Samsung LN22A330 Bedienungsanleitung

11 Oktober 2024

Samsung QN75QN90AAF Bedienungsanleitung

9 Oktober 2024

Samsung SyncMaster 731BA Bedienungsanleitung

8 Oktober 2024

Samsung UN46ES6003F Bedienungsanleitung

4 Oktober 2024

Samsung Crystal UHD 85AU8000 Bedienungsanleitung

4 Oktober 2024

Samsung QE55LST7TCUXXN Bedienungsanleitung

3 Oktober 2024

Bedienungsanleitung Fernsehen

Neueste Bedienungsanleitung für -Kategorien-

Sony KE-65A8 Bedienungsanleitung

16 Oktober 2024

Thomson 24TM2490 Bedienungsanleitung

16 Oktober 2024

Daewoo DSJ-5520 Bedienungsanleitung

15 Oktober 2024

Sharp LC-52D65U Bedienungsanleitung

15 Oktober 2024

Hisense 50A7100FTUK Bedienungsanleitung

15 Oktober 2024

Salora LCD 1941 DVX Bedienungsanleitung

15 Oktober 2024

Grundig 65 CUA 7390 Mailand Bedienungsanleitung

15 Oktober 2024

Grundig 50 GUB 6300 Bedienungsanleitung

15 Oktober 2024

Grundig 40 CFA 6490 Venedig Bedienungsanleitung

15 Oktober 2024

Grundig 55 GOB 9480 Bedienungsanleitung

15 Oktober 2024