Samsung CS-20H2Z Bedienungsanleitung

Samsung Fernseher CS-20H2Z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung CS-20H2Z (8 Seiten) in der Kategorie Fernseher. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

English - 1

➢The actual configuration of your TV may be different,

depending on your model.

Connection Panel (depending on the model)

cable television

network

Rear Panel

☛Whenever you connect an audio or video system to your

television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the Œ (75 Ω

coaxial socket).

To view television channels correctly, a signal must be

received by the set from one of the sources: an outdoor

aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it

when tuning your television until you obtain a picture that is

both sharp and clear.

Connecting to the SCART Input/Output

The SCART connector is used for equipment, such as a´

VCR, DVD, decoder, satellite receiver, video game device, or

video disc player.

continued...

☛Please be sure to match the color coded input terminals

and cable jacks.

Connecting to the RCA Input

The Œ ( - /AUDIO L R) and ´ (VIDEO) connectors are used

for equipment, such as a camcorder, video disc player, or

video game device.

Connecting Headphones

The ˇ (headphone) jack is used for watching a television

programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage

your hearing.

➢When both the front (or side) AV and rear connectors

are connected to external equipment, the front (or

side) AV receives priority.

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

ŒAudio input

´Video input

ŒAudio input

ˇHeadphone jack

Front (or Side) Panel

Connecting to the RCA Input

The RCA connectors are used for equipment, such as a¨

VCR, DVD, decoder, satellite receiver, video game device, or

video disc player. (When using the mono equipment, connect

to the AUDIO-L input connector.)

Connecting to the RCA Output

The RCA connectors are used for equipment, such as aˇ

recording VCR or audio system.

➢The actual configuration of your TV may be different,

depending on your model.

Control Panel (depending on the model)

◆You can use the buttons to switch the TV on when it isˇ

in standby mode depending on the model.

◆The ´ ˇand buttons also have the same function as the

œ √ † …/ / / buttons on the remote control.

◆If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

television.

Front (or Side) Panel

ŒOn-screen menu display

´Volume adjustment

ˇChannel selection

¨Standby indicator

ˆRemote control sensor

ØPower on/off

AA68-03121B-02

English - 2

∏

∏MENU

Used to display the on-

screen menu or return to

the previous menu.

”

” …

…

/ †

†

/ œ

/ √

√

Used to control the

cursor in the menu.

’

’DUAL I-II (option)

Used to select the

sound mode.

˝GAME (option)

Used to enjoy the game

programmed in the TV.

ÔTURBO (option)

Used to select the turbo

sound option.



S.MENU (option)

Used to display the

sound menu.

ÒPRE-CH

Used to switch

repeatedly between the

last two channels

displayed.

ÚVIDEO

Used to display all of the

available video sources.

ÆP /

Used to display the next

or previous stored

channel.

ıINFO

Used to view the

channel information and

setting status you

selected.

˜EXIT

Used to exit from any

display or return to

normal viewing.

¯ENTER

While using the on-

screen menus, press the

ENTER button to

activate (or change) a

particular item.

˘P.SIZE

Used to change the

screen size.

¿SLEEP

Used to select a preset

time interval for

automatic shut off.

¸P.MODE

Used to select the

picture effect.

˛S.MODE (option)

Used to select the

sound effect.

ŒPOWER

Used to switch the TV

on and off.

´Numeric buttons

Used to select channels

directly.

-/--

Used to select a channel

numbered ten or over.

Press this button, then

“

” symbol is

displayed. Enter the

two-digit channel

number.

¨MUTE

Used to switch the

sound off temporarily. To

turn the sound back on,

press the MUTE, , or

button.

ˆ/

Used to increase or

decrease the volume.

ØTV

Used to return to the TV

mode when it is in

external input mode.

➢Operation of remote control may be affected by bright

artificial light near to the TV.

Remote Control

(depending on the model)

Installing Batteries

Remove the cover. Install two AAA

size batteries, then replace the cover.

When the remote control does not

operate normally, check that the “+” and “

” ends of the

batteries are inserted correctly or the batteries are drained.

➢Do not mix battery types, i.e. alkaline and manganese.

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

➢The main voltage is indicated on the rear of the

television and the frequency is 50 or 60Hz.

2Press the button (On/Off) on the front (or side) of the

television.

3Press the POWER button on the remote control to

switch the television on. The programme that you were

watching last is re-selected automatically. If you have

not yet stored any channels, no clear picture appears.

Refer to “Channel - Auto Store” or “Channel - Manual

Store” on page 4.

➢If the television is initially powered on, several basic

customer settings proceed automatically. Refer to

“Function - Plug & Play” on page 3.

4To switch the television off, press the button (On/Off)

on the front (or side) of the television.

Switching the Television On and Off

The television can be placed in standby mode, in order to

reduce power consumption and wear of the cathode ray

tube. Standby mode can be useful when you wish to

interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while

viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

☛Do not leave the television in standby mode for long

periods of time (when you are away on holiday, for

example). Turn the television off by pressing the

button (On/Off) on the front (or side) of the television. It

is best to unplug the set from the mains and aerial.

Placing the Television in Standby Mode

English - 3

4Press the œ √or button to

search the channels. The

searching starts. To stop the

search, press the MENU

button.

5When the channel

searching has finished, the

Time menu is displayed

with Clock selected.

6Press the œ √or button to move to the hour or minute.

Set the hour or minute by pressing the … †or button.

7When you have finished,

press the MENU button.

The ENJOY YOUR WATCHING is displayed, and then the

channel which has been stored will be activated.

Re-setting the Plug & Play

Method: MENU ➜… †/

( / /Function) ➜œ √ …➜†

( /Plug & Play) ➜œ √

Viewing the Menus

1Press the MENU button.

The main menu is displayed on the screen. Its left side

has four icons: Picture Sound Channel, , , and

Function.

2Press the … †or button to select one of the icons.

Press the button to access the icon’s sub-menu.œ √or

3Press the … †or button to move to items in the menu.

Press the button to enter items in the menu.œ √or

4Press the … † œ √/ / / button to change the selected

items. Press the button to return to the previousMENU

menu.

5Press the EXIT button to exit from the menu.

Function - Plug & Play

When the television is initially

powered on, several basic

customer settings proceed

automatically and subsequently. The following settings are

available.

1If the television is in standby

mode, press the POWER

button on the remote

control.

The Plug & Play is

displayed. It flickers for a

little while, and then

Language menu is

displayed.

2Select the appropriated language by pressing the …or

†button. Press the MENU button.

The Ant. Input Check is displayed.

➢If any language is not selected, the language menu

will disappear about 30 seconds later.

3Make sure that the antenna is connected to the

television (refer to page 1).

continued...

Plug & Play

Time

Clock -- : -- am

Move Exit

ENJOY YOUR WATCHING

Function

Language : English

Time √

√

Plug & Play √

√

Blue Screen : Off

Child Lock √

√

Select Enter Exit

Ant. Input Check

Auto Store Exit

Language

English

Indonesia

Malaysia

Adjust Select

Standard screen format televisions (4:3, the aspect

ratio of the screen width to height) are primarily

designed to view standard format full-motion video.

The images displayed on them should primarily be in

the standard 4:3 ratio format and constantly moving.

Displaying stationary graphics and images on screen,

such as the dark top and bottom letterbox bars (wide

screen pictures), should be limited to no more than

15% of the total television viewing per week.

Wide screen format televisions (16:9, the aspect ratio

of the screen width to height) are primarily designed to

view wide screen format full-motion video. The images

displayed on them should primarily be in the wide

screen 16:9 ratio format, or expanded to fill the screen

if your model offers this feature, and constantly

moving. Displaying stationary graphics and images on

screen, such as the dark side-bars on non-expanded

standard format television video and programming,

should be limited to no more than 15% of the total

television viewing per week.

Additionally, viewing other stationary images and text

such as stock market reports, video game displays,

station logos, web sites or computer graphics and

patterns, should be limited as described above for all

televisions. Displaying any stationary images that

exceed the above guidelines can cause uneven aging

of picture tubes (CRTs) that leave subtle, but

permanent burned-in ghost images in the television

picture. To avoid this, vary the programming and

images, and primarily display full screen moving

images, not stationary patterns or dark bars.

On television models that offer picture sizing features,

use these controls to view the different formats as a

full screen picture.

Be careful in the selection and duration of television

formats used for viewing. Uneven CRT aging as a

result of format selection and use, as well as other

burned-in images, is not covered by your Samsung

limited warranty.

Important Warranty Information

Regarding Television Format Viewing

P 1

471 MHz 48%

Exit

Produktspezifikationen

Marke:	Samsung
Kategorie:	Fernseher
Modell:	CS-20H2Z

Brauchst du Hilfe?

Wenn Sie Hilfe mit Samsung CS-20H2Z benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Fernseher Samsung

Samsung CS-29M21BP Bedienungsanleitung

14 Oktober 2024

Samsung CS-29A11PQ Bedienungsanleitung

12 Oktober 2024

Samsung CS-20H2Z Bedienungsanleitung

10 Oktober 2024

Samsung CS-29Z57M1 Bedienungsanleitung

8 Oktober 2024

Samsung QE85QN95CAT Bedienungsanleitung

10 August 2024

Samsung CS-21Z58Z3Q Bedienungsanleitung

14 Juli 2024

Samsung CS-21M21MH Bedienungsanleitung

14 Juli 2024

Samsung CS-29M17MH Bedienungsanleitung

13 Juli 2024

Samsung CS-29V10MN Bedienungsanleitung

12 Juli 2024

Samsung CS21B850FL Bedienungsanleitung

12 Juli 2024

Bedienungsanleitung Fernseher

Neueste Bedienungsanleitung für -Kategorien-

Sylvania 6720FDD Bedienungsanleitung

16 Oktober 2024

Sylvania 3913LCV Bedienungsanleitung

16 Oktober 2024

JVC AV-2108TE Bedienungsanleitung

16 Oktober 2024

Sylvania 4913CLT Bedienungsanleitung

16 Oktober 2024

Sylvania 6420FB Bedienungsanleitung

15 Oktober 2024

Sylvania 6419TA Bedienungsanleitung

13 Oktober 2024

Sony KP-53S4 Bedienungsanleitung

11 Oktober 2024

Daewoo DTQ-13P2FC Bedienungsanleitung

11 Oktober 2024

Sylvania 6419TEY Bedienungsanleitung

9 Oktober 2024

MarQuant MCT-1477TXT Bedienungsanleitung

8 Oktober 2024